Art Clay Gold Paste

　 　 　 　 　 　 　 　 　　 Art Clay Gold Paste 　

• 

Paste Type

It comes in a viscous liquid form with medium bottle. You can add texture or draw directly on the surface of fired Art Clay Silver, ceramic, porcelain and/or glass.

K24 Gold ratio before firing: 77.5%

Gold purity after firing: K22

Firing schedules : See below for details.

Available package: Gold Paste: 1.5 gram / Medium bottle: 5ml. *Medium bottle is used to dilute Art Clay Gold Paste for a lighter gold color on fired Art Clay Silver surfaces, ceramics, porcelain and glass.

Material form : Paste in a glass bottle.

Characteristics

• Art Clay Gold Paste is in a viscous liquid form, so that you can texture to the surface and draw on a surface of Art Clay Silver (fired piece), ceramic, porcelain and/or glass.
• 77.5% of indicated weight is 24K gold, and it becomes 22K gold after firing.
• This product is water based and can dry up, so always keep the container tightly capped. If it is dries up, add an appropriate amount of water to recover its original state.
• If you need to build the Gold layers more than 0.5mm in thickness, fire the piece first, and then build another layer on top of the fired gold area. Repeat until reaching your desired thickness.
• The surface of the fired area where Gold Paste was applied will be matte in color due to crystallization, but a luster can be obtained by polishing.
• Do not polish gold overlaid area on the glazed surface too hard, as it may chip off with the glazed surface. Polishing the area with light gliding stroke is enough bring out the shine. If the Gold area chips off during polishing, it is possible to attach it with Art Clay Silver Overlay Silver Paste*. *Requires second firing to attach.

How to dilute Art Clay Gold Paste

To dilute the paste, take out the necessary amount and place in in a separate container. Then, add necessary amount of water or medim depending on your desired finished gold color. *Recommended ratio for diluting the Gold Paste with the medium is 3 (Gold Paste) : 1 (Medium).

Preparation

Clean the surface of the porcelain , glass or ceramic with a alcohol, or soap and water to remove dust or oil. They may disturb Gold Paste attaching on the surface. *Prepare a paintbrush specifically for use of the Gold Paint.

Overlaying

FOR PAINTING ON CERAMIC, PORCELAIN OR GLASS SURFACE It is recommended to have diluted Gold Paste with the medium.

FOR PAINTING ON A FIRED ART CLAY SILVER SURFACE Use undiluted paste and apply the Gold Paste on a matte surface. If you would like to apply Gold Paste on a polished silver surface, fire the silver piece in a kiln for 30 minutes at 700℃/1292°F to make a matte surface first and then apply. **Thickness of the application needs to be less than 0.5mm thick per layer. If you use undiluted paste on a glass or thick glazed porcelain surface, the painted area may sink due to gold weight.

Firing

• It is important that you kiln's pyrometer is functioning properly.
• Gas torch firing is not recommended for this product.
• For stove top firing, plesae use gas-operated stove, which is able to generate more than 2.9kw (2900 calories), and recommended stainless steel net.

Option1: Application on fired Art Clay Silver surface

Kiln firing

1. Raise kiln temperature to 500℃/932°F.
2. Place the piece in the kiln and fire to 800℃/1472°F.
3. After reaching the temperature, hold for 5 minutes to complete the firing. Turn the kiln off and allow to cool.

Stove top firing

1. Place the stainless steel net on the burners of a gas stove. Make sure the stainless steel net is placed at center of the burners. Turn on the cooking stove. Identify the most red-hot spots on the stainless steel net.
2. Turn off the cooking stove. Place the piece on the spot where you identified the most red-hot part using a pair of tweezers.
3. Turn on the cooking stove again and fire the piece for five minutes. Turn off the stove and do not touch for at least 20 minutes. *Maximum Dimensions: 5.0cm(L) x 3.0cm(W) x 2.0cm(H)

Option2: Application on a porcelain or ceramic surface.

Kiln firing

1. Place the piece in a cold kiln and fire to 800℃/1472°F.
2. Turn off your kiln when the temperature reaches 800℃/1472°F. There is no hold time.
3. You may remove the piece when the temperature reaches 100℃/212°F, or cool naturally to room temperature.

Option3: Application on a glass* surface

This firing is for glass COE 90. Please do test fire if you use different COE glass.

Kiln firing

1. Place the piece in a cold kiln and fire to 800℃/1472°F.
2. When the temperature reaches 800℃/1472°F, hold for 5 minutes.
3. Open the kiln door and cool down (crash-cool) to 600℃/1112°F, and close the kiln door again*.
4. Allow the kiln to reach room temperature before removing. *The glass used with the Gold Paste is COE90 and if you use different types of glass, please do test fire first.

Warning & Caution

• Ventilate your workroom well during firing.
• When drying and baking, take care not to get burned or start a fire.
• Keep this product out of the reach of children.
• If you get any of this product in your eyes or mouth, flush immediately with plenty of water and call your physician.
• Avoid contact with your skin. If skin irritation or itching occurs, wash with water and consult your doctor immediately.
• Do not place a ceramic or porcelain piece that has the Overlay Silver Paste applied into a microwave oven.
• Keep this product indoors out of direct sunlight.
• Do NOT keep in a refrigerator.
• Use it soon after opening.

Check other types of Art Clay Products