A Guide To Gym Equipment - Freeletics

• Training
• Nutrition
• Lifestyle
• Well-Being
• Community
• Science
• Reading Lists

Products

• Training
• Nutrition

BlogFreeleticsenGet your Coach

• Training
• Nutrition
• Lifestyle
• Well-Being
• Community
• Science
• Reading Lists

Get your Coach

Training

A guide to gym equipmentGet familiar with barbells, benches and weightsSeana7 years ago4 min read

Share article

Gym equipment can seem daunting at first. Especially if you’re new to weight training. What equipment do I need? How do I use it right? What weight should I lift? There are three ways to find out the answers to these questions: 1. Ask the staff at your gym, 2. Ask the person training next to you, or 3. Read this article.

First, let’s introduce you to the list of equipment you will need in order to train with the Freeletics Weight Training Journeys. The good news is that you won’t need much equipment and almost everything can be found in the free weights area.

• Barbells
• Weights
• Power racks with a pull-up bar and dip bar
• Bench
• Weight belt

Barbells

There are different kinds of barbells. Below are the most common ones you will find in almost every gym.

Olympic Weightlifting Bar

The men’s so-called Olympic Weightlifting Bar, used in standard men’s weightlifting competitions, weighs 20kg, or 45lb. While the women’s version weighs 15kg or 33lb. A powerlifting barbell weighs 25kg or 55lb. These bars are suitable for all workouts in your Freeletics app.

Weight: Usually 20kg / 45lb

Most Gyms also provide a shorter and less heavy version of this barbell, especially suitable for women who start training with lighter weights in the beginning.

Weight: Between 7kg and 15kg. Ask staff for the exact weight before you start using this.

SE Bar

This bar can be used for tricep extensions or barbell curls.

Weight: Between 7,5kg and 10kg. Ask staff of your local Gym before you start using this.

Tricep Bar

This bar should not be used for Freeletics workouts.

The so-called standard barbells, ironically, do not come in standard weights; if your gym uses standard weights ask the staff how much the barbells weigh first.

General note: For safety reasons always use the weight stoppers. Sometimes one side of your body can push a bit harder, making the bar become uneven and causing the weights to slide off the end. Be safe and secure the weight with stoppers.

If you cannot find the right barbell, you can also train with plates only.

You might also be interested in:

Training

Is this the most versatile piece of equipment you’...

Ellie6 years ago

Training

Freeletics Training with Equipment: New Gear, New ...

Leonardo5 years ago

Weights

In most gyms you will find the following plates that are necessary to perform Freeletics weights workouts. Olympic plates range from 0.5kg (1.1lb), to 30kg (66lb). Powerlifting plates begin at 0.25kg (0.55lb), and go up to 25kg (55lb). Standard weight plates come in a variety of weights. The weight of the plate – for Olympic, powerlifting and standard weights – will be displayed on the side of the plate in kilograms, pounds or both. To convert kilograms into pounds simply multiply by 2.2.

Please note that the weight suggestions given to you always include the bar.

Figuring out which weight to lift can be a challenge at first. But don’t worry, over time this calculating this will become a routine.

How to calculate the weights

Calculating the weight of your barbell and weights is a matter of basic arithmetic. The total weight includes the weight of the barbell and the weight of the plates. That is, if the suggested weight in the app is e.g. 50kg, you first have to deduct the weight of the barbell (e.g. 20kg, you can ask the staff if you’re not sure about the weight of the barbell) and then split the remaining weight (i.e. 30kg in this case) up into two parts to get the weight of each plate (i.e. 15kg per plate, the weight of the plate is written on the plate).

Power Racks

There are three kinds of racks typically found in gyms that can be used with Freeletics Gym app. Ideally, the rack includes a dip and a pull-up bar attachment. If you set the bar up to perform back squats or front squats it should be positioned at the midpoint between the top and the bottom of your sternum.

Note: The main function of a rack is safety. For this reason, you should always use the safety bars. Adjust them, so they are just a bit below the bar during your deepest squat position.

Bench

For certain exercises, you will require a bench.

Weight belt

If your gym does not have a dedicated weight belt it may instead have a chain with a karabiner. If this is also not available, just position the weight (plate or dumbbell) you need between your legs and squeeze your legs together to hold it in place.

The Freeletics workouts that include weights, require minimal and basic equipment. Why? We want you to have the freedom to train anytime and anywhere. No excuses. You can find out more about the Freeletics Weight Training methods, contrast training and hypertrophy on the blog.

Tags

appstrength training

Written by

Seana

Article is also available in

deesfritptHungry for more?

Get the latest training, nutrition, and product news and tips in the Freeletics newsletter.

Get our newsletter

When you subscribe to our newsletter, you will receive tailored emails and awesome content from Freeletics products, services, and special offers. You may opt out of the newsletter at any time by following the unsubscribe link in any email we send you. Learn about this and how we handle your data in our Privacy Policy.