3 Ways To Remove Duct Tape Residue - WikiHow
Maybe your like
- Log in / Sign up
This article was co-authored by Michelle Driscoll, MPH and by wikiHow staff writer, Mason Martinez, BA. Michelle Driscoll is a professional cleaner based in Fort Collins, Colorado. With over 7 years of experience, Michelle is the founder of Mulberry Maids, specializing in cleaning homes and small offices. Mulberry Maids services Northern Colorado, including Fort Collins and Loveland, and offers a variety of services, including commercial cleaning, move-in and move-out cleaning, and regular home cleaning. Michelle holds a Master's in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau. There are 10 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 324,366 times.
Duct tape is a powerful adhesive that can leave behind a strong, sticky residue. Fortunately, you can use plenty of common household tricks and commercial products on metal, plastic, glass, leather, and fabric surfaces. In this guide, we'll teach you how to remove duct tape's unsightly residue and keep your belongings clean.
Quick Tips to Lift Duct Tape Residue
- Before trying chemical cleaners, manually remove as much residue as possible with a butter knife, rubber eraser, fresh duct tape, or a hair dryer.
- For stubborn spots, combine cooking oil or water with baking soda. As an alternative, use commercial cleaners, rubbing alcohol, or sandblasting.
- Use oily cleaning products on non-porous surfaces, and keep abrasive cleaners away from stone surfaces. For fabrics, opt for dye-free detergents or dish soap.
Steps
1Rubbing alcohol
-
Soak a microfiber cloth in rubbing alcohol to rub the adhesive off. Use a soft, clean cloth to avoid damaging the surface you're treating. Dampen the cloth with isopropyl rubbing alcohol and gently rub it back and forth over the affected area. Always test an indiscriminate area before proceeding.[1] - Best for: Non-porous surfaces, like stone, leather, chrome, and carpet.
- Alternatively, use acetone or non-acetone nail polish remover. However, acetone may strip the paint off of metal surfaces.
- As a substitute for rubbing alcohol, use hard, clear liquor like vodka.[2]
Advertisement
Dish soap and warm water
-
Scrub duct tape residue with dish soap and warm water. Place 1 US tbsp (3.0 tsp) of liquid dish detergent in 2 c (16 fl oz) of warm water. Stir until the mixture is bubbly. Then, dip a soft cloth into the soapy water to gently scrub the sticky residue. Keep rubbing the area until it no longer feels slippery or sticky.[3]
- Best for: Any surface.
- If you're removing residue from a light-colored fabric surface, opt for dye-free dish soap to avoid staining the fabric.
Laundry detergent
-
Use a 1:1 ratio of detergent and washing soda. Combine equal parts of laundry detergent and washing soda into a bowl. Add small amounts of water, adding more as needed, to form a paste. Apply with a soft-bristle toothbrush or cloth. Let it soak for 10 minutes before using a damp cloth to remove it.[4]
- Best for: Stone, fabric, metal, vinyl, and more.
- Use warm water and a clean cloth to wipe the surface afterward.
- Washing soda is also known as soda ash or sodium carbonate. It is a natural cleaner and water softener that converts fats and grease into water-soluble salts.[5]
- Make washing soda at home by putting a tray of baking soda in the oven at 400°F (204°C) for 15 minutes.
Advertisement
Cooking oil
-
Cover the residue with cooking oil and wipe the surface after 5 minutes. Use any cooking oil you have on hand—vegetable, canola, olive oil, it doesn't matter! Once it soaks in, rub or scrape the residue with a soft-bristle brush, dull knife, or a gloved finger. Wipe any excess oil off with an all-purpose cleaner.[6]
- Best for: Non-porous surfaces like glass, plastic, or metal.
- Applying oil to absorbent materials such as carpets or clothing may cause stains.
White vinegar
-
Soak a paper towel in white vinegar and lay it over the adhesive. Dab a paper towel or cloth into distilled white vinegar. Lay the paper towel over the residue, then lift it after a few minutes. Rub or scrape the loosened residue.[7]
- Best for: Glass, tile, chrome, and fabric.
- Avoid using vinegar on stone, steel, and iron surfaces.
Advertisement
Baking soda
-
Mix equal parts baking soda and oil to make a paste. If duct tape has left a stubborn mess on your surface, you may need something with a little more grit. Make a paste of equal parts baking soda and cooking oil or water. Let the paste sit for 5 or more minutes before wiping it away.[8] - Best for: Fabric, metal, marble, silver, and plastic.
