Extract A Broken Screw (DIY) - The Family Handyman

Skip to main content How to Remove a Locking Lug Nut Without the Key How to Drive Screws Perfectly Tips for Loosening Nuts, Bolts and Screws Does This TikTok Hack for Removing a Stripped Screw Really Work? How to Use Pocket Screws How to Remove a Stripped Allen Screw Fixing a Screwy Electrical Box How to Fix Popped Drywall Nails and Screws How to Remove a Stuck Screw Safely Remove a Broken Light Bulb From the Socket How To Open a Stuck Drawer If You See a Screw Like This, Here's What It Means How to Fix a Stripped Screw Hole How to Remove a Nail Without a Head With an Easy Internet Hack Stripped Screw Hack: Use a Rubber Band to Grip Stripped Screws How to Fix a Twisted and Bent Car Key How To Cut a Screw Perfectly How to Remove a Stripped Allen Screw A Handy Splinter Extraction Tip Home Tools, Gear & Equipment Tools & Supplies

Extract a Broken Screw

By Family Handyman

Family Handyman's Editorial Process

Updated on Feb. 17, 2023

Remove a mangled screw will a drill and special extractor

Introduction

If you have a stuck screw or bolt and have mangled the head, try removing it with a special screw extractor. It usually does the job quickly and easily.

When you twist the head off a bolt, break a screw shank or mangle a screw head, you have a few options: In metal, you can completely drill out a bolt and restore the damaged threads with a tap. Likewise, you can drill out a wood screw and replace it with a larger one. But before you try these tricky methods, try a screw extractor, which usually does the job quickly and cleanly. You’ll find extractors at home centers and hardware stores for screw diameters from 3/32 in. to 1/2 in. or larger. Small extractors cost about $4.

Tools Required

• Drill bit set
• Drill/driver - cordless
• Hammer
• Locking pliers
• Screw extractor

Project step-by-step (3)

Step 1

Drill the Stuck Screw

Start by drilling a hole in the center of the broken screw using the drill bit size specified by the extractor manufacturer. If your drill bit won’t stay centered on the jagged, broken surface, switch to a smaller bit (1/16 in. or smaller). A smaller bit is easier to control and creates a shallow starter hole for the larger bit. Drill cautiously and apply only light pressure. The worst thing you can do is break off the drill bit inside the broken screw because removing a broken bit is almost impossible.

Step 2

Engage the Extractor

Next, insert the extractor into the broken screw hole and give it a firm tap with a hammer. Then push down on the extractor as you twist it counterclockwisewith locking pliers or a tap wrench to remove the screw. If the extractor threads won’t grab and turn the screw, try these other suggestions:

• Tap the extractor into the screw with a bit more force. Heat from a heat gun may also loosen stuck threads.
• In metal, apply a penetrating lubricant and let it soak in for 30 minutes.
• Enlarge the hole with a slightly larger drill bit and try again.

Sign Up For Our Newsletter

Complete DIY projects like a pro! Sign up for our newsletter! Sign up Do It Right, Do It Yourself! Step 3

Close-Up of Extractor

Extractors are available in several sizes to fit the approximate screw size.

For such a simple task, it’s surprising how many things can go wrong when you drive screws. We’ll show you how to perfectly drive screws so you can avoid all the frustration just by using the right screws and a few special tools.