Five Steps To Make An Eucalyptus Didgeridoo - Wakademy

Maybe your like

Five steps to make an eucalyptus didgeridoo

Gauthier Aubé
02/19/2021
6 Comments

A didgeridoo is a eucalyptus trunk naturally hollowed out by termites. However, several stages separate the trunk in its natural state from the finished instrument. And the know-how of the didgeridoo crafter (didg-maker) proves to be essential. Here then are the different stages of production of a eucalyptus didgeridoo. These photos were taken during my trip to Australia, where I was making my didgeridoo with Bob Druett in Darwin. Are you ready for a journey into the workshop of one of the best didg-makers in the world? Here goes! The Australian bush on the wet saison

The Australian bush in the rainy season… watch out for crocodiles!

Step 1: Cutting the eucalyptus

First of all, be aware that to find your eucalyptus trunk it will be necessary to face the heat and humidity of the bush (when I was there it was 40° with nearly 90% humidity). To this, add the flies, renowned for staying glued to faces even whilst being shooed away. They even come to ‘nibble’ around your eyes to drink! You now have a little insight into local life. In this wilderness, the motivated (!) didgeridoo maker must find the hollow eucalyptus trunks. Their work is to spot the trees that will be sufficiently, but not overly, hollowed out. The didg-maker then cuts the eucalyptus at the base in order to keep a section of trunk around 2m long. Eucalyptus trunk on the Australian bush

Eucalyptus trunks cut in the bush in December 2007 during my trip in Australia.

Step 2 : Drying the trunk

After emptying out the termites’ tunnels and removing the bark, the trunk is taken back to the workshop where it starts a period of drying that can last anywhere between 6 to 8 months. Once the wood is perfectly dry, the didgeridoo maker faces their greatest challenge: to extract the best possible instrument from the trunk. And that’s no small feat… By nature, termites don’t hollow out trees uniformly. The interior of the trunk is strewn with hollows and recesses, which can prove to be as much qualities as they can defects for our future instrument. And it’s here that the art of the didg-maker resides. They will need to cut the trunk at the right place to reveal the final didgeridoo still hidden within the mass of wood. And when you consider that the average size of an instrument is between 1.2m and 1.8m and that you can reduce the length of the trunk from either end, you quickly understand the combinations are almost infinite!

Step 3 : The inside of the didgeridoo

The trunk is now the right size; however, we’re not yet talking about a real didgeridoo. The interior now has to be re-dug in order to hone the playability and improve the acoustic properties. As for the bell, it is widened to allow the sound to resonate better. All of this stage is a true work of fine craftsmanship. On this subject, I remember an anecdote from Bob’s workshop. I was hollowing out the bell of my future didgeridoo (cf. photo). All was well, until I had the misfortune to remove a few too many millimeters in the thickness of the wood (over just one square centimeter!). This mistake (which I had not imagined would be so serious) had the effect of unbalancing the entire play of the instrument. It took Bob two hours to remove several shavings of wood from the top part of the didgeridoo in order to regain the initial playability. Ouf! My didgeridoo was saved! Before and after the bell cleaning

The bell is ‘cleaned’ to improve the sound of the didgeridoo

Step 4: The outside of the didgeridoo

After the inside, the outside. The didgeridoo now goes on a real slimming programme! The didg-maker will remove the surplus wood to give the instrument its final shape. Here again, precision is required, as the thickness of the wall must be regular along the entire length, which risks causing tensions that can make cracks appear. It is also necessary to spot the termites’ tunnels in advance in order to avoid the appearance of holes in the body of the instrument. Remember, termites like to dig crookedly..! These are the same tunnels which appear as bumps on the exterior of the finished didgeridoo. Before and after the didgeridoo outside cleaning

Before and after the didgeridoo outside cleaning

Before and after the exterior work is carried out. We can see the bumps on the didgeridoo, remnants of the termites’ tunnels.

Step 5 : The finish

Our didgeridoo is almost finished. The tone is adjusted and then come final touches individual to each didg-maker. In our case, several thin coats of varnish were applied to the interior and exterior in order to protect the wood, to give it its shine and bring out the acoustic qualities of the instrument. All that remains is to add a beeswax or wooden mouthpiece and it’s ready! The varnish on the didgeridoo

The didgeridoo is covered in several coats of varnish in order to enhance the veins and the colours of the wood.

I played that didgeridoo on the track “L’exil”. You can listen how it’s sounds!

Conclusion: To make a didgeridoo is a real craft!

To be a didg-crafter, you can’t just make it up! One learns over time, constantly refining one’s approach. And rare are the makers who’ve pushed the requirement for detail and perfection as far as Bob Druett (I will write a post with 5 of those didge-crafter). In the meantime, don’t hesitate to share your questions or your own experiences of making didgeridoos.

About the Author

Gauthier Aubé

Hello didgeridoo friends! My name is Gauthier Aubé and I am the founder of Wakademy, the French didgeridoo school. If you're wondering how Wakademy can help you progress on the didgeridoo, I invite you to visit this page. Until then, long live the music! ?

What would you like to learn?

••• BEGINNER LEVEL COURSE •••

Stop Stopping, Master Circular Breathing!

Learn circular breathing in 4 simple, easy-to-follow steps. You’ll be surprised at how much easier it is than it looks!

Start now! ••• COURS NIVEAU intermédiaire •••

Développer votre sens du rythme

Pour jouer des rythmes qui sonnent, il faut comprendre comment le souffle structure le rythme. C'est ce que je vous montre ici !

Commencer Commencer maintenant ••• INTERMEDIATE LEVEL COURSE •••

Increase Your Speed, Master the wobbles!

Wobbles will help you build speed like no other technique. An absolute must!

Start now!

Shall we continue reading? 🤗

Some didgeridoo covers with didgeridoo inside

Didgeridoo beginner Gauthier Aubé

6 covers to protect your didgeridoo

22/04/2021 No Comments

Events

Discover the Must-Attend Didgeridoo Festivals of 2023

23/05/2023 No Comments A didgeridoo bell

Didgeridoo tips Gauthier Aubé

3 techniques to develop your didgeridoo melodies!

22/04/2021 No Comments Gandalf with a didgeridoo

Posts

From intuition to reason: the way to become Gandalf at the didgeridoo!

22/04/2021 No Comments

Didgeridoo techniques Adrien B

How my Zoom H4n helps me progress with the didgeridoo

06/02/2024 No Comments

Music and didgeridoo Gauthier Aubé

10 Australian Didgeridoo Players You Should Know!

26/04/2021 4 Comments

Didgeridoo beginner Gauthier Aubé

Rhythm, tempo, measure and pulsation: what you need to know about music theory (part 1)

22/04/2021 No Comments Home made Didgeridoo still in work

Didgeridoo crafters Gauthier Aubé

How about making your own didgeridoo ?!

22/04/2021 No Comments Image from the video

All the videos Gauthier Aubé

Didgeridoo Lesson 4 | Learn circular Breathing in 4 steps!

25/03/2021 No Comments

6 Responses

Hello, I’m interested in finding a place I can buy a Piece of the wood to make one. Looked on the net and couldn’t find any. Thank you David
Log in to Reply
1. Hi David! Yes it’s quite hard to find a piece of eucalyptus for sales… You may ask Gregory from Didgeridoo-passion, maybe he can help you? (I don’t know…) Contact him from me here.
  Log in to Reply
Hi uhave defatted a seasoned my digi I’m have trouble with cleaning out in side I only have home tools can u help thank u janeen
Log in to Reply
1. Hi Janeen, Unfortunately, I’m not a big expert in didgeridoo making. But you can contact my friend Greg who is running the shop didgeridoo-passion. He is making some eucalyptus didgeridoo, He may be able to help you ! Here his contact page. Tell him you’re from Gauthier!
  Log in to Reply
How long did it take to make your Austrailian Didg?
Log in to Reply
1. Hi Mark, It’s quite difficult to say because we worked during fews days and stop 2 weeks. Also the vernish needed time to dry. But I will say, if we worked every, in 2 weeks max it will be done.
  Log in to Reply

Locked Content

The art of the didgeridoo

14 chapters|124 lessons|Level ApprenticeUnlock

The secret of the 7 breaths

14 chapters|117 lessons|Level ProficientUnlockFREE LESSONS

The circular breathing

1 chapter|8 lessons|Level ApprenticeUnlockFREE LESSONS

Mastering wobbles

1 chapter|8 lessons|Level ProficientUnlock

Tag » What Is A Didgeridoo Made Of