Cleaning After Use | How To Videos | CrossWave® Pet Pro - BISSELL

Skip Navigation Home | Videos | CrossWave® / CrossWave® Pet Pro | How to Clean & Maintain Search Support Search by Keyword Search CrossWave® / CrossWave® Pet Pro | How to Clean & Maintain

Follow along with the video or complete the steps below to clean your CrossWave® Pet Pro - Please follow steps in order

Run Cleaning Cycle

• Place machine on storage tray
• Pour water into the rinse funnel, filling up to the max line
• Turn on your machine by pressing the Hard Floor button
• Recline your machine backwards while in the storage tray. Let the machine run for 10 to 15 seconds until all the water is picked up
• Unplug the cord from the outlet
• If any moisture is left over in the tray from cleaning, wipe it dry with a paper towel or cloth

Clean Brush Roll & Foot

• Remove the brush roll window by grabbing the front and pulling up
• Pull out the brush roll by grabbing the tab and pulling up
• Put the brush roll upright onto the Brush Roll Drying Tray to let it dry
• To reinsert the brush roll, please reference our Cleaning Brush Roll video
• Then lock the pull tab into place by pressing downward
• Reinsert the brush roll window by lining up the tabs with the edges of the foot
• Push the brush roll window back into place until you hear a click

Wash Dirty Water Tank

• To remove, grab the handle in front of the dirty water tank and press down on the release button
• Grasp the top of the tank and pull up to remove it
• Now pull out the strainer, place the debris in a waste basket, and rinse under running water
• Empty the dirty water into a sink, then rinse your tank

Cleaning Filter

• Remove the filter from the top of the tank by pulling up
• Hand wash the filter and screen using warm water
• Then rinse the float, located on the bottom of the dirty water bin’s top
• If the inside area where the dirty water tank sits is dirty, wipe it clean with a rag or towel

Reassembly

• Leave the parts out to dry before reassembling
• Once dry, place the vacuum filter back into dirty water tank top
• Then place the strainer in the dirty water tank
• Now, replace the top of the dirty water tank
• To place the tank back on the machine, insert the bottom first at an angle and push it into place until you hear a click

Tell us how we're doing

Answer 6 short questions to help us improve our Support experience. Take the survey M-j6ctriNlU Great! We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.

• Recipient Email * Your Email * Your Name *

Was this answer helpful?

Yes No

Related Content

• Assembly and First Use | How to Videos | CrossWave® Pet Pro
• Easy Clean Storage Tray | How to Videos | CrossWave®
• Cleaning Brush Roll & Brush Chamber | How to Videos | CrossWave®
• Cleaning & Replacing Brush | How to Videos | CrossWave® Cordless Max
• Cleaning Hard Floors | How to Videos | CrossWave® Pet Pro
• Cleaning Dirty Tank | How to Videos | CrossWave® Cordless
• CrossWave® / CrossWave® Pet Pro | Cleaning & Emptying the Dirty Water Tank
• CrossWave® / CrossWave® Pet Pro | Brush Not Turning
• JetScrub™ Pet | How to Clean & Maintain
• CrossWave X7 Cleaning the dirty water tank | Support

Can't find what you're looking for?

I Need More Help

Give us feedback in a 6-question survey

Take Survey Model Number Including your model number in your email assists our agents in helping you faster. Not sure where to look?

On machines it’s on a white label like this. It’s usually on the lower back or bottom of the machine (for Lift-Off® models, remove the Lift-Off pod to find label) or behind the cleaning tanks.

On cleaning formulasthe model number is actually called an item number. Look for it on the back of the bottle or can, near the bottom.