Find How Much Sand You Need - Inch Calculator

Calculate how much sand you need by entering the dimensions and material type below.

Calculate UsingLength, Width & DepthArea & DepthVolume Lengthinftydcmm Widthinftydcmm Depthinftydcmm MaterialSand (dry)Sand (wet)Gravel (¼" - 2")Topsoil (dry)Topsoil (wet) Price (optional)$per tonper cu yd Areafind square feetsq ftsq ydssq m Depthinftydcmm MaterialSand (dry)Sand (wet)Gravel (¼" - 2")Topsoil (dry)Topsoil (wet) Price (optional)$per tonper cu yd Volumefind cubic yardscu ftcu ydscu m MaterialSand (dry)Sand (wet)Gravel (¼" - 2")Topsoil (dry)Topsoil (wet) Price (optional)$per tonper cu yd Question Mark Icon ×Close dialog

Have a Question or Feedback?

Name (optional) Email (optional) Question or Feedback Submit Feedback

Results: Sand Needed

tons

cu yds

Estimated Material Cost

$ Learn how we calculate this below Share Icon Share Results Embed IconAdd This to Your Site ×Close dialog

Share This Result

Facebook Icon Share on Facebook X Icon Share on X Pinterest Icon Share on Pinterest LinkedIn Icon Share on LinkedIn Link to Results: Copy ✓ Copied! Error! Cite This Page: Copy ✓ Copied! Error!

On this page:

Show/hide table of contents Chevron Down Icon

• Sand Calculator
• How to Calculate Sand
• Step One: Calculate Volume in Yards
• Step Two: Calculate Sand in Tons
• Sand and Landscaping Material Weight
• How to Account for Overage
• Frequently Asked Questions

Person Icon By Joe Sexton

Joe is the creator of Inch Calculator and has over 20 years of experience in engineering and construction. He holds several degrees and certifications.

Full bioChevron Right Icon Review Badge Icon Reviewed by Sarabeth Asaff South

Sarabeth is an expert in the home and garden industry and was formerly a certified kitchen and bathroom designer. She is a subject matter expert in home improvement and is often quoted in notable publications.

Full bioChevron Right Icon Link Icon Copy Link Facebook Icon Share on Facebook X Icon Share on X Pinterest Icon Share on Pinterest Cite Icon Cite ×Close dialog

Cite This Page

Sexton, J. (n.d.). Sand Calculator. Inch Calculator. Retrieved February 10, 2026, from https://www.inchcalculator.com/sand-calculator/

How to Calculate Sand

If you’re planning a landscaping project, you might be asking yourself, how much sand do I need? To calculate sand for a project, follow these easy steps.

Step One: Calculate Volume in Yards

The first step to calculating sand is to estimate the volume of material needed in cubic yards. Measure the length, width, and depth of the area you need to fill in the same unit of measurement.

This can be inches or feet; the depth of the sand will likely determine which measurement is easier for you to work with.

Then, multiply the length, width, and depth together to find the volume.

For example, if you are filling a playground area that is 120″ long, 140″ wide, and 10″ deep, then you will have a volume in cubic inches of 168,000 cubic inches.

volume = 120″ × 168″ × 10″ = 168,000 cu in

If you are filling an area that is 10′ long, 15′ wide, and 1′ deep, you are filling an area that has 150 cubic feet.

volume = 10′ × 15′ × 1′ = 150 cu ft

Cubic Yards Formula Using Inches

There are 46,656 cubic inches in a cubic yard, so if you measured in inches, then divide the volume measurement by 46,656 to get cubic yards.

cubic yards = cubic inches ÷ 46,656

Cubic Yards Formula Using Feet

There are 27 cubic feet in a cubic yard, so if you measured in feet, then divide the volume measurement by 27 to get cubic yards.

cubic yards = cubic feet ÷ 27

You can also just use our cubic yardage calculator to easily calculate this.

Step Two: Calculate Sand in Tons

Now that you know how much sand you need in cubic yards, you can find the weight in tons by multiplying that by the material density.

How Much Does a Yard of Sand Weigh?

The density of sand varies depending on the size of the grains and its moisture content, which affects the weight. Dry sand weighs 1.3 to 1.5 tons per cubic yard, while damp sand weighs 1.5 to 1.7 tons per cubic yard.

Having more earth, soil, or clay in the mix will increase the weight per yard as well.

Finer sand will also have a higher weight per yard, while coarser sand will have a lower weight per yard. The larger the grains of sand, the lighter your total volume will ultimately be.

Cubic Yards to Tons Formula

Using the volume in cubic yards and the weight of sand per yard, use the following formula to find how much you need:

sand (tons) = sand (yds) × density (tons/yd)

Thus, the amount of sand needed in tons is equal to the volume in yards times the density.

Use our gravel, stone, and soil calculators to estimate other landscaping materials.

Sand and Landscaping Material Weight

Refer to the chart below for the weight of sand, gravel, and other landscaping material.

Weight per cubic yard and cubic meter of sand, gravel, and soil

Material	Weight per Cubic Yard		Weight per Cubic Meter
	Pounds	Tons	Kilograms	Metric Tons
Sand (dry)	2,600 – 3,000 lbs	1.3 – 1.5 tons	1,540 – 1,780 kg	1.54 – 1.78 tonnes
Sand (wet)	3,000 – 3,400 lbs	1.5 – 1.7 tons	1,780 – 2,020 kg	1.78 – 2.02 tonnes
Gravel (¼” – 2″)	2,800 – 3,400 lbs	1.4 – 1.7 tons	1,660 – 2,020 kg	1.66 – 2.02 tonnes
Topsoil (dry)	2,000 – 2,600 lbs	1 – 1.3 tons	1,190 – 1,540 kg	1.19 – 1.54 tonnes
Topsoil (wet)	3,000 – 3,400 lbs	1.5 – 1.7 tons	1,780 – 2,020 kg	1.78 – 2.02 tonnes

How to Account for Overage

Sand is a loose material that can shift, move, and migrate easily. The finer the sand, the more likely it is to move or migrate as well. This means that during the transport or moving of the sand from the truck to the final site, you may experience some material loss.

In addition, the sand may settle slightly over time, and depending on the area being filled, there can sometimes be unseen voids that will absorb added material.

To account for these issues, it is recommended that you increase the amount of material you need by 10% to make sure you have enough for your project. If your project calls for 10 tons of sand, it is best to order 11 tons to account for these potential losses.

Frequently Asked Questions

What are the different types of sand?

Sand classifications can be done by size or origin, with sand being classified by size as fine (0.075 to 0.425 mm), medium (0.425 to 2 mm), and coarse (2.0 to 4.75 mm). If classified by origin, sand is classified as pit, river, sea, and manufactured.

Does the type of sand affect the weight?

Yes, the finer the grain of sand you purchase, the heavier the material will be by volume.

Do you buy sand by the yard or ton?

You can purchase it by either, but this will depend on the supplier. In most instances, bulk orders will be by the ton and small amounts by the yard.

What is sand used for?

Sand has a lot of uses, including creating a base for a playground area, filling the spaces between patio pavers or bricks, adding weight to objects, or filtering water and assisting with drainage. Sand can also be added to other materials, including concrete, grout, and paint to add texture and durability.