Feeding Sourdough Starter: My Best Tips & Tricks - The Clever Carrot

Jump to Recipe

Learn how to feed, maintain, and care for a successful sourdough starter in 3 easy steps! Tips shared for choosing the best flour, the right jar, and how to keep it alive (without the stress).

Without fail, the most intimidating aspect of sourdough bread recipes is understanding how to feed and maintain your sourdough starter. If your starter is not strong, you can’t make sourdough bread, sourdough focaccia or anything else with a lofty-high rise. I discuss this in detail in my bestselling book Artisan Sourdough Made Simple. However, I’ve written a quick guide below so you can tackle this now.

First, let’s qualify the following: this post assumes you already have an established starter, either made from scratch, purchased or gifted to you. And now, you need trusted instructions on how to feed and care for it for optimal use. Sound like you? Read on.

In this post, you’ll find sourdough starter feeding instructions (at a glance) and (in depth) depending on how much instruction you need. I’ve also included tips on how to store & maintain your sourdough starter with helpful FAQs at the end. There’s a lot to cover, each section is connected to the next, so let’s begin with the basics: a simple definition and why ongoing care is important.

What Is Sourdough Starter?

Simply put: a sourdough starter is a live fermented culture of flour and water. Once it’s fed with additional flour and water (and left in a warm spot to rise, ideally 75+ F), it becomes bubbly and active. A small portion of this active starter is used to make bread dough rise. Instant yeast is not required.

Why Feeding Matters

Most bakers, especially beginners, don’t realize that you can’t just create a sourdough starter and walk away. It’s alive now. You need to take care of it. Expect to feed your starter every time prior to making bread dough AND while not in use to keep it alive and strong. Just like watering a plant or feeding a pet, feeding your sourdough starter is an ongoing relationship. What you put into the process is what you’re going to get out. Do the work. Make it count. Below is your list to get started.

Feeding Sourdough Starter (You Will Need):

• Sourdough Starter
• Jar with lid (I use this one)
• Kitchen Scale
• Bread flour or all purpose flour
• Water, filtered or quality tap water (that doesn’t taste like chlorine).

Need a sourdough starter? Try my Beginner Sourdough Starter Recipe with step-by-step instructions.

What Is The Sourdough Starter Feeding Ratio?

Before we jump into the mechanical step-by-step process, it’s helpful to know a simple tip upfront: most bakers feed their sourdough starter by ratio. Not specific amounts. Why? Because all bakers work with different quantities of starter to begin with. I might have 250 g of starter; you might have only 50 g of starter. Feeding by ratio streamlines the process for everyone, allowing you to scale up or down to suit your preference.

Let’s dive a little bit deeper…

There are different types of feeding ratios in sourdough. The most common feeding ratio is 1:1:1 (sourdough starter: flour: water) also known as a 100% hydration starter. That’s what you’re going to learn here. It’s an excellent starting point for most recipes including my famous sourdough bread recipe.

Now let’s understand how the 1:1:1 feeding ratio works. Let’s say you have 40 g of sourdough starter in a jar. To feed it, you would add 40 g of flour + 40 g of water. This is referred to feeding with equal parts by weight. You need a scale for this, not measuring cups, which go by volume. As another example, if you have 20 g starter in a jar, your would feed it with 20 g flour + 20 g water. Make sense? Remember, you can scale the ratio up or down depending of the quantity you have.

TIP: Texture is key. While following a feeding ratio is helpful, use it as a guide only. It doesn’t have to be exact. This is because your starter will look different on different days, due to the following variables: type/brand of flour used, temperature, flour absorption rate etc. So, if you’ve followed the feeding ratio and your starter is too thick, add more water to thin it out. If it’s too thin, add more flour. The texture is always adjustable. It should look like thick pancake batter.

Ok, so let’s quickly re-cap: we’ve defined sourdough starter, why feeding matters, gave you a supply list and touched on feeding ratios. Up next: how to feed your sourdough starter at a glance and in depth. This is what you came here for.

How To Feed Your Sourdough Starter (At A Glance)

1. Remove and discard half of your sourdough starter.
2. Feed what’s left in the jar with equal parts flour and water by weight (1:1:1 feeding ratio).
3. Let rise at room temperature (loosely covered or airtight) ideally 75+ F, until bubbly, active and double in size (2-12 hrs).

*NOTE: Before you begin, establish a regular feeding time. Morning or evening; the time itself doesn’t matter. What does matter is consistency. Feeding your starter at roughly the same time each day will train it to rise and fall predictably. This way, you’ll know when it’s ready to use. For example, if you want to make dough at 7 PM (and your starter takes about 5 hrs to rise), feed it at 2 PM.

