7"Arduino Touch Screen Shield W/SSD1963,Library For Mega/Due

Product Update Notice? Date Issued: May 28,2024 Summary: Update ER-TFTM070-4V2.1-4124 to ER-TFTM070-4V3-4124 Reason: ER-TFTM070-4V2.1-4124 's capacitive touchscreen controller IC, FT5206, has been discontinued by the manufacturer, rendering it unavailable for further purchase. To address this, we have implemented an upgrade in the ER-TFTM070-4V3-4124, introducing the new capacitive touchscreen controller IC, FT5316. Additionally, for enhanced usability and convenience, the SD card slot and ZIF connector located on the control board have been relocated from the left to the right side.

Description

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (7" diagonal) bright (14 white-LED backlight) and colorfu 800x480 pixels with individual pixel control. As a bonus, this display has a optional resistive touch panel with controller XPT2046 attached by default.

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic Arduino (Due/Mega 2560). This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.

Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!

For 7 inch screen,the high current is needed.But the current of arduino uno or arduino mega board is low, an external 5V power supply is needed. Refer to the image shows the external power supply position on shield ER-AS-SSD1963.

For people who want the same screen but not in a shield, check out our 7 " TFT breakout.

 

What's included in the package ?

Number	Standard Accessory Name	Quantity
1	7 inch TFT LCD Display with SSD1963 Controller Board	1
2	Arduino Shield	1

*The default power supply is 5V and the default interface is 8080 16-bit parallel interface.

 

Compatible with following Arduino Boards

Board Name	MCU	I/O
Arduino MEGA2560	ATMEGA2560	54
Arduino MEGA1280	ATMEGA1280	54
Arduino Due	AT91SAM3X8EA	54
Arduino Uno	ATMEGA328	14

 

Attention

If you've had a lot of Arduino DUEs go through your hands (or if you are just unlucky), chances are you’ve come across at least one that does not start-up properly.The symptom is simple: you power up the Arduino but it doesn’t appear to “boot”. Your code simply doesn't start running.You might have noticed that resetting the board (by pressing the reset button) causes the board to start-up normally.The fix is simple,here is the solution.

 

Datasheet for Display Module

Format	Documents Name	Language	Update Date	Size
	ER-TFTM070-4V3_Datasheet	English	May-08-2024	1.3M
	Controller IC SSD1963 Datasheet	English	Apr-01-2012	827K

 

Datasheet and Schematic for Arduino Shield

Format	Documents Name	Language	Update Date	Size
	ER-AS-SSD1963 Datasheet	English	Mar-08-2016	767K
	ER-AS-SSD1963 Arduino Schematic Diagram	English	Aug-08-2019	252K

 

Datasheet for Touch Controller

Format	Documents Name	Language	Update Date	Size
	7 inch 4-Wire Touch Panel Datasheet	English	Feb-02-2013	247K
	Resistive Touch Panel Controller XPT2046 Datasheet	English	May-08-2007	579K
	7 inch Capacitive Touch Panel Outline Drawing	English	May-23-2013	353K
	Capacitive Touch Controller FT5316 Datasheet	English	Apr-13-2012	340K

 

Tutorial - Arduino Due (MEGA 2560)Libraries,Examples

Format	Documents Name	Language	Update Date	Size
	7"Resistive/Capacitive Touch Shield+SD Card	English	Aug-21-2017	8.23M