CLICKER KLIK2C USER MANUAL Pdf Download - ManualsLib

× Bookmark added × Added to my manuals

1. Manuals
2. Brands
3. Clicker Manuals
4. Garage Door Opener
5. klik2c
6. User manual

Clicker klik2c User Manual Universal garage door opener wireless keyless entry Hide thumbs 1 2

• page of 2 Go / 2
• Contents
• Table of Contents
• Bookmarks

Advertisement

Available languages

• EN
• FR

Available languages

• ENGLISH, page 1
• FRANÇAIS, page 2

Table of Contents

• 1 Determine Garage Door Opener Types
• 2 Programming
• 3 Mount the Keypad
• 4 Battery
• 5 Changing Your 4-Digit Pin
• 6 Product Registration and Troubleshooting
• 7 Programmation
• 8 Fixer le Clavier
• Download this manual

CLICKER ® Universal Garage Door Opener Wireless Keyless Entry Thank you for your purchase of a Clicker PLEASE DO NOT RETURN TO THE RETAIL STORE. If for any reason you have STOP questions or need help with troubleshooting please call: 1-800-442-1255. Read instructions thoroughly BEFORE beginning. Start with garage door closed. Determine garage door opener type - Smart/Learn button or DIP Switch. The Smart/ Learn button or DIP Switches are located on motor unit or external receiver. Refer to owner's manual if necessary. Clicker products are intended to be used only with garage door openers manufactured after 1993 that utilize photo-eyes safety sensors. These are always located on or near the bottom of the door track. If your garage door does not have the sensors attached and working, the opener is not compliant with current federal safety regulations and should be replaced.

Determine Garage Door Opener Types:

Proceed with instructions according to your garage door opener type. NOTE: Your motor unit and/or remote control may look different. TYPE 1 Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic and Do It garage door openers or receivers with: 3 position DIP switches. Opener Remote Control

Programming:

TYPE 1 1. Select and write a 4-digit PIN: __ __ __ __ 2. Determine your opener ID using the list below. ID DIP Switch Type • 11 = 9 DIP switch garage door openers (U.S.) • 12 = 9 DIP switch garage door openers (Canada) • 15 = 8 DIP switch garage door openers • 19 = 7 DIP switch garage door openers (Write opener ID here: __ __) 3. The first DIP switch must be set to the "-" position on your remote and opener. Record your DIP switch sequence for remaining DIP switches. If the DIP switch is in the "+" position place a 1, "0" position place a 2, "-" position place a 3 in the corresponding box in the chart below: NOTE: Leave any unused switch locations blank. DIP Switch 1 2 3 4 5 6 7 8 9 Sequence + 0 - 3 Write your DIP switch sequence below: _________________________ 4. Press * and # keys together until keypad stops flashing. 5. Enter PIN from step 1, press #. 6. Enter ID from step 2, press #. 7. Enter DIP switch sequence from step 3 and press # key. 8. To test and use, wait until lights turn off, enter your PIN and press the 0 key. If opener does not function, repeat programming.

MOUNT THE KEYPAD

Install out of the reach of children at a minimum height of 5 feet (1.5 m). Secure keypad to a smooth surface. Mount the keypad out of the path of the moving garage door, but within sight of it (4" clearance is needed for the cover.) 1. Remove cover. 2. Remove battery cover to expose mounting holes. 3. Remove battery and mount keypad using screws provided. 4. Reassemble.

CHANGING YOUR 4-DIGIT PIN

Enter existing PIN, press *, enter new PIN and press *. To test and use, enter your new PIN and press the 0 key.

