Arcan HJ3000A Quick Start Manual 3 ton aluminum-steel hybrid jack Hide thumbs 1 2 3 4 5 6
pageof6 Go /6
Contents
Table of Contents
Troubleshooting
Bookmarks
Table of Contents
1Operation
2Troubleshooting
3Regular Maintenance
4Specifications
Download this manual
WARNING INFORMATION This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS. It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsiblity of the device owner to keep this manual intact and in a convenient location for all to see and read. Contact Arcan® Professional Tools for a replacement label if your jack's label is not readable. THE NATURE OF HAZARDOUS SITUATIONS WARNING The use of Portable Automotive Lifting Devices are subject to certain hazards that cannot be prevented by mechanical means, but only by the exercise of intelligence, care, and common sense. It is essential to have personnel involved in the use and operation of the device who are careful, competent, trained, and qualified in the safe operation of the device and its proper use when servicing motor vehicles and their components. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading, off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not intended. METHODS TO AVOID HAZARDOUS SITUATIONS WARNING • Read, study, understand and follow all instructions before operating this device. • Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid, or unstable due to loose or missing components. Make corrections before using. • Lift only on areas of the vehicle as specified by the vehicle manufacturer. • Wear eye protection that meets ANSI Z87.1 and OSHA standards (Users & Bystanders). • Do not use jack beyond its rated capacity. Do not shock load. • This is a lifting device only. Immediately after lifting, support the vehicle with jack stands capable of sustaining the load before working on the vehicle. • Use only on a hard level surface free from obstructions so the jack is free to reposition itself during lifting and lowering operations. • Center load on saddle. Be sure setup is stable before working on vehicle. • Do not move or dolly the vehicle while on the jack. • Do not use any materials that may serve as risers, spacers or extenders between the stock lifting saddle and the load. • Do not use any adaptors that replace the stock lifting saddle unless approved or supplied by the jack manufacturer. • Do not use (or modify) the product for any other purpose than that for which it was designed without consulting the manufacturer's authorized representative. • Always lower the jack slowly and carefully. • Failure to heed these warnings may result in fatal personal injury and/or property damage. WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS WARNING Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS could cause accidents resulting in serious or fatal personal injury and/or property damage. HJ3000A 3 Ton Aluminum-Steel Hybrid Jack For Technical Questions, Call: 1-800-879-7316 WARNING 1 Model HJ3000A WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury. 09/12/19 Table of Contents Previous Page Next Page
1
2
3
4
5
Table of Contents
Need help?
Do you have a question about the HJ3000A and is the answer not in the manual?
Ask a question
Questions and answers
Related Manuals for Arcan HJ3000A
Jacks Arcan HJ1800AU Quick Start Manual 1,800 kg aluminum-steel hybrid jack (6 pages)
Jacks Arcan HJ3000 Manual 3 ton aluminum-steel hybrid jack (17 pages)
Jacks Arcan XL35R Owner's Manual Professional low profile jack (10 pages)
Jacks Arcan XL35 Operation Manual Professional low lift jack (16 pages)
Jacks Arcan XL20 Operating Instructions Manual 2 ton low lift service jack (6 pages)
Jacks Arcan ALJ2T Manual 2 ton aluminum service jack (12 pages)
Jacks Arcan XL2500 Manual 5,000 lb professional steel floor jack (22 pages)
Jacks Arcan BLACKLINE ALJ3TB Manual 3 ton aluminum service jack (7 pages)
Jacks Arcan XL2T Operating Instructions Manual 2 ton extra long and low clearance service jack (6 pages)
Jacks Arcan BLACKLINE XL35B Manual 3.5 ton professional low lift service jack (6 pages)
Jacks Arcan Blackline XL2TB Instructions Manual Extra long and low clearance service jack (6 pages)
Jacks Arcan BLACKLINE SAJ35TB Quick Start Manual 3.5 ton hybrid aluminum/steel service jack (7 pages)
Jacks Arcan XL3000 Manual 3 ton professional steel floor jack (22 pages)
Jacks Arcan BLACKLINE ALJ2TB Quick Start Manual 2 ton aluminum service jack (6 pages)
Jacks Arcan XL3000A Quick Start Manual 3 ton professional steel floor jack (6 pages)
Summary of Contents for Arcan HJ3000A
Page 1 It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsiblity of the device owner to keep this manual intact and in a convenient location for all to see and read. Contact Arcan® Professional Tools for a replacement label if your jack's label is not readable.
Page 2 CAUTION: In order to prevent seal damage and jack failure, never use alcohol, hydraulic brake fluid, or transmission oil in the jack. Use hydraulic jack oil, a light turbine oil, Chevron Hydraulic Oil AW ISO 32 or Unocal Unax AW 150. IMPORTANT: Before attempting to raise any vehicle, check vehicle service manual for recommended lifting surfaces. HJ3000A 09/12/19...
Page 3: Operation
5. Handle tends to raise up while the unit is under rated load. Pump the handle rapidly several times to push oil past ball valves in power unit. 6. Unit still does not operate. Contact customer service (page 6). HJ3000A 09/12/19...
Page 4: Regular Maintenance
Model HJ3000A 3 Ton Aluminum-Steel Hybrid Jack For Technical Questions, Call: 1-800-879-7316 HYDRAULIC MAINTENANCE GUIDE IMPORTANT: Service jacks are designed for lifting purposes only; always support raised load with jack stands. REGULAR MAINTENANCE MONTHLY or as necessary (depending on usage) #1 Lubricate all linkages and pivot points.
BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. Arcan® Professional Tools will repair or replace its Arcan® Professional Tools branded products which fail to give satisfactory service due to defective workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.
Table of Contents
Print
Print page 1 Print document (6 pages)
Rename the bookmark
Cancel
Delete bookmark?
Cancel Delete
Delete from my manuals?
Cancel Delete
Login
Sign InOR Sign in with Facebook Sign in with Google Don't have an account? Sign up! Restore password
Upload manual
Upload from diskUpload from URL Thank you for your help!