3 Ways To Pry Off A Watch Backing Without Proper Tools - WikiHow
Maybe your like
- Log in / Sign up
- Using a Thumbnail or Razor Blade |
- Using a Rubber Ball |
- Using Scissors |
- Video |
- Expert Interview |
- Expert Q&A |
- Tips
This article was co-authored by Bill Green. Bill Green is an Expert Jeweler and Appraiser. He is also the Founder & Creative Director of Jewelry & Timepiece Mechanix, and the Founder and Designer of Amaroo Handmade Opal Jewelry, based in Haddonfield, New Jersey. With over 40 years of industry knowledge, he and his team are known for restoring everything from new watches to vintage jewels and being one of the few shops that still design and make jewelry and watches. Jewelry & Timepiece Mechanix is part of the American Society of Jewelers and Gemologists and Ethical Metalsmiths. Bill studied at the Miami Jewelry Institute and the Gemological Institute of America as well as apprenticed with many accomplished craftspeople. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 2,070,803 times.
When you don't have the specialized tools to remove a watch backing, you may not know how to replace a battery or fix a broken watch. But you don't need to buy expensive tools to pry off your watch's backing. In many cases, specific household items will do. Depending on your watch, you may be able to pry off the backing with something as simple as your thumbnail, a razor blade, a rubber ball, or a pair of scissors.
Things You Should Know
- Use your thumbnail to pry the back from a cheap or simply-designed watch. Alternatively, use a razor blade if your thumbnail is too short.[1]
- Press a soft, tacky rubber ball against the back of a screw-back watch and twist counterclockwise to loosen the watch.[2]
- Grab a pair of scissors and work a tip into the watch’s screw notch if it’s attached extremely tightly. Twist counterclockwise to loosen the watch’s screws.[3]
Steps
Method 1 Method 1 of 3:Using Your Thumbnail or a Razor Blade to Remove Simple Backings
-
1 Try your thumbnail on cheap, simplistically-designed watches. Some watch backings can be opened by prying a simple hinge in the back open. Inspect your watch to determine whether the backing will make this possible. If the backing has no screws, it can likely be opened with your thumbnail. - This method will only work if your watch backing has no screws.
- While you may be able to use other fingernails, your thumbnail is usually the largest and strongest.
-
2 Locate your watch's hinge. On simple watches, the hinge will look like a small indentation along the edge of the watch's back. This is where you will place your thumbnail to pry off the backing. - Do not set your watch down as you work. Keep it in your other hand so you can maneuver it while prying it open.
-
3 Insert your thumbnail underneath the backing hinge and lift. As you work, your nail should face the back of the watch. Lift slowly to avoid chipping or bending your thumbnail. With pressure and patience, the backing should pop off. If the backing does not easily come off, avoid using your thumbnail so you don't damage it.[4] - This method is best done if you have long, healthy fingernails.
-
4 Use a razor blade as an alternative.[5] If the hinge is tight or your thumbnail is too short to pry off the backing, a flat razor blade can work as well. Place the razor blade's edge in through the hinge opening and lift until it is pried off. - If there is no indentation but a space between the back and casing, you can use this method with a razor blade.
- Small kitchen knives can work in a pinch if you don't have a razor blade.
Advertisement
Using a Rubber Ball on a Screw-Back Watch
-
1 Purchase a soft, mashable rubber ball. Rubber balls often have enough grip to pry off watch backings.[6] Choose a rubberized ball that is both squishy and tacky so it can latch onto your watch's back. - Stress balls can work as a cheaper alternative.
- Avoid rubber balls made from hard materials. The ball needs to be soft and pliable so it can grip the backing.
- A super-cheap alternative is to reverse-wrap a new tennis ball with duct tape until completely covered. The duct tape adhesive is very sticky and the tennis ball gives you something to grip onto.
-
2 Place the watch down on a flat surface. Although you can hold the watch in your hand while you work, placing it on a flat surface will allow you to work more comfortably and efficiently. If your watch is expensive or fragile, set a towel down for the watch to rest on while you work. -
3 Press the ball firmly into the watch's backing. The rubber ball will need to press itself firmly against the backing, particularly the screw notches. Apply firm pressure as you move the ball against the backing so the ball can establish a strong grip. - Apply pressure to the watch in increments to avoid accidentally damaging your watch.
