Aruba AP-305 Data Sheet

How it Works Log In / Sign Up

• Buy Points
• How it Works
• FAQ
• Contact Us
• Questions and Suggestions
• Users

Aruba Loading... #

• 65
• 200
• 203H
• 320
• 360
• 501
• 620
• 2530
• 2540
• 2930M
• 2E
• 3000
• 5406R
• 5412R
• 7005
• 7008
• 7010
• 7024
• 70302
• 7280

A

• Activate
• Airwave 8.2.10.12
• Airwave 8.2.4
• Airwave 8.2.4.1
• Airwave 8.2.9
• Airwave 8.2.X
• AP-103
• AP-105
• AP116
• AP-115
• AP11D5
• AP125
• AP-120
• AP-121
• AP-124
• AP-125
• AP155
• AP174
• AP-203H
• AP-203R
• AP-205
• AP-205H
• AP-207
• AP-214
• AP224
• AP-2202
• AP-303
• AP-303H
• AP-305
• AP-315
• AP-318 FIPS-TAA
• AP-325
• AP-335
• AP-345 FIPS-TAA
• AP-365
• AP-375EX
• AP-377 FIPS-TAA
• AP-503H
• AP-505
• AP-515
• AP-518
• AP-555
• AP-565
• AP-577
• AP-AC-12V30B
• AP-ANT-19

E

• EnOcean

I

• IAP-103
• IAP-114
• IAP-115
• IAP-204
• IAP-205
• IAP-205H3
• IAP-214
• IAP-215
• IAP-2242
• IAP-225
• IAP-2282
• IAP-2742
• IAP-275
• IAP-277
• IAP-315
• IAP-324
• Instant On
• Instant On 1830
• Instant On AP22

J

• J9576A
• J9729A
• J9776A
• JL253A
• JL254A
• JL255A

Loading... Loading... Nothing found AP-305 Data sheet6 pgs156.9 Kb1 Table of contents Loading... Aruba AP-305 Data sheet ... Aruba Data sheet Download

