Arduino Nano USB Not Recognizing (Fix). - Instructables

Maybe your like

Introduction: Arduino Nano USB Not Recognizing (Fix).

By Maggie ShahFollowMore by the author:

Desk Bluetooth Speaker With Audio Visualisation, Touch Buttons and NFC.

Arduino Nano USB Not Recognizing (Fix).

Step 1: Arduino Nano Clones

Unfortunately an original Arduino Nano could cost you more plus shipping so it makes sense to search for an alternative source. There are also some chinese clones that are around five times cheaper, even with worldwide shipping.But wait! There’s always a reason why a clone of something is cheaper than the original product. In this case there can be two pitfalls you need to know about.

Step 2: Original FTDI for Data Communication

Sometimes the FTDI chip which makes the USB communication possible is a counterfeit. This could cause problems when you install the official FTDI drivers and they just refuse to work.Usually there is no bootloader on the microcontroller. You need to upload it yourself and that means you need to have an appropriate programmer on hand.

Step 3: The Bad Part About Cheap Chinese Clones

So what makes this clone cheaper than the others? Well, most probably two things:

1.The headers are not installed.

2.It uses a different chip (CH340G) for serial-USB communication than the others.

The different serial chip on the other hand was something I was a little bit worried about but I’ve found my fears to be baseless. When I connected the board to the computer with a miniUSB cable it was instantly recognised by Windows as a virtual serial port.