Basic Operations And Embroidery Functions [Video Instructions]

• Home
• Others
• SE600
• FAQs & Troubleshooting
• Getting Ready
• How to use (Video FAQs)
• faqh00100757_001

SE600

FAQs & Troubleshooting

• Contact Us
• Product Registration

• Date: 04/18/2024
• ID: faqh00100757_001

• Print
• E-mail

Basic operations and embroidery functions [Video instructions]

Video instructions for Basic operations on getting ready, Sewing basics and Embroidery function.

Click on the image to play the video instructions.

* The movies are being streamed from YouTube. (Opening new window.)

1. Basic Operation

[1-01] Winding and setting the lower thread
	Let's take a look at how to wind the bobbin and set the lower thread. Only use the plastic bobbin that comes with this machine or bobbins of the same type.

[1-02] Upper threading
	Let's take a look at how to pass the upper thread into the machine and thread the needle. Make sure to raise the needle using the needle position button before upper threading.

[1-03] Basic sewing
	Let's start sewing to use the straight stitch. In the latter part of the movie, it shows you how to use the presser foot locking pin (black button on the left side) of zigzag foot "J".

[1-04] Reverse sewing
	Let's try reverse sewing. In the latter part of the movie, it shows you how to sew using the automatic reverse/reinforcement stitching function.

[1-05] Adjusting the stitch length and width
	Let's take a look at how to adjust the stitch length and width. (The adjustment screen of the stitch width and stitch length varies depending on the language.)

[1-06] Adjusting the thread tension
	Let's check the thread tension. Before starting your sewing project, we recommend sewing trial stitches using thread and a piece of fabric that are the same as those used for your project. While checking the sewing results, adjust the thread tension.

[1-07] Replacing the presser foot
	Let's take a look at how to replacing the presser foot. Use the appropriate presser foot for the type of stitch that you wish to sew. For details on the presser foot that should be used with the selected stitch, refer to "Stitch Chart" on the operational manual. Use the embroidery foot when doing embroidery.

2. Embroidery Function

[2-01] Embroidering
	Let's take a look at the basic steps for embroidering. Use the embroidery foot when doing embroidery.

[2-02] Various editing operations on the display panel for embroidery
	Let's try selecting embroidery pattern or fonts, and performing various editing function for embroidery.

3. Maintenance

[3-01] Replacing the needle and maintenance
	Let’s take a look at how to change the needle and maintenance.

You can see other instructional videos for this model. Click the banner or link below to watch other videos.

Various sewing and application

Related FAQs

• Various sewing and application [Video instructions]

If your question was not answered, have you checked other FAQs?

• Go to the Top page in the FAQs & Troubleshooting section
• See other FAQs in this category

Have you checked the manuals?

• Go to the Manuals section

If you need further assistance, please contact Brother customer service:

• Go to the Contact Us section

Related Models

LB5000, LB6950, LB7000, SE600, SE625, SE630

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

• Very helpful
• Helpful
• Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.Please do not enter contact information or any other personal information here. (We will not respond to any Feedback you send us.)

Submit

Getting ReadySewing (Utility Stitches)Sewing (Character Decorative Stitches)EmbroideringOperationAccessoriesMaintenanceOne Point AdviceGeneral InformationSewing (Utility Stitches)Sewing (Character Decorative Stitches)EmbroideringPreparationOperationError messagesMaintenanceGeneral ProblemOthersInstructional videos

Upper ThreadingBobbin (Winding/Installing)ThreadingPresser footNeedle/Thread/FabricBefore EmbroideringHow to use (Video FAQs)Others Needle/Thread/FabricTips for sewingFoot controllerHow to use (Video FAQs) PatternsNeedle/Thread/FabricTips for sewing Embroidery patternsEmbroidery dataPresser footNeedle/ThreadFabric/StabilizerEmbroidery frameTips for embroideringHow to use (Video FAQs) Basic OperationEditingMemory functionMachine's SettingsHow to use (Video FAQs)Others AccessoriesHow to use (Video FAQs) CleaningOilingMaintenance messageHow to care and maintenance (Video FAQs) One Point Advice General Information Problems during sewingSewing resultFoot controller Problems during sewingSewing result Problems during embroideringEmbroidering result Bobbin (Winding/Installing)Others Machine's SettingsOthers Error Message on Machine's Display Maintenance General Problem Others Getting Ready (Video)Operation (Video)Sewing (Video)Embroidering (Video)Optional feet (Video)General sewing accessories (Video)Care and Maintenance (Video)

Support & Downloads

SE600

Not your product?

• Downloads
• FAQs & Troubleshooting
• Manuals
• Consumables & Options

Other countries(English)

Change Countries or Regions (Language)

• Site Map
• Legal
• Privacy Policy
• Global Site
• View Mobile Version