GD&T Runout Definition | EMachineShop,com

Home » What Is Run Out In Machining » GD&T Runout Definition | EMachineShop,com

Maybe your like

Home Geometric Dimensioning & Tolerancing GD&T Tolerance DefinitionsGD&T Runout Definition GD&T Runout Definition ×

General Cost-Saving Machining Tips

Download the FREE guide to learn how to:
  • Design for low-cost manufacturing
  • Select the most suitable materials and finishes
  • Communicate effectively with machinists
Download » I agree to receive tips and service updates eMachineShop

In GD&T, runout tolerance is used to control the location of a circular part feature relative to its axis.  This is different than circularity, which controls overall roundness.  Runout is usually applied to parts with circular cross sections that must be assembled like drill bits, segmented shafts, or machine tool components.  Runout helps to limit the axis offset of two parts to ensure they can spin and wear evenly.

An example of runout tolerance is shown below.  In the top figure the runout symbol is applied to the angled surface.   The boxed symbols can be read “each circular element of this surface must have full indicator movement (FIM) of less than 0.1 relative to datum A”.  The bottom figure shows a sample measurement taken at one cross section, but multiple measurements are required to verify runout.  Note that the indicator is applied perpendicular to the measured surface, and that this tolerance controls only individual circular elements and not the whole surface simultaneously (see total runout).

runout2

Tag » What Is Run Out In Machining