Feeding Sourdough Starter (In-Depth)

1. Step #1: Remove and Discard. Before every feeding, the first step is to discard a portion of your sourdough starter to refresh the acidity levels, to keep it balanced, and to control it’s overall growth in size. This step is important. To do so, pour off or scoop out the discard with a spoon. Where does the discard go? Well, if it’s extremely smelly or discolored, it goes in the trash. If it’s in good condition, save it to make a sourdough discard recipe. Example: You have about 120 g of sourdough starter in a jar. The first step is to remove half, about 60 g. The sourdough discard is in good condition so you save it in a separate bowl to make my fluffy sourdough pancakes. Please don’t feel pressured to use the discard right away; the focus of this post is to teach you how to feed your starter, not 20+ Sourdough Discard Recipes. My intent is a simple introduction to possibility.
2. Step #2: Feed The Starter. Back to the jar. The next step is to feed what’s left in the jar with equal parts flour & water by weight following the 1:1:1 feeding ratio (sourdough starter: flour: water). Continuing with our example: You have 120 g of starter and removed half, about 60 g. You now have 60 g of sourdough starter left in the jar. Feed what’s left in the jar with 60 g flour + 60 g of water. Mix well with a fork, scraping down the sides until the texture turns into a thick, lump-free batter. Place the lid on top, loosely covered or airtight.
3. Step #3: Wait For The Starter To Rise & Activate. The final step is to place your starter in a warm spot to activate, ideally 75-80 F. Temperature is really important. The warmer it is, the faster it will rise. Your starter is active when it shows the following signs: it doubles in size, small and large bubbles appear on the surface and throughout the culture, the texture is spongey or fluffy and it exhibits a pleasant aroma. This can take anywhere from 2-12hrs.

TIP: What goes up must come down. An active sourdough starter, one that has doubled in size, will eventually fall back down. This is normal. There’s nothing wrong with your starter when it falls; it’s just losing its strength as it goes down. It will only stay fully risen for 1-2 hours (this varies). Use it to make bread dough at peak height.

How To Store Sourdough Starter

Now that you’ve learned how to feed your sourdough starter, you’ll need to maintain it with regular feedings even when not in use for making bread dough- otherwise your bread won’t rise. Your feeding maintenance routine is directly related to where it’s stored and how often you plan to bake.

• Room Temperature: if you bake a few times a week, keep your starter at room temperature. You’ll need to feed it (1x) per day, even when not in use. Storing at room temperature, especially if it’s warm, will make it ready to use faster.

• In the Fridge: if you bake only once a week or once a month, store your starter in the fridge. Feed it (1x) per week to maintain it’s strength. You do not need to bring it to room temperature first before feeding it; just remove it from the fridge, feed it and put it back. When ready to use, feed the cold starter at room temperature until it perks back up. Use warm water. Find a warm spot. Remember, the warmer it is, the faster it will rise.

Feeding Sourdough Starter FAQs

Most of the questions below have been answered throughout the blog post. However, some questions are new. It’s important to read through the material several times for the information to sink in.

Q: Why do we remove and discard sourdough starter?

This is the #1 question asked about the feeding process. While it might feel wasteful, it’s done to refresh the acidity levels and to control the starter’s growth in size. I recommend removing half as a guideline, but the exact quantity is not set in stone. Some days you’ll remove more or less, depending on what the starter looks like. If you do not discard (and yes, some bakers choose to do this), your starter would grow exponentially making it difficult to maintain. But remember! You don’t have to throw the discard away.

Q: What should I do with sourdough discard?

Make sourdough discard recipes. Additionally, you can save discard in the fridge, freeze it, share it, or create a new starter.

• Best Sourdough Pancakes
• Crispy Sourdough Waffles
• Overnight Sourdough Apple Cake
• Moist Sourdough Blueberry Muffins
• Ultimate Sourdough Banana Bread
• Secret Ingredient Sourdough Cornbread

Q: What if I don’t have a scale? Can I use measuring cups to feed my starter?

Yes, absolutely. However, “equal parts by weight” does not translate into measuring cups. Why? Because 1/4 cup flour does not weigh the same as 1/4 water. You can certainly use “equal measurements” if you’d like, but you will most likely need to adjust the texture slightly. Add more/less flour and water to achieve a thick, batter-like consistency.

Q: Do I need to feed and activate my starter every time before using it?

Yes. You cannot bake with inactive starter. To activate your starter, feed it with fresh flour and water, and then wait for it to bubble and double in size. Feeding a starter is not a once off activation process (like a new cell phone).

Q: What if I forget to feed my starter?

Totally normal. We all forget at some point. It’s not dead (and you didn’t ruin it). Please keep feeding it until it becomes bubbly and active. For best results, find a warm spot and use warm water for a boost. Starters are more resilient than you’d think- they just need time and patience.

