11 Tips To Safely Extract Stuck Tractors And Farm Equipment From Mud

Weather changes year-round, and situations like rain, snow, and ice can complicate a day’s work in the field. Fields become very muddy when snow melts away, or harsh rain comes falling. These conditions can cause your tractor to get stuck. Extracting your stuck tractors from mud takes time, and time is already precious when you’re making field preparations for spring planting.

How to Recover a Tractor Stuck in Mud: 11 Tips

With time being a precious commodity on the farm, it’s best to stay prepared and maintain safe practices when extracting stuck tractors or other machinery. Read our top 11 tips for recovering your stuck tractor.

1. Be Equipped with the Right Recovery Tools

Use recovery straps designed to recover a vehicle from any sticky situation. You want the pulling equipment rated 1 or 1.5 times the weight of the stuck machinery. With that in mind, we carry recovery straps with break strengths from 20,000 – 400,000 lbs, variations from 1- to 4-ply design, so you get the width you want with the strength you need, and CORDURA at the eyes of the strap to resist wear and tear.

If you need help deciding which of our heavy-duty tiedown straps is right for you, a custom length or would like to purchase in large volumes, call us at 800-969-6543!

The terms recovery straps and tow straps are used interchangeably, but it’s important to note that both cannot be used for all the same purposes. Read our guide to vehicle towing and recovery straps to learn the differences.

2. Use a Formula to Calculate Required Minimum Recovery Capacity

To effectively extract a stuck tractor in the mud, sand, gravel, snow, etc., you’ll need to do some quick calculations. From our blog on Extracting a Stuck Vehicle, there is a formula to calculate the required minimum recovery capacity:

Minimum Required Capacity = W + ARR + AGR


(W = total vehicle weight, ARR = additional rolling resistance, AGR = additional gradient resistance)

Find the Total Vehicle Weight of Your Tractor or Farming Equipment. 

Know the size of the stuck equipment to pull its weight. Unload anything inside the stuck vehicle, as this may help the extraction process. The lighter the stuck vehicle is, the easier it may be to move and the less force it will have against your towing vehicle.

Finding Additional Rolling Resistance (ARR)

Part of using the formula that comes in handy to how deep the machinery is calculating the additional rolling resistance (ARR). You need more towing power and recovery equipment with high load ratings when the tires get buried deep into the surface or drag on the ground

ARR equals the surface on which the vehicle is stuck or will need to get over to become free. Different surface types have different multipliers that, when multiplied by total vehicle weight, give you the ARR. Below gives multipliers for different surface types:

Calculating gradient resistance (AGR) 

Gradient resistance (AGR) is the degree of slope on which the extraction may take place. The greater the slope, the higher the multiplier. Just take the total weight of the stuck vehicle and multiply by the appropriate multiplier. Read below the table of multipliers for different degrees of slope: 

15° Slope	(W x .25)
20° Slope	(W x .33)
30° Slope	(W x .5)
45° Slope	(W x .75)

 

Read the image below as an example of how to apply the equation:

3. Get Towing Vehicle as Close as Possible to the Stuck Tractor or Equipment

The shorter the attachment between the towing vehicle and stuck equipment, the less chance it’ll cause injury if there is flying debris. When the connection is short, debris is likely to hit the tailgate than the windshield. 

However, ensure the attachments are long enough so the towing vehicle stays on solid ground. Having at least 25 feet of cable, rope, strap, or chain will allow some flexibility.

4. Try to Only Make Two Attachment Points

The two attachment points are to the towing vehicle and the stuck vehicle. Don’t make knots in the recovery straps, as the strap is at its full strength when flat. Tying the straps together reduces the overall power and defeats the purpose of what they can do.

5. Keep the Tailpipe Uncovered

Exhaust gases build up inside the stuck vehicle, so inspect the tailpipe of the stuck vehicle by making sure the exhaust gases are ventilating and not stuck in the mud or obstructed. If stuck in the mud, dig around the tailpipe.

6. Raise or Consider Disconnecting the Trailer or Attached Implements

If the wheels of your tractor start to spin, try raising the implement and engaging the differential lock if the tractor has one. Then, assess the muddy area and determine whether or not you try and make it through without getting stuck. If you do go through, keep the implement raised and don’t stop while proceeding.

If you need to remove the trailer or implement, consider separating the load from the stuck vehicle to help with the extraction (if done safely). Disconnecting trailers should be a last resort, as it can lead to other troubles, such as being damaged or harder to reach.

7. Dig Mud Away and Place Boards Behind Tractor

If the tip above doesn’t work, digging mud away from your wheels may help with the extraction process. Shovel dirt from the front and back of the wheels, and place boards behind the tractor in line with the wheels. Boards can provide the traction needed to back out slowly of the mud.

8. Pull in a Straight Line when Possible

The best way to pull is to pull forward and straight. It also helps to pull the stuck vehicle backwards, depending on the situation. For example, if your vehicle ran off into a muddy area, it would be easier to pull it backwards than go through the field. 

9. Make Sure Towing Vehicle Has Traction

Don’t get the vehicle stuck in the mud or other sticky situations. This defeats the purpose of extracting the stuck vehicle. Good traction will help the stuck vehicle to come out.

10. Inspect Equipment and Recovery Tools

This is NOT an accurate representation of recovery straps to extract a tractor. This is to show how to inspect a tiedown and other accessories and how to neatly put together.

Check the equipment that you pulled out after the extraction. The deeper the tractor was in the mud, the more important the inspection is. A few parts to check would be the spinner or guard, hoses, fittings, wagon, lights, brake lines, fuel tanks, and exhaust systems.

Also, inspect your recovery tools for any breaks, damages, or defects. Do not use tiedowns if you notice burns, tears, holes, broken stitching, or abrasion. If the chain, clevis, or hook has stress cracks or other signs of damage, it is not good to use again.

Dry and clean tiedowns before storing away to avoid mold or mildew, and store any other recovery tools in a safe place. If you leave them out, you risk them deteriorating if they get rained on and under harsh conditions of sunlight. If the tools are still in good operating condition, this will come in handy the next time you’re in a sticky situation. 

11. If Unsure of Performing Extraction, Don’t Sweat and Call a Professional

If you assessed how badly the equipment is stuck and believe further damage may result if you continue, call a professional. It’s better to be safe and avoid any injury, and have some help to recover your equipment. 

NOTE: This article contains safety information about the use of synthetic web slings. However, it does not include all the information you need to know about handling, lifting, and manipulating materials and loads safely. Sling use is only one part of a lifting system, and it’s your responsibility to consider all risk factors before using any rigging device or product. Failure to do so may result in severe injury or death due to sling failure and/or loss of load.

At US Cargo Control, we believe you deserve the highest quality products to get the job done. If you have any questions about our towing & auto hauling accessories, please call our team at 800-969-6543 or email us at [email protected].