Build Your Own Foosball Table - Instructables

Introduction: Build Your Own Foosball Table

Several months ago I was build custom ,,Corexy" 3D printer. Sister told me that she want Foosball table. So this inspired me to create 3d printed parts for Foosball table. So it will be cheaper than buy new from store. With all parts it cost to me 120Eur. It is not professional Foosball table, it just for fun playing with friends.

Step 1:

Step 2: The Tools

You will need following tools to build your Foosball table :Electrical tools:

• Table circular saw or portable circular saw
• Jigsaw electric drill or cordless screwdriver
• Eccentric sander or orbital sander.

• Plunge router cutter

Other tools

• Rubber hammer or pinch roller
• Hand sander with sandpaper in different granulation
• Spanner and screwdriver
• Clamp hook

Step 3: List of Materials

Material required for the body and legs:Body

The body consists of natural wood. The sides are made of 28mm board.

Required quantities :

65cm x 12cm x 2.8cm (Pole side )

118cm x 12cm x 2.8cm (Goal side)

Playfield

The playfield is made of one HPL board of 9 mm thickness.

Required quantities :

118cm x 63cm x 0.9mm

HPL, High Pressure Laminate

Legs

The legs is used from chrome table legs

Required quantities :

4x 60cm

Bolts, Nuts, Screw

26 x M5x35 bolts

26 x M5 nuts

200 x woodscrew 2.9x19

20 x woodscrew 2.9x9

30 x woodscrew 3x30

Bracket

8x bracket 90 degree

Step 4: 3d Printed Parts

M5 x 35mm - Foosball table Man Player

Screw 2.9x9mm - Foosball Rod Lid End Cap

Screw 2.9x9mm - Foosball_Handle_Grip

Screw 2.9x16mm - Foosball Rod Bearings

Screw 2.9x16mm - Foosball gate inside

Screw 2.9x16mm - Foosball gate outside

Screw 2.9x16mm - Foosball serving hole

Attachments

• Foosball_gate_inside.stlDownloadView in 3D
• Foosball_Rod_Bearings.stlDownloadView in 3D
• Foosball_Rod_Lid_End_Cap_.stlDownloadView in 3D
• Foosball_serving-hole.stlDownloadView in 3D
• Foosball_Table__Man_Player.stlDownloadView in 3D
• Foosbal_gate_outside.stlDownloadView in 3D
• Foosball_Handle_Grip_.stlDownloadView in 3D

Step 5: 3D Printed Foosball Table Accessories

8 rods with a diameter of 16 mm, hollow or solid We need : 2x 87cm, 4x 95cm, 2x105cm

1. 13 players in 2 colors that will fit the 16mm rods, and screws.
2. 16 bushings with a profile of 28 mm diameter
3. 8 grips fitting the 16mm rods
4. 16 small rubber buffers or springs
5. 36mm ball

Step 6: The Sides

Rod hole diameter - 28mm

Foosball serving hole diameter - 50mm

Step 7: Wood Lacquer

After 2 wood lacquer layers sand with 400 and 1000 grit. After that polished with paste.

Step 8: The Playfield

Add green vinyl wrap for playfield with white stripes. I was used the wet application method.

Step 9: The Legs

Playfield board is thick (9mm) Mine solution add additional 30mm MDF board.

Step 10: The Gates

For gates I was used mosquito net for windows.

Step 11: The Assembly and Final Result

Step 12: Foosball Scoreboard

more info >>> Foosball scoreboard