-
4 Twist the ball counterclockwise. Most watch models will loosen when turned counterclockwise and tighten when turned in the opposite direction. As you turn the watch, the backing's screws should loosen. Twist quickly and firmly to keep the rubber ball's grip firm on the backing. -
5 Use the ball to loosen, but not remove, the backing. Once the backing is loose enough, you can use your fingers to remove it entirely. Twist the backing with your fingers in the same counterclockwise movement until it and the screws come off. Keep the backing and screws in a safe place so you do not lose them.[7] -
6 Use the rubber ball again to put the backing on afterward. You'll want to make sure to secure the backing on tightly once you have done whatever you needed to while removing it. Place the cover on your watch's back and press the rubber ball firmly against it. Turn swiftly in a clockwise motion to tighten the backing up again.[8] Advertisement
Unscrewing Your Watch Backing with Scissors
-
1 Use scissors to loosen extremely tight backings.[9] Rubber balls may not provide enough grip if your backing is screwed on tightly enough. Scissor tips are usually small enough to reach your watch's screws and twist them off as a specialized screwdriver would. - Choose a pair of scissors with blunt tips to avoid injuring yourself if they slip.
-
2 Put the watch down on a firm, flat surface. Placing the watch on a flat surface will allow you to work safely while handling the scissors. If your watch is expensive or fragile, set a soft towel down for the watch to rest on while you take out the screws. -
3 Locate the watch's screw notches. These notches mark the locations of your screws. Open the handle of the scissors, then put one scissor tip into a screw notch as you prepare to unscrew it. Make sure you place the scissor end firmly inside the notch to avoid losing your grip as you turn it.[10] -
4 Twist the notches in a counterclockwise movement. Just as you would with the rubber ball method, turn the scissors in a counterclockwise movement to loosen each screw. Once you've removed your first screw, repeat this method on the remaining notches.[11] - When you're ready to put the backing on again, you will use the same method but twist in a clockwise movement.
-
5 Try using a precision screwdriver as an alternative. If you can't get the hang of or would prefer not to use scissors, purchase a precision screwdriver from your local hardware store. Precision screwdrivers are usually small enough to unscrew watch backings without having to purchase specialized tools. Advertisement
Expert Q&A
Search Add New Question- Question Are there any other ways to remove watch back covers without proper tools?
Bill Green Jewelry & Watch Expert Bill Green is an Expert Jeweler and Appraiser. He is also the Founder & Creative Director of Jewelry & Timepiece Mechanix, and the Founder and Designer of Amaroo Handmade Opal Jewelry, based in Haddonfield, New Jersey. With over 40 years of industry knowledge, he and his team are known for restoring everything from new watches to vintage jewels and being one of the few shops that still design and make jewelry and watches. Jewelry & Timepiece Mechanix is part of the American Society of Jewelers and Gemologists and Ethical Metalsmiths. Bill studied at the Miami Jewelry Institute and the Gemological Institute of America as well as apprenticed with many accomplished craftspeople.
Bill Green Jewelry & Watch Expert Expert Answer I highly advise consulting a local watchmaker or jeweler for assistance. While it's possible to remove the back cover yourself, there's a risk of causing damage to the watch or breaking the gasket seals. This could result in costly repairs or scratches to the case. Seeking professional help ensures the job is done correctly and avoids potential mistakes. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 18 Helpful 13 - Question How do I replace the backing cover of my watch? I pried it off with a thin bladed knife but it won't pop back together easily.
Community Answer Try laying it upside down on a table and pushing down on the back evenly with a piece of wood. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 41 Helpful 61 - Question How do I remove the back if there is no tab?
Community Answer Some watches have screw-on case backs, which can usually be identified by notches cut into the case back or a coin-like edge. In this case, the proper tools are needed. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 83 Helpful 90
Video
Tips
- Be careful when handling sharp knives or screwdrivers to avoid hurting yourself. Thanks Helpful 6 Not Helpful 2
- If you've tried each method and you still can't get the backing open, visit a local jeweler to determine what your best option is. Thanks Helpful 4 Not Helpful 1
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below. - If your watch is old, valuable, or sentimental, definitely take it to a watch repair shop or jeweler to make sure you don't damage it!
- Command strips or other adhesives also work instead of the rubber ball or scissors.
Things You'll Need
- Blunt scissors
- Rubberized ball
- Duct tape and tennis ball
- Razor blade (optional)
- Precision screwdriver (optional)
- Towel (optional)
You Might Also Like
Expert Interview
Thanks for reading our article! If you’d like to learn more about watch repair, check out our in-depth interview with Bill Green.
