Built-In Entertainment Center - Rogue Engineer

HomeDIY Furniture PlansLivingBookcasesBuilt-In Entertainment Center DIY Built In Entertainment Center Plans Rogue Engineer 1

This basement living room has been something we’ve wanted to tackle for a year or so now. We finally bit the bullet and started planning out our built in entertainment center. With an 85in TV and such a large wall I knew right away that this entertainment center was going to be massive. After measuring out the space and coming up with a plan we settled on a 15 foot long unit with lower cabinets and bookcases surrounding the TV. This will end up being the perfect place to store blankets, toys and board games. Time to go get lots of plywood!

DIY Built In Entertainment Center Plans Rogue Engineer 2

Time to Complete

2 Weeks

Estimated Cost

$1000+

Skill Level

Advanced

Printable PDF

Download

If you love this stuff as much as we do, you might want to consider following us on Instagram where we post sneak peeks and behind the scenes stuff in our stories. Also, did you know you can get tons of projects plans from all around the web when you follow us on Facebook and Pinterest!

Tools

  • Pocket Hole Jig
  • Cabinet Door Hardware Jig
  • Drawer Slide Jig
  • Door Handle Jig
  • Drill/Driver
  • Table Saw
  • Miter Saw
  • Circular Saw/Kreg Track Saw
  • Brad Nailer
  • Narrow Crown Stapler (Opt)
  • Tape Measure
  • Pencil
  • Safety Glasses
  • Hearing Protection

Materials

  • (5) 3/4” x 4 x 8 Pre-Finished Plywood
  • (5) 3/4” x 4 x 8 Paint Grade Plywood
  • (6) 2 x 4 x 8’ Lumber (or three 16’)
  • (4) 22” Drawer Slides
  • Edge Banding
  • 3” Wood Screws
  • 1-1/4” Brad Nails
  • 1-1/4” Pocket Screws
  • 2-1/2” Pocket Screws
  • 1-1/4” Trim Head Screws
  • Wood Glue
  • DAP Extreme Stretch Sealant
  • DAP Premium Wood Filler
  • Cabinet Doors/Drawer Fronts/End Panel(s)
  • Door/Drawer Hardware

Disclosure: The links provided in the “materials” and “required tools” sections are affiliate links. If you would like to support our site and help keep our content free come find out more about how we can make money with no extra cost to you.

Kreg Banner 2

Dimensions

DIY Built In Media Center Plans Dimensions

How to Build a Large Built-In Entertainment Center

Time needed: 10 days

  1. Cut List

    Note that some of these pieces will need to be cut to fit in a later step. This should be used as a guide for how to layout your cuts.DIY Built In Media Center Plans Cut List 1DIY Built In Media Center Plans Cut List 2

  2. Assembling the Cabinet Carcasses

    DIY Built In Media Center Plans Step 1

  3. Assembling the Drawer Boxes

    DIY Built In Media Center Plans Step 2Click here for the full tutorial on how to build a simple drawer box.

  4. Assembling the Platform

    DIY Built In Media Center Plans Step 3

  5. Installing the Cabinets

    DIY Built In Media Center Plans Step 4

  6. Installing the Top

    DIY Built In Media Center Plans Step 5

  7. Assembling the Bookshelves

    DIY Built In Media Center Plans Step 6

  8. Installing the Face Frames

    DIY Built In Media Center Plans Step 7

  9. Installing the Bookcases

    DIY Built In Media Center Plans Step 8

  10. Installing the Shelf Over the TV

    DIY Built In Media Center Plans Step 9

  11. Adding Trim to the Unit

    DIY Built In Media Center Plans Step 10

  12. Prepping for Finish

    Making sure that a project like this turns out as good as it can, and continues to look that way for years to come, really comes down to prepping the surfaces for paint. We started by sanding all the surfaces up to 220 grit for a smooth finish. Then, we applied DAP Extreme Stretch Sealant to seal the back of the unit and the trim into the wall. This is great because it can fill gaps up to 3 inches wide (using backer rod when joint depth exceeds 1/2″) and it can stretch up to 600% which is perfect making sure that the seasonal wood movement doesn’t end up cracking the caulk lines. DIY Built In Entertainment Center Plans Finishing 2We also used DAP Premium Wood Filler for any wood joints and nail holes. This product won’t shrink or crack and is great for filling even the wood grain that might show up on a painted surface.DIY Built In Entertainment Center Plans Finishing 3banner ad 2

  13. Priming & Painting

    With all the wood joints and caulking, we deciding to paint this unit in place which will make sure we have great coverage. To do so we taped and shielded the walls, floor and ceiling before spraying the entire unit and wall behind it with primer and paint. For the paint we settled on Natural Cream in color and Benjamin Moore’s Advance interior paint which will provide a more durable finish. DIY Built In Entertainment Center Plans Finishing 5

  14. Installing the Drawer Boxes

    DIY Built In Media Center Plans Step 11

  15. Installing the Cabinet Doors/Side Panels

    DIY Built In Media Center Plans Step 12Related Tutorials:Installing Concealed Cabinet Door HingesMaking Cabinet Doors with a Router TableMaking Cabinet End PanelsPainting and Installing Cabinet DoorsMaking a Cabinet Door Drying Rack

Hopefully these plans helped you have the confidence to tackle a project like this. If you have any questions or input please comment below. Make sure to show off your builds in the comments as well for others to enjoy!

DIY Built In Entertainment Center Plans PIN ME

About The Author

Jamison Rantz
More From This Author

I'm a Christian, father, husband and former aerospace engineer. In my spare time I like to engineer furniture for the weekend DIY'er like myself. In other words, I write plans for awesome looking furniture that are so easy it will blow your mind! (No woodworking experience required.)

Related Posts

DIY X-Base Herringbone Table - Free Plans - Rogue Engineer More Storage Room Makeover Rogue Engineer 4 More Wedding Wine Box | Free Plans More More
  • Popular
  • Recent
Loading Comments... Write a Comment... Email (Required) Name (Required) Website

Tag » How To Build An Entertainment Center