- Baking soda is ideal for kitchen surfaces since it's non-toxic.
- Avoid using baking soda on aluminum, gold-plated, marble, or antique silver pieces or surfaces since it's abrasive. It may scratch or oxidize certain surfaces.[9]
WD-40
-
Spray WD-40 to treat metal surfaces. Spray the solution directly onto areas with a lot of residue or dampen a terry cloth to treat smaller patches of residue. Leave it on for a minute—longer if the residue is really stubborn—then scrub it off with soap and water to remove the oils.[10] - WD-40 is perfect for car surfaces, too. Some users say it can help remove minor scratches on a car's paint job. Read the warnings on the canister to avoid using it on surfaces that may stain.[11]
- Best for: Metal and painted surfaces.
- As a substitute to WD-40, use Vaseline or car wax.
Advertisement
Lighter fluid
-
Scrub sticky residue with lighter fluid for non-porous surfaces. Apply a small amount of lighter fluid to a paper towel. Lightly scrub the adhesive until it lifts. If there's a blurry residue left, take an alcohol wipe (or rubbing alcohol) to clean the surface.[12]
- Best for: Stainless steel, plastic, and most surfaces.
- Lighter fluid may affect some paint surfaces or certain plastics. Perform a test patch on beforehand.
Hair dryer
-
Heat the residue with a hairdryer for quick removal. Set the hairdryer to the highest setting. Aim a few inches from the surface to avoid scorching or damaging it. Turn it on, and allow the hot hair to loosen the adhesive. Scrape it off carefully with a knife or a similar tool. You may need to repeat this step multiple times.[13] - Best for: Most hard surfaces that can withstand heat.
- Use extra caution for plastic materials that may melt or glass surfaces that can crack due to high heat.
Advertisement
Dull blade
-
Scrape the residue with a butter knife, dull putty knife, or razor. Lay the blade flat against the surface to avoid scratches. Then, slowly slide the blade over the residue and chip away at it. Work in small sections. If needed, wipe the spot clean afterward with soapy water.[14] - Best for: Most surfaces.
Rubber eraser
-
Lift the residue off most surfaces with a gum or rubber eraser. Take an eraser from your stationary supply and work in small sections to erase the residue. Brush the fibers away as you go. It may require a bit of elbow grease, but it'll work![15] - Best for: Plastic, glass, metal, and most other surfaces. However, it may be more difficult to use with fabrics.
Advertisement
Duct tape
-
Use fresh duct tape to lift the old residue off. Have you ever tried to lift a dried Expo marker from a whiteboard using a fresh marker? Some users say the logic works the same when removing old sticky residue! Cut a fresh piece of duct tape. Place it over the residue and rip it off in the opposite direction to lift it. - Best for: Most surfaces.
Commercial cleaners
-
Apply a commercial residue remover for a stronger treatment. There are brands, like Goo-Gone, designed to remove residue from commercial tape. Follow the directions on the back label. Generally, this involves spraying the solution onto the surface, letting it sit, and wiping it away.[16]
- Best for: Most non-fabric surfaces.
Advertisement
Power washing or sandblasting
-
Use high water pressure or sandblasting for exterior surfaces. You may need something strong if you have sticky residue on rock, concrete, or brick surfaces. Aim a high-pressure water system or sandblaster at the adhesive. Briefly turn it on and off until the residue is gone.[17] - Best for: Rock, concrete, brick, and similar exterior surfaces.
- Be very careful when doing this. These machines can leave marks on most surfaces.
Community Q&A
Search Add New Question- Question What gets tape residue off of plastic?
Community Answer Try using some rubbing alcohol first; avoid acetone or nail polish remover, as this may damage some types of plastics. If that doesn't work, try some dish soap or olive oil. After that, use a damp cloth and rubbing alcohol to wipe off any residue. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 5 Helpful 15 - Question How do you get duct tape residue off fabric?
