Cotton | Description, History, Production, Uses, Botanical Name ...

Cotton fiber processing

Cotton fibers may be classified roughly into three large groups, based on staple length (average length of the fibers making up a sample or bale of cotton) and appearance. The first group includes the fine, lustrous fibers with staple length ranging from about 2.5 to 6.5 cm (about 1 to 2.5 inches) and includes types of the highest quality—such as Sea Island, Egyptian, and pima cottons. Least plentiful and most difficult to grow, long-staple cottons are costly and are used mainly for fine fabrics, yarns, and hosiery. The second group contains the standard medium-staple cotton, such as American Upland, with staple length from about 1.3 to 3.3 cm (0.5 to 1.3 inches). The third group includes the short-staple, coarse cottons, ranging from about 1 to 2.5 cm (0.5 to 1 inch) in length, used to make carpets and blankets, coarse and inexpensive fabrics, and blends with other fibers.

More From Britannica origins of agriculture: Mechanized equipment for cotton Commercially Important Cotton Species

• Upland cotton (Gossypium hirsutum)
• Extra-long staple cotton (G. barbadense)
• Tree cotton (G. arboreum)
• Levant cotton (G. herbaceum)

Most of the seeds (cottonseed) are separated from the fibers by a mechanical process called ginning. Ginned cotton is shipped in bales to a textile mill for yarn manufacturing. A traditional and still common processing method is ring spinning, by which the mass of cotton may be subjected to opening and cleaning, picking, carding, combing, drawing, roving, and spinning. The cotton bale is opened, and its fibers are raked mechanically to remove foreign matter (e.g., soil and seeds). A picker (picking machine) then wraps the fibers into a lap. A card (carding) machine brushes the loose fibers into rows that are joined as a soft sheet, or web, and forms them into loose untwisted rope known as card sliver. For higher-quality yarn, card sliver is put through a combing machine, which straightens the staple further and removes unwanted short lengths, or noils. In the drawing (drafting) stage, a series of variable-speed rollers attenuates and reduces the sliver to firm uniform strands of usable size. Thinner strands are produced by the roving (slubbing) process, in which the sliver is converted to roving by being pulled and slightly twisted. Finally, the roving is transferred to a spinning frame, where it is drawn further, twisted on a ring spinner, and wound on a bobbin as yarn.

Faster production methods include rotor spinning (a type of open-end spinning), in which fibers are detached from the card sliver and twisted, within a rotor, as they are joined to the end of the yarn. For the production of cotton blends, air-jet spinning may be used; in this high-speed method, air currents wrap loose fibers around a straight sliver core. Blends (composites) are made during yarn processing by joining drawn cotton with other staple fibers, such as polyester or casein.

The procedure for weaving cotton yarn into fabric is similar to that for other fibers. Cotton looms interlace the tense lengthwise yarns, called warp, with crosswise yarns called weft, or filling. Warp yarns often are treated chemically to prevent breaking during weaving.