Q: What’s the best flour for feeding sourdough starter?

Starters like routine. In my experience, it’s best to feed your main jar of starter with the same flour it’s made of.

For white flour starters, use unbleached all purpose flour or bread flour. These flours are inexpensive, easy to find, and reliable for starter growth. For whole wheat starters, use whole wheat flour. For rye starters, use rye flour etc.

For variety, some bakers prefer to use a 50/50 blend of whole wheat and white flour for an enzyme boost (starters love enzymes). This is fine too. See what works best for your taste, your budget and your convenience level.

Just do me one favor: when choosing flour, always consider how the starter will be used.

For example, a 100 % whole wheat starter might not work for Soft Sourdough Cinnamon Rolls because the unsifted bran will make the dough more hearty, rather than light and airy. On the flip side, it might be more desirable for Light Whole Wheat Sourdough to really amplify the nutty, wholegrain taste.

Q: What’s the best jar or container for sourdough starter? Does it need to be airtight?

Currently, I use a 3/4 L glass jar with a latch top. I love it. I prefer glass over plastic, it’s easy to clean and it doesn’t absorb any weird smells or chemicals.Oftentimes, I switch things up and use jam jars, glasses and/or whatever else is clean! My friend Jim recently sent me this sourdough starter jar to try- it’s really cool. Whatever you choose, make sure the jar is large enough to accommodate the starter’s growth when it doubles in size- this is key.Regarding the lid: it can be airtight or loosely covered. It depends on the baker. For example, when I want my starter to bubble up fast, I keep it airtight. But if the jar is not large enough for the starter to grow, it might burst through the lid. Always keep an eye on it. Alternatively, rest the lid on top of the jar without securing it. This way, the jar is technically still covered but it won’t break as the starter rises.

Q: How long will it take for my starter to rise?

The activation process is not instant. Plan on 2-12 hrs. depending on temperature and the strength of your starter. The warmer it is, the faster it will rise.

Q: Can you recommend a warm spot for my starter to rise?

Potential warm spots include a proofing box, a microwave with the light on, or inside the oven (turned off) with the light on for 1-2 hours but not overnight- the environment will become too warm. You can also try a warm water bath, with frequent water changes to maintain temperature.

Q: What is hooch?

At some point, you’ll experience a dark, grayish liquid on the surface of your sourdough starter. Don’t stress. Hooch is just a sign that your starter needs to be fed. Simply pour it off, removing any discolored starter underneath and give it a fresh feeding. The image below features two different starters I keep in the fridge: Country Starter (fed with 50/50 white flour + whole wheat) and my Basic Starter (all white flour) both with a layer of hooch on the surface.

By signing up, you agree to receive emails from The Clever Carrot. Unsubscribe at any time.

clock clock iconcutlery cutlery iconflag flag iconfolder folder iconinstagram instagram iconpinterest pinterest iconfacebook facebook iconprint print iconsquares squares iconheart heart iconheart solid heart solid icon

Description

Learn how to feed and maintain a successful sourdough starter in 3 easy steps! Tips shared for choosing the best flour, the right jar, and how to keep it alive (without the stress).

Ingredients

• Sourdough Starter
• Jar with lid (I use this one)
• Digital Kitchen Scale
• Bread flour or all purpose
• Water, filtered or regular quality tap water

Cook Mode Prevent your screen from going dark

Instructions

*Note: Before you begin, establish a regular feeding time. Morning or evening; the time itself doesn’t matter. What does matter is consistency. Feeding your starter at roughly the same time each day will train it to rise and fall predictably. This way, you’ll know when it’s ready to use. For example, if you want to make dough at 7 PM (and your starter takes about 5 hrs to rise), feed it at 2 PM.

1. Remove and discard half of your sourdough starter from the jar.
2. Feed what’s left in the jar with equal parts flour and water by weight (1:1:1 feeding ratio). You need a digital kitchen scale for this. Because we all work with different quantities of starters, this 1:1:1 feeding ratio is best understood by example. So, if you have 60 g of starter in the jar, feed it with 60 g flour + 60 g water. If you have 30 g of starter, feed it with 30 g of flour and 30 g of water. Mix well with a fork, scraping down the sides as needed. Cover the jar with a lid. The lid can be airtight or loosely placed on top- your choice. Note: if the jar is airtight, the pressure will build up fast. Keep an eye on the jar so it doesn’t burst.
3. Let your starter rise at room temperature, ideally 75+ F (the warmer it is, the faster it will rise), until bubbly, active and double in size (2-12 hrs). When your starter is at peak height, it’s ready to use. Eventually it will fall back down, and become inactive again. Then, you’ll need to repeat the feeding process.