Specifications and Main Features

Frequently Asked Questions

User Manual

Download Page 1 DATA SHEET ARUBA 300 SERIES ACCESS POINTS Entry-level 802.11ac Wave 2 Access Points The entry-level Aruba 300 Series Wave 2 access points deliver high performance and superb user experience for medium density environments. Featuring 3x3:3SS MU-MIMO capability, Aruba advanced ClientMatch radio management, and integrated Aruba Beacons, the 300 Series enables an all wireless digital work environment in a cost- eective manner. With a maximum concurrent data rate of 1,300 Mbps in the 5GHz band and 400 Mbps in the 2.4GHz band (for an aggregate peak data rate of 1.7Gbps), the entry-level 300 Series brings an always-on wireless network experience with the performance required for enterprises. It is ideal for cost- sensitive medium density environments across verticals. The high performance 802.11ac 300 Series supports multi- user MIMO (MU-MIMO) and 3 spatial streams (3SS). It provides simultaneous data transmission to multiple devices (up to two), maximizing data throughput and improving network eciency. The 300 Series includes the enhanced ClientMatch technology that extends the client steering technology with MU-MIMO client awareness. It automatically identies MU-MIMO capable mobile devices and steers those devices to the closest MU-MIMO capable Aruba access point. By grouping MU-MIMO capable mobile devices together, the network starts taking advantage of the simultaneous transmission to these devices, increasing its overall capacity. These dynamic roaming policies that are based on device types, help customers achieve the best WLAN performance in a mixed device environment during the technology transition period. The 300 Series also has an integrated Bluetooth Aruba Beacon that simplies the remote management of a network of large- scale battery-powered Aruba Beacons while also providing advanced location and indoor waynding, and proximity-based push notication capabilities. It enables businesses to leverage mobility context to develop applications that will deliver an enhanced user experience and increase the value of the wireless network for organizations. UNIQUE BENEFITS • Dual Radio 802.11ac Access Point with Multi-User MIMO  - Supports up to 1,300 Mbps in the 5GHz band (with 3SS/VHT80 clients) and up to 400 Mbps in the 2.4GHz band (with 2SS/VHT40 clients). • Built-in Bluetooth Low-Energy (BLE) radio  - Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.  - Enables management of your deployment of battery- powered Aruba Beacons. • Advanced Cellular Coexistence (ACC)  - Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment. Quality of service for unied communication apps. • Quality of service for Unied Communication apps  - Supports priority handling and policy enforcement for unied communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing. • RF Management  - Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs. Page 2 DATA SHEET ARUBA 300 SERIES ACCESS POINTS  - The Aruba 300 Series APs can be congured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available. • Intelligent app visibility and control  - AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 2,500 enterprise apps or groups of apps. • Security  - Integrated wireless intrusion protection oers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.  - IP reputation and security services identify, classify, and block malicious les, URLs and IPs, providing comprehensive protection against advanced online threats.  - Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys. • Intelligent Power Monitoring (IPM):  - Enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities.  - For the 300 Series APs, the IPM power-save feature applies when the unit is powered by an 802.3af PoE source. By default, the USB interface will be the rst feature to turn o if AP power consumption exceeds the available power budget. In rare cases it may be necessary to take additional power saving measures, but in most cases, the 300 Series APs will operate in unrestricted mode. CHOOSE YOUR OPERATING MODE Aruba 300 Series APs oer a choice of operating modes to meet your unique management and deployment requirements. • Controller-managed mode – When managed by Aruba Mobility Controllers, Aruba 300 Series APs oer centralized conguration, data encryption, policy enforcement and network services, as well as distributed and centralized trac forwarding. • Aruba Instant mode – In Aruba Instant mode, a single AP automatically distributes the network conguration to other Instant APs in the WLAN. Simply power-up one Instant AP, congure it over the air, and plug in the other APs – the entire process takes about ve minutes. If WLAN requirements change, a built-in migration path allows 300 Series Instant