Atag A200S Installation & Servicing Instructions Manual [Page 40]

× Bookmark added × Added to my manuals

1. Manuals
2. Brands
3. Atag Manuals
4. Boiler
5. A200S
6. Installation & servicing instructions manual

Error Message - Atag A200S Installation & Servicing Instructions Manual Hide thumbs Also See for A200S:

• Installation & servicing instructions manual (44 pages)
,
• User manual (40 pages)
,
• User manual (14 pages)

1 2 Table Of Contents 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

• page of 48 Go / 48
• Contents
• Table of Contents
• FAQs
• Bookmarks

Table of Contents 14

Error message

Example of display of error message 40 A detected failure is indicated on the display in blocking or error messages. - Blocking code with spanner symbol Error is temporary and will cancel itself or will lock the boiler after several attempts (error) - Error code with bell symbol Error means a lock on the boiler and can only be remedied by a reset and/or intervention by a service technician. C 10 Outside sensor error (e.g. open, short circuit, outside of range) C 20 Flow sensor error (e.g. open, short circuit, outside of range) C 40 Return sensor error (e.g. open, short circuit, outside of range) C 50 Wiring fault: Connector X7 not connected correctly. Low voltage wiring harnass defect C 78 Water pressure outside of range or not connected or if water pressure is OK: Pump failure C1 05 Venting program active C1 10 Safety temperature exceeded C1 11 Maximum temperature exceeded C1 17 Pressure too high (> 3 bar) or pump pressure increase too high C1 18 Pressure too low (< 0.7 bar) or pump pressure increase too low (no pump detection) C1 19 Link on X2 position 4 and 5 missing C1 29 Fan error (fan does not start up) C1 33 no flame after 5 ignition attempts C1 51 fan error (speed control is not achieved or is outside of range) C1 52 Para 555 b0 is changed from 0 to 1 instead of b2. Change back through green button function (installer level Para 681 b7) C1 54 flow increases to fast ∆T to large, return > supply C1 56 Pump failure C1 80 No error: shortly visible when leaving chimney sweep function C1 81 No error: shortly visible when leaving commissioning mode Table of Contents Previous Page Next Page

• 1
• ...
• 37
• 38
• 39
• 40
• 41
• 42
• 43
• 44

Show Quick Links

• Quick Links:
• Introduction
• Controls and Explanation of the Functions
• Checking the O
• Maintenance Activities
• Error Message
• Annexe A Technical Specifications

Hide quick links:

Permanently Temporary Cancel Table of Contents

Need help?

Do you have a question about the A200S and is the answer not in the manual?

Ask a question Go to Questions and Answers

Related Manuals for Atag A200S

• Boiler Atag A200S Installation & Servicing Instructions Manual Central heating boilers (44 pages)
• Boiler Atag A-Series User Manual (40 pages)
• Boiler Atag A325EC User Manual (14 pages)
• Boiler Atag A200SOV Instructions For Use And Installation Open vent heat only boiler (40 pages)
• Boiler Atag A200SOV User Manual (12 pages)
• Boiler Atag Q 25S Instructions Manual (48 pages)
• Boiler Atag Q 25S Operating Instructions Manual Shr (16 pages)
• Boiler Atag Q 25S Installation & Servicing Instructions Manual (44 pages)

• Boiler Atag E 22S Installation And Servicing Instructions (40 pages)
• Boiler Atag Premier E-SHR 15 Installation And Servicing Instructions (32 pages)
• Boiler Atag IC series User Manual (16 pages)
• Boiler Atag i24C Technical Manual Service engineer edition (64 pages)
• Boiler Atag iR 12 Installation & Servicing Instructions Manual Open vent system (56 pages)
• Boiler Atag XL75W Installation & Servicing Instructions Manual (108 pages)
• Boiler Atag Q 25S Installation & Servicing Instructions Manual (52 pages)
• Boiler Atag IS 12 Installation & Servicing Instructions Manual (64 pages)

Related Content for Atag A200S

i24C View Error Code History Atag i24C

XL75W View Error Code History Atag XL75W

XL75F View Error Code History Atag XL75F

XL140 Error Report Atag XL140

QR Series Error, Maintenance And Warranty Atag QR Series

Blauwe Engel S-HR Series Error Indication Atag Blauwe Engel S-HR Series

iC 24 Error Codes And Fault Fi Nding Atag iC 24

i28C Error Codes And Fault Finding Atag i28C

This manual is also suitable for:

A320sA325cA203cA325ecx

Table of Contents

Print

Print page 40 Print document (48 pages)

Rename the bookmark

Cancel

Delete bookmark?

Cancel Delete

Delete from my manuals?

Cancel Delete

Login

Sign In OR Sign in with Facebook Sign in with Google Don't have an account? Sign up! Restore password

Upload manual

Upload from disk Upload from URL Thank you for your help!