Default Settings Of The TP-LINK Archer C7

Home » Archer C7 V2 Default Password » Default Settings Of The TP-LINK Archer C7

Maybe your like

  • Home
  • TP-LINK
  • Archer C7

Login data for the user interface

IP address: 192.168.0.1 (or http://tplinklogin.net) Username: admin Password: admin

Preconfigured Wi-Fi settings

SSID: starts with TP-LINK_ Password: on a sticker on the router’s case

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the TP-LINK Archer C7, you have to do the following steps for access:

  1. Turn on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open web browser
  4. Insert IP address or URL into the address bar and confirm with ‘Enter’ button
  5. Enter username and password in the open interface and confirm once more
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the TP-LINK Archer C7 to its default settings, you have to do the following steps:

  1. Switch on router
  2. Press WPS/Reset button and hold for at least 8 seconds
  3. Device is automatically restarted
  4. Router has been reset to factory settings

Execute software reset

With the TP-LINK Archer C7, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.

Tag » Archer C7 V2 Default Password