APs to become part of a WLAN that is managed by a Mobility Controller. • Remote AP (RAP) for branch deployments. • Air monitor (AM) for wireless IDS, rogue detection and containment. • Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference. • Secure enterprise mesh. For large installations across multiple sites, the Aruba Activate service signicantly reduces deployment time by automating device provisioning, rmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory- shipped to any site and congure themselves when powered up. AP-300 SERIES SPECIFICATIONS • AP-304 (controller-managed) and IAP-304 (Instant):  - 802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a total of three dual-band RP-SMA connectors for external antennas • AP-305 (controller-managed) and IAP-305 (Instant):  - 802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a total of three integrated omni-directional downtilt dual- band antennas WI-FI RADIO SPECIFICATIONS • AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO • Software-congurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1) • 5GHz: Three spatial stream Single User (SU) MIMO for up to 1,300 Mbps wireless data rate to individual 3x3 VHT80 client devices • 5GHz: Two spatial stream Multi User (MU) MIMO for up to 867 Mbps wireless data rate to up to two (1x1 VHT80) MU-MIMO capable client devices simultaneously • 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400 Mbps wireless data rate to individual 2x2 VHT40 client devices (300 Mbps for HT40 802.11n client devices) • Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio • Supported frequency bands (country-specic restrictions apply):  - 2.400 to 2.4835GHz  - 5.150 to 5.250GHz  - 5.250 to 5.350GHz  - 5.470 to 5.725GHz  - 5.725 to 5.850GHz Page 3 DATA SHEET ARUBA 300 SERIES ACCESS POINTS • Available channels: Dependent on congured regulatory domain • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum • Supported radio technologies:  - 802.11b: Direct-sequence spread-spectrum (DSSS)  - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) • Supported modulation types:  - 802.11b: BPSK, QPSK, CCK  - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM • Transmit power: Congurable in increments of 0.5 dBm • Maximum (conducted) transmit power (limited by local regulatory requirements):  - 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)  - 5GHz band: +18 dBm per chain, +23 dBm aggregate (3x3)  - Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks • Maximum ratio combining (MRC) for improved receiver performance • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance • Short guard interval for 20MHz, 40MHz and 80MHz channels • Space-time block coding (STBC) for increased range and improved reception • Low-density parity check (LDPC) for high-eciency error correction and increased throughput • Transmit beam-forming (TxBF) for increased signal reliability and range • Supported data rates (Mbps):  - 802.11b: 1, 2, 5.5, 11  - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54  - 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)  - 802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23)  - 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3 for VHT20/40/80 • 802.11n high-throughput (HT) support: HT 20/40 • 802.11ac very high throughput (VHT) support: VHT 20/40/80 • 802.11n/ac packet aggregation: A-MPDU, A-MSDU WI-FI ANTENNAS • AP-304/IAP-304: Three RP-SMA connectors for external dual band antennas. Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz. • AP-305/IAP-305: Three integrated dual-band downtilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.  - The maximum gain of the combined (summed) antenna patterns for all elements operating in the same band is 5.4dBi in 2.4GHz and 7.6dBi in 5GHz. OTHER INTERFACES • One 10/100/1000BASE-T Ethernet network interface (RJ-45)  - Auto-sensing link speed and MDI/MDX  - 802.3az Energy Ecient Ethernet (EEE) • USB 2.0 host interface (Type A connector) • Bluetooth Low Energy (BLE) radio  - Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity  - Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi (AP-305/IAP-305) • Visual indicators (multi-color LEDs): for System and Radio status • Reset button: factory reset (during device power up) • Serial console interface (proprietary; optional adapter cable available) • Kensington security slot POWER SOURCES AND CONSUMPTION • The AP supports direct DC power and Power over Ethernet (PoE) • When both power sources are available, DC power takes priority over PoE • Power sources are sold separately • Direct DC source: 12Vdc nominal, +/- 5%  - Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source  - Unrestricted functionality with 802.3at PoE Page 4 DATA SHEET ARUBA 300 SERIES ACCESS POINTS  - When using IPM, the AP may