Community Answer Apply some hand sanitizer to the residue, then try to rub it off. Repeat this a few more times until most of the residue is gone. Next, spray some laundry stain remover, wait 5 to 10 minutes, then launder the fabric as usual. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 8 Helpful 10
Video
Read Video TranscriptTips
- First, test any solutions in an inconspicuous spot to avoid damaging the surface. Thanks Helpful 0 Not Helpful 0
Warnings
- Use caution when scraping residue with a blade so you don't scratch or damage the surface. Thanks Helpful 0 Not Helpful 0
You Might Also Like
References
- ↑ https://todayshomeowner.com/cleaning/guides/how-to-remove-duct-tape-residue/
- ↑ https://todayshomeowner.com/cleaning/guides/how-to-remove-duct-tape-residue/
- ↑ https://www.lovetoknow.com/home/cleaning/how-remove-duct-tape-residue-easily
- ↑ https://www.lovetoknow.com/home/cleaning/how-remove-duct-tape-residue-easily
- ↑ https://www.onegoodthingbyjillee.com/11-helpful-uses-for-washing-soda/
- ↑ https://www.bhg.com/homekeeping/house-cleaning/tips/how-to-remove-sticker-residue-281474979530492/
- ↑ https://www.bhg.com/homekeeping/house-cleaning/tips/how-to-remove-sticker-residue-281474979530492/
- ↑ https://www.dotit.com/blog/the-restaurant-safe-way-to-remove-sticky-labels-sticker-residue.html
- ↑ https://cosmoappliances.com/what-you-shouldnt-clean-with-baking-soda/
- ↑ https://www.bhg.com/homekeeping/house-cleaning/tips/how-to-remove-sticker-residue-281474979530492/
- ↑ https://autodetailingpro.ca/can-you-use-wd40-on-car-scratches/
- ↑ https://youtu.be/B2ajkCrEkZQ?t=72
- ↑ https://www.bhg.com/homekeeping/house-cleaning/tips/how-to-remove-sticker-residue-281474979530492/
- ↑ https://www.dotit.com/blog/the-restaurant-safe-way-to-remove-sticky-labels-sticker-residue.html
- ↑ https://www.bhg.com/homekeeping/house-cleaning/tips/how-to-remove-sticker-residue-281474979530492/
- ↑ https://www.epicurious.com/shopping/ive-tried-every-hack-for-removing-sticker-residue-and-this-is-the-only-thing-that-actually-works
- ↑ https://echotape.com/adhesive-tape/ten-simple-solutions-to-remove-tape-residue/
About This Article
To remove duct tape residue, try using the edge of a credit card. Hold the edge parallel to the surface you are working on, and slowly scrape up the tape residue with it. You can also remove duct tape residue using a washcloth and warm water. Just scrub the residue with the damp cloth using circular motions until it comes off. If it won't come off, use rubbing alcohol instead of water. For really stubborn duct tape residue, use a hairdryer on the highest setting to soften the residue so it's easier to rub off. Aim the hairdryer at the residue and move it back and forth for a few minutes. Then wipe the softened residue off with a towel. For tips from our Commercial Cleaner reviewer on how to use baby oil or peanut butter to get rid of duct tape residue, read on! Did this summary help you?YesNo
In other languages French Spanish German Indonesian Russian Chinese Vietnamese Dutch Thai Korean Turkish Japanese- Send fan mail to authors
Did this article help you?
Yes No
Advertisement If you buy through links on our site, we may earn a commission.Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Quizzes & Games
You Might Also Like
Featured Articles
Trending Articles
Featured Articles
Featured Articles
Watch Articles
Trending Articles
Quizzes & Games
- Categories
- Home and Garden
- Housekeeping
- Stain Removal
- Adhesive Stains
- Home
- About wikiHow
- Experts
- Jobs
- Contact Us
- Site Map
- Terms of Use
- Privacy Policy
- Do Not Sell or Share My Info
- Not Selling Info
- Contribute
Follow Us
×Don’t miss out! Sign up for
wikiHow’s newsletter
Subscribe You're all set! X --Tag » How To Remove Duck Tape Residue
-
10 Simple Tips To Remove Adhesive Tape Residue - ECHOtape
-
How To Remove Duct Tape Residue From Any Surface - Bob Vila
-
How To Remove Duct Tape Residue Easily - Cleaning - LoveToKnow
-
How To Remove Duct Tape Residue Fast And Easy - YouTube
-
How To Remove Duct Tape Residue - YouTube
-
11+ Brilliant Ways To Remove Duct Tape Residue - Tips Bulletin
-
How To Remove Duct Tape Adhesive - Tape University®
-
How To Easily Remove Tape Residue - The Spruce
-
How To Remove Duct Tape Residue - Lifehacker
-
How To Remove Duct Tape Residue - USA Today
-
Removing Duct Tape Residue - The Boat Galley
-
Remove Duct Tape Residue - Goo Gone
-
How To Remove Duct Tape Residue (8 Ways To Do It!)
-
How To Remove Sticker Residue From Metal: Simple Solutions - Loctite