Frequently Asked Questions - Ario Vape

Can I unplug the Ario Vape from the charger before it has reached a full charge?

Yes you can.

Can I use an Ario device while it's charging?

While we do not recommend doing so, it is possible. Make sure you are using the included charging cord.

How do I know when my vape pen is fully charged?

While an Ario device is charging the light will be red. Once it's fully charged, the light will be green. To preserve battery, the light goes off after a while, so if there is no light at all, it's likely fully charged and you can remove it.

What is the best way to care for a vape device?

When the need arises, usually because of little or no vapor, or just to keep your vape pen in prime condition, it's very simple to clean.

Wet a cotton swab with some Isopropyl Alcohol and gently swab the top where the cartridge threads screw in. Also rub around the bottom of the cartridge threads to remove any oil residue there. If you have a Contour/drop in device, you can clean around the bottom of that too. Allow device to fully dry before using it again, usually within just a few minutes.