enter power-save mode with reduced functionality when powered by an 802.3af PoE source (see details on Intelligent Power Monitoring elsewhere in this datasheet)  - Without IPM, the USB port is disabled when the AP is powered by an 802.3af PoE source • Maximum (worst-case) power consumption: 13W (PoE) or 11W (DC)  - Excludes power consumed by external USB device (and internal overhead); this could add up to 6.5W (PoE) or 5.5W (DC) for a 5W/1A USB device • Maximum (worst-case) power consumption in idle mode: 3.7W (PoE) or 2.6W (DC) MOUNTING • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch at T-bar drop-tile ceiling • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details MECHANICAL • Dimensions/weight (unit, excluding mount accessories):  - 165mm x 165mm x 38mm  - 460g • Dimensions/weight (shipping):  - 205mm x 205mm x 52mm  - 620g RELIABILITY MTBF: 1,116,000hrs (127yrs) at +25C operating temperature REGULATORY MODEL NUMBERS • AP-304 and IAP-304: APIN0304 • AP-305 and IAP-305: APIN0305 CERTIFICATIONS • CB Scheme Safety, cTUVus • UL2043 plenum rating • Wi-Fi Alliance (WFA) certied 802.11a/b/g/n/ac WARRANTY • Aruba limited lifetime warranty MINIMUM OPERATING SYSTEM SOFTWARE VERSIONS • ArubaOS 6.5.1.0, 8.1.0.0 • Aruba InstantOS 4.3.1.0 ENVIRONMENTAL • Operating:  - Temperature: 0° C to +50° C (+32° F to +122° F)  - Humidity: 5% to 93% non-condensing • Storage and transportation:  - Temperature: -40° C to +70° C (-40° F to +158° F) REGULATORY • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1, EN60601-1-2 For more country-specic regulatory information and approvals, please see your Aruba representative. Page 5 RF PERFORMANCE TABLE DATA SHEET ARUBA 300 SERIES ACCESS POINTS Maximum transmit power (dBm) per transmit chain 802.11b 2.4GHz 1 Mbps18.0-95.0 11 Mbps18.0-88.0 802.11g 2.4GHz 6 Mbps18.0 54 Mbps18.0-74.0 802.11n HT20 2.4GHz MCS0/8 MCS7/15 802.11n HT40 2.4GHz MCS0/818.0-88.0 MCS7/1518.0 802.11a 5GHz 6 Mbps18.0-92.0 54 Mbps18.0-74.0 802.11n HT20 5GHz MCS0/8/1618.0-91.0 MCS7/15/2318.0-71.0 802.11n HT40 5GHz MCS0/8/1618.0-88.0 MCS7/15/2317.0-68.0 802.11ac VHT20 5GHz (SU-MIMO) MCS018.0-91.0 MCS818.0-67.0 802.11ac VHT40 5GHz (SU-MIMO) MCS018.0-88.0 MCS917.0-63.0 802.11ac VHT80 5GHz (SU-MIMO) MCS018.0-85.0 MCS917.0-58.0 18.0-91.0 18.0-71.0 Receiver sensitivity (dBm) per receive chain -92.0 -68.0 Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings. Page 6 DATA SHEET ARUBA 300 SERIES ACCESS POINTS ORDERING INFORMATION Part NumberDescription 300 Series Access Points AP-304Aruba AP-304 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio Antenna Connectors AP AP-305Aruba AP-305 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio Integrated Antenna AP AP-304-F1Aruba AP-304 FIPS/TAA-compliant 802.11n/ac Dual 2x2:2/3x3:3 MU-MIMO Dual Radio Antenna Connectors AP AP-305-F1Aruba AP-305 FIPS/TAA-compliant 802.11n/ac Dual 2x2:2/3x3:3 MU-MIMO Dual Radio Integrated Antenna AP Mounting Spares AP-220-MNT-C1Indoor Access Point suspended ceiling rail mount kit (for at rails only, black). Spare for the clips provided with the AP. Mounting Accessories AP-220-MNT-C2Indoor Access Point suspended ceiling rail mount kit (for Interlude and Silhouette rail styles only, black). Alternate to standard clips provided with AP. AP-MNT-CM1Indoor Access Point suspended ceiling rail mount kit (industrial grade, metal). Fits most rail types AP-220-MNT-W1Indoor Access Point at-surface mount kit (basic, black) AP-220-MNT-W1WIndoor Access Point at-surface mount kit (basic, white). Mechanically identical to AP-220-MNT-W1 AP-220-MNT-W3Indoor Access Point at surface mount kit (box style, secure, low-prole, large). Color: white Other Accessories AP-305-CVR-20Kit of 20 snap-on covers for AP-305. Plain white, non-glossy, with holes for LED indicators. Color: white Generic Indoor AP Accessories AP-AC-12V30B12V/30W AC-to-DC Desktop Style Power Adapter with Type B DC plug (2.1/5.5/9.5mm circular, 90-degree angled). Note: does not include country specic AC power cord (PC-AC-xx). PD-3501G-AC15.4W 802.3af PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country specic AC power cord (PC-AC-xx) PD-9001GR-AC30W 802.3at PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country specic AC power cord (PC-AC-xx) AntennasSee info on Aruba website for antenna part numbers AP-CBL SERSerial adapter cable for AP console port (proprietary header to DB9 female) 1344 CROSSMAN AVE | SUNNYVALE, CA 94089 1.844.473.2782 | T: 1.408.227.4500 | FAX: 1.408.227.4550 | [email protected] www.arubanetworks.com DS_AP300Series_092716 Loading... + hidden pagesUnhide You need points to download manuals. 1 point = 1 manual. You can buy points or you can get point for every manual you upload. Buy points Upload your manuals Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use