PRODUCT REGISTRATION AND TROUBLESHOOTING

www.clickerproducts.com • 1-800-442-1255 Chamberlain, LiftMaster and Moore-O-Matic are Trademarks of Chamberlain Group. Genie and Intellicode are Trademarks of GMI Holdings, Inc. Overhead Door is a Trademark of Overhead Door Corporation. Linear is a Trademark of Linear Corporation. Master Mechanic is a Trademark of TruServ. Sears is a Trademark of Sears & Roebuck. Stanley is a Trademark of The Stanley Works. Wayne Dalton is a trademark of Wayne Dalton Corporation. Do It is a trademark of Do It Best Corporation. 114A3487E MODEL KLIK2C ® universal remote control. TYPE 2 Genie, Linear and Moore-O-Matic garage door openers or receivers with: 2 position DIP switches. Opener ON Remote Control ON TYPE 2 1. Select and write a 4-digit PIN: __ __ __ __ 2. Determine your opener ID using the list below. ID DIP Switch Type • 13 = 12 DIP switch Genie garage door openers • 14 = 10 DIP switch Linear garage door openers • 16 = 10 DIP switch Stanley garage door openers • 17 = 9 DIP switch Genie garage door openers • 18 = 8 DIP switch Linear, Moore-O- Matic garage door openers (Write opener ID here: __ __) 3. Record your DIP switch sequence. If DIP switch is in the "on" or "up" position place a 1, "off" or "down" position place a 2 in the corresponding box in the chart below: NOTE: Leave any unused switch locations blank. DIP Switch 1 2 3 4 5 6 7 8 9 10 11 12 Sequence ON OFF Write your DIP switch sequence below: _________________________ 4. Press * and # keys together until keypad stops flashing. 5. Enter PIN from step 1, press # 6. Enter ID from step 2, press #. 7. Enter DIP switch sequence from step 3 and press # key. 8. To test and use, wait until lights turn off, enter your PIN and press the 0 key. If opener does not function, flip DIP switches, so if a switch is "on" or "up" flip it "off" or "down" in step 3. To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door: • ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls. • Activate gate or door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions to door travel. • ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door. TYPE 3 Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic and Do It garage door openers or receivers with: Yellow, white or grey Smart/Learn buttons. Opener Remote Control TYPE 3 1. Select and write a 4-digit PIN: __ __ __ __ 2. Your opener ID is 11. 3. Record your DIP switch sequence. Set your first DIP switch to "-", your first DIP switch must be set to the "-" position on your remote and opener. If the DIP switch is in the "+" position place a 1, "0" position place a 2, "-" position place a 3 in the corresponding box in the chart below: NOTE: Leave any unused switch locations blank. DIP Switch 1 2 3 4 5 6 Sequence + 0 - 3 Write your DIP switch sequence below: _________________________ 4. Press * and # keys together until keypad stops flashing. 5. Enter PIN from step 1, press #. 6. Enter 11, press #. 7. Enter DIP switch sequence from step 3, press #. 8. Press and release the Smart/Learn button on garage door opener. 9. Enter your 4 digit PIN and press the 0 key. 10. To test and use, wait until light turns off, enter your PIN and press the 0 key. If opener does not function, repeat programming.

BATTERY

To prevent possible SERIOUS INJURY or DEATH: • NEVER allow small children near batteries. • If battery is swallowed, immediately notify doctor. Replace the 9-Volt battery when keypad light becomes dim or does not light up. Slide cover up, remove battery cover, and replace battery. Re-programming may be necessary. NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © 2011, Clicker Corporation All Rights Reserved TYPE 4 Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, Do It, Genie Intellicode**, Overhead Door, Stanley, Wayne Dalton or Linear garage door openers with: Smart/Learn button. Opener **NOTE: Visit www.clickerproducts.com for Genie Intellicode II instructions. TYPE 4 1. Select and write a 4-digit PIN: __ __ __ __ 2. Determine your opener ID using the list below. ID Garage door opener brand and manufacturing dates • 1 = Linear garage door openers manufactured from 1997 to present. • 2 = Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic and Do It garage door openers manufactured from 1997 to 2004 [Orange Button]. • 3 = Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic and Do It 7 8 9 garage door openers manufactured from 2005 to present [Purple Button]. • 4 = Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic and Do It garage door openers manufactured from 1993 to 1996 [Green Button]. • 5 = Genie Intellicode and Overhead Door garage door openers manufactured from 2005 to present (315 MHz). • 6 = Genie Intellicode and Overhead Door, garage door openers manufactured from 1995 to present (390 MHz). • 7 = Stanley garage door openers manufactured in 1998-present. • 8 = Chamberlain, Sears Craftsman, and LiftMaster garage door openers manufactured from 2011 to present [Yellow Button]. • 9 = Wayne Dalton garage door openers manufactured in 1999-present. (Write opener ID here: __) 3. Press * and # keys together until keypad stops flashing. 4. Enter PIN from step 1, press #. 5. Enter ID from step 2, press #. 6. Press and release the Smart/Learn button on garage door opener. 7. Enter your 4 digit PIN and press the 0 key NOTE: For Genie and Overhead Door units, press "0" twice. 8. To test and use, wait until light turns off, enter your PIN and press the 0 key. If opener does not function, repeat programming. Previous Page Next Page

• 1
• 2

Advertisement

Table of Contents

Need help?

Do you have a question about the klik2c and is the answer not in the manual?

Ask a question

Questions and answers

Related Manuals for Clicker klik2c

• Garage Door Opener Clicker KLIK2U User Manual Universal garage door opener wireless keyless entry (2 pages)

• Garage Door Opener Clicker KLIK1C Manual Universal garage door opener remote control (2 pages)

Summary of Contents for Clicker klik2c

• Page 1 Clicker products are intended to be used only with garage door openers manufactured after 1993 that utilize photo-eyes safety sensors. These are always located on or near the bottom of the door track. If your garage door does not have the sensors attached and working, the opener is not compliant with current federal safety regulations and should be replaced.

• Page 2: Programmation

  DIP sont situés sur le moteur ou le récepteur externe. Consulter le guide d’utilisation au besoin. Les produits Clicker sont destinés à une utilisation exclusive sur des systèmes d'ouverture de porte de garage fabriqués après 1993 et qui utilisent des capteurs de sécurité...

This manual is also suitable for:

Kl1k2Kl1k2c

Table of Contents

Print

Print page 1 Print document (2 pages)

Rename the bookmark

Cancel

Delete bookmark?

Cancel Delete

Delete from my manuals?

Cancel Delete

Login

Sign In OR Sign in with Facebook Sign in with Google Don't have an account? Sign up! Restore password

Upload manual

Upload from disk Upload from URL Thank you for your help!