BOSTICK STAPLER / SIMPLE FIX - Instructables

Home » How To Fix A Stapler » BOSTICK STAPLER / SIMPLE FIX - Instructables

Maybe your like

Introduction: BOSTICK STAPLER / SIMPLE FIX

graydog111By graydog111Follow More by the author: OIL FILTER WRENCHSTAINLESS STEEL HAND RAIL FOR $0.00Modifying Stainless Steel iPhone Belt Case About: Retired Firefighter 1966 to 1986; Retired Wheat Farmer 1987 to 2003. Drapery Sales 1969 to 1987. 21 year Quintuple Heart Bypass Surgery Survivor; 18 year Melanoma Cancer Survivor. 86 years young. More About graydog111 »

I have two of these Stanley / Bostick model B440 staplers and they both started working erratically. Even though I had plenty of standard staples, i bought some Bostick standard staples because it says so on the bottom of them. That's not necessary.

The problem was each time I used the stapler once, it would not work the next time I used it. Here is what I found and how I made it work every time.

Step 1: OPEN STAPLER

Open stapler as you would to add staples.

Step 2: THE FIX

You will see a long spring there which serves double duty:

1). It pushes the staples to the front of the stapler.

2). It pulls down on a pivot that pushes up on the handle to allow it to feed the next staple into position to be used.

If this spring is old and weak, like mine, it needs more spring tension. The easiest way to do that is to add a full clip of staples (or as many as it will hold). This stretches out the spring, increasing tension, pulling harder on the little pivot, and pushes the handle away from the part holding the clip of staples. Then the darn thing works as it should, or you can go out and buy a new stapler. Just remember that to buy a $20.00 stapler, you must make about $30.00 so you will have the $20 left after you give the IRS $10.00 taxes.

Hide

Tag » How To Fix A Stapler