References
- ↑ Bill Green. Jewelry & Watch Expert. Expert Interview
- ↑ Bill Green. Jewelry & Watch Expert. Expert Interview
- ↑ Bill Green. Jewelry & Watch Expert. Expert Interview
- ↑ http://www.barrygoldberg.net/watchguide/open.htm
- ↑ Bill Green. Jewelry & Watch Expert. Expert Interview
- ↑ Bill Green. Jewelry & Watch Expert. Expert Interview
- ↑ https://www.youtube.com/watch?v=sXZYzjOHhKU&feature=youtu.be&t=206
- ↑ https://www.youtube.com/watch?v=sXZYzjOHhKU&feature=youtu.be&t=264
- ↑ Bill Green. Jewelry & Watch Expert. Expert Interview
- ↑ https://www.youtube.com/watch?v=BpGG7td_NaM&feature=youtu.be&t=61
- ↑ https://www.youtube.com/watch?v=BpGG7td_NaM&feature=youtu.be&t=61
About This Article
If you need to pry off a watch backing but don’t have the proper tools, start by turning your watch over and locating the small indentation along the edge, which is the hinge. Next, insert the edge of a razor blade or kitchen knife into the hinge opening, working slowly so you don’t damage the watch. Then, lift the razor blade like a lever and apply even pressure to pry off the backing. For tips on how to pry off a particularly tight watch backing using a pair of scissors, read on! Did this summary help you?YesNo
In other languages Spanish German Portuguese Russian Italian French Thai Indonesian Chinese Arabic Japanese Hindi Dutch Turkish Czech- Send fan mail to authors
Reader Success Stories
-
Rebecca Shaw
Jun 21, 2017
"I used a small kitchen knife and followed the instructions given above and the back popped right off. I pulled the stem and wiggled the knife, lengthwise, directly under the edge of the back and it popped right open. Thank you for the instructions."..." more
Did this article help you?
Yes No
Advertisement Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Rebecca Shaw
Jun 21, 2017
"I used a small kitchen knife and followed the instructions given above and the back popped right off. I pulled the stem and wiggled the knife, lengthwise, directly under the edge of the back and it popped right open. Thank you for the instructions."..." moreCheryl Jolley
Jul 31, 2017
"I had numerous watches around the house but could not for the life me figure out how to open them! Thank you; you're a lifesaver! Or a timesaver at least!"..." moreBruce Cavallin
May 3, 2017
"I bought this old house, totally furnished including a stopped Timex watch. Popped the back cover, replaced the battery and wallah, it works. "..." more Rated this article:D. Rhodus
Nov 26, 2017
"I couldn't get my watch back off! Didn't think of using something with a sharp edge until I read this. Worked like a charm! Thanks!"..." more Rated this article:R. Duff
Jun 10, 2017
"The entire article was most helpful. I appreciate those who took their time to pass along understandable instructions for amateurs."..." more Share yours! More success stories Hide success storiesQuizzes & Games
You Might Also Like
Featured Articles
Trending Articles
Featured Articles
Featured Articles
Watch Articles
Trending Articles
Quizzes & Games
- Categories
- Personal Care and Style
- Jewelry
- Watches
- Home
- About wikiHow
- Experts
- Jobs
- Contact Us
- Site Map
- Terms of Use
- Privacy Policy
- Do Not Sell or Share My Info
- Not Selling Info
- Contribute
Follow Us
×Get all the best how-tos!
Sign up for wikiHow's weekly email newsletter
Subscribe You're all set! X --Tag » How To Open Back Of Watch
-
How To Open A Watch Back Multiple Types - YouTube
-
How To Open A Snap Off Watch Back - YouTube
-
How To Open A Watch With Common Household Items Without Pro ...
-
How To Open A Watch Back: Easy Do It Yourself Methods
-
How To Open A Screw-Back Watch Case - Gear Patrol
-
How To Open A Watch Back - Esslinger Watchmaker Supplies Blog
-
How To Open A Snap Off Case Back
-
How Do You Remove A Watch Back Without Proper Tools? - Quora
-
How To Remove A Watch Back To Replace The Battery
-
Quick TIP On How To Open And Close Snap Off Watch Back Cover ...
-
Open A Watch Case Or Back - Allan Hall's Astrophotography
-
How To Remove The Stuck Back Of A Watch - Vintage Watch Advisors
-
Top 10 Best Watch Case Back Opener Tools [How To Open Watch ...
-
Top 6 Most Affordable Exhibition Display Back Watches