Fixes For Moisture Detected Error Samsung Galaxy S10

Use a Hair Dryer

Using a hairdryer to dry out any water in the case can help greatly to remove any water inside the phone.

If you do not have a hairdryer, placing the phone in front of a fan for a few hours can also help in some cases.

The main thing is to try to dry the phone out from any water that may be inside.

Place Phone in Rice

Rice is widely used to dry out wet smartphones after they get wet.

Using rice is a great way to help remove moisture that may be inside the case.

Check Charging Port for Debris

Examine the charging port for any dirt or grime that may be inside.

Dirt is known to trigger the sensor to think water is present inside the unit.

Use a flashlight and examine the port closely, removing any debris that may be inside the port.

Clean the Port with Q-tips and Isopropyl Alcohol

If the port is very dirty, it can be cleaned with Q-tips and a small amount of Isopropyl alcohol.

This is often done when the port is very grimy and dirty.

Clear Cache

Many users have reported good success with clearing the cache on the phone.

How To Clear the Cache on a Samsung Galaxy S10

1. Go to Settings.
2. Select Apps.
3. Click the three dots in the top right.
4. Click System Apps.
5. Scroll down to USB settings app.
6. Click on storage.
7. Click both clear storage, and clear cache.
8. Restart your phone.

Use a Wireless Charger

Using a wireless charging pad removes the port from charging the phone and can help when the phone has port problems.

Wireless charging pads are low-cost devices that work very well.

Many users also have had good luck when using a standard slow wall charger and not using the fast charger.

Factory Reset

A hard reset will set the phone back to the original default state as when it was bought.

All data will be deleted and gone, including text, phone numbers, apps, and more.

Some users have reported that this has helped to clear the problem but keep in mind all personal settings and information will be deleted from the phone.

How To Factory Reset a Galaxy S10

1. Go to Settings
2. General Management
3. Reset
4. Factory data reset
5. Scroll down and tap Reset
6. Enter your PIN or Password
7. Click Delete All