Depth Of Sewer Pipes And Drainage Pipes - Homeone Forum

AdvancedProsForum ×Sign InLoginJoinJoin Anonymous1,642 postsProfile Invite FriendsFeedbackSettingsSign Out
  • Build
  • Decor
  • Kitchen
  • Bathroom
  • Indoor
  • Outdoor
  • Articles
  • Photos
  • Videos
  • 4 members logged in
  • Advertise Now
HomeProsForumSign In
  • About
  • Join Community
  • Contact
ReplyADLBRICANDARHBTMELPERSYD ForumProsArticlesPhotosVideosSearch within Building A New House only WatchingStarredHistory InboxSent MembersPros #Unanswered #Activehomeone.com.auBuilding ForumBuilding A New HouseDepth of sewer pipes and drainage pipes
Back to Building A New HouseNext topic|Previous topicBrowse ForumsBuilding A New House Depth of sewer pipes and drainage pipesby PoloWatchShare by Polo Nov 06, 2008 Page 1 of 1 2 repliesReplyLikeShareMorePoloPolo6/11/200811:13 pm#1PoloPolo24 Apr 2008292MelbourneSilver Member1Nov 06, 2008 11:13 pmHi, Hope this makes sense. We have a provisional sum for rock removal, and was told that the increase chance of hitting rock depends on how deep the sewer pipes are, meaning how deep the excavator have to dig. Would anyone know the trench depth that plumbers dig to connect your sewer pipes and drainage pipe ( the ones that sticks out on top of your site before they pour the concrete slab) to the main pipes (done by the land developer). Just want to know normally how deep the trenches are. I know that the depth of the main sewer pipes (done by developer) is 1.9m. So how deep do the excavator or plumber dig to connect to the main pipe, do they dig 1.9m? Weird questions but hope someone can help. Thank you for your assistance.ReplyReplyLikeShareMoremudmapmudmap7/11/200810:08 am#2mudmapmudmap24 Aug 2008128MelbourneSenior MemberRe: Depth of sewer pipes and drainage pipes2Nov 07, 2008 10:08 amThe depth of the sewer depends on a few things but basically on a flat block you start at the furtherest sewer fitting (toilet etc.) drop 450mm below the slab and grade at 1 in 60 towards the connection to the main. If you block falls towards the sewer main I would say your trench excavation would be approx 1.0m - 1.2m. If the block falls away from the main or the distance will be longer than say 35m you'll use the full 1.9m depth. Hope this helps. Your soil test should have given an indication to the depth of any consistant underlying rock. If they want to claim extra for hitting rock tell them to include a photo in the claim.ReplyReplyLikeShareMorePoloPolo8/11/200812:23 am#3PoloPolo24 Apr 2008292MelbourneSilver MemberRe: Depth of sewer pipes and drainage pipes3Nov 08, 2008 12:23 amhi Mudmap, I appreciate your reply and thank you. My land frontage is 14m and length is 30m. The easement is 2m at rear and the land has about 400mm fall from back of land to front (sloping to front). Soil test is not done because land developer is currently developing the land, so don't know about the continuity of rocks in ground. Looking at the trench of the main sewer pipe that the developer did I can see rock at about 1.7m on one section and rock at 1.9m where the sewer pipe is laid ( I measured the depth). My house cover about just over 50% of land. In your opinion do you think that they need to dig to a depth of 1.9m for the trench?? I believe if they don't dig past 1.5m i could be safe from rocks ( just guessimate) Thanks Mudmap.ReplySign in or Join to reply to this TopicEnd
Sign in or Join to reply to this Topic
Page 1 of 1 ⋅ 3 posts
Member
I understand and agree to the TERMS OF USE and agree that this post satisfies these rules.
RelatedRelatedBuilding A New HouseEng. B A22/02/20251Can I reduce the depth of the I Beam Post undergrand if I shortern the gap for retaining wallCan I reduce the depth of the I Beam Post undergrand if I shortern the gap for retaining wall

General Discussion

Maybe this helps https://www.woodsolutions.com.au/design ... ning-walls

sparta618150851Eng. B AFeb 22, 2025 8:09 pmWatchKristinaB26/03/20250Drain & sewer pipe brokenDrain & sewer pipe broken

General Discussion

Hello I am looking for some general advice and…

KristinaB044662KristinaBMar 26, 2025 11:44 amWatchJK0118/05/20259Build over sewer in BCCBuild over sewer in BCC

Building A New House

M

JK01923600JK01May 18, 2025 11:07 pmWatchBimbob6/06/20251Could my downpipes be going into the sewer system?Could my downpipes be going into the sewer system?

General Discussion

forget about it. If a plumber does this they wouldnt care either.

TD80124882BimbobJun 06, 2025 12:42 pmWatchdj3000au17/09/20252Encasing a Sewer in Sydney is not as daunting as it soundsEncasing a Sewer in Sydney is not as daunting as it sounds

Building A New House

Yep when I was building my pool in 2023 it was 1k per meter to encase in concrete. The pool builder handled it all and it all went well.

Ashington Homes214594dj3000auSep 17, 2025 10:59 amWatchYou are hereBuilding ForumBuilding A New House
Browsing this forum

AhrefsBot [Bot], Google [Bot], Google Adsense [Bot], GoogleDocs [Bot], iAskBot [Bot], Pinterestbot [Bot], Trendiction [Bot] and 872 guests

Australia's largest home building and renovationcommunity with over 1.8 million posts

HomeProsForum Start a new topic About Join Community Advertise Contact Homeone Articles FacebookTwitter All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand © Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2025 Australia's largest home building andrenovation communityHomeoneAboutFeedbackTermsPrivacyCommunityJoin as a MemberStart TopicForumGuidelinesProfessionalsJoin as a ProDirectoryContact Us Follow homeone on FacebookFollow homeone on Twitter All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand © Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2025

Tag » How Deep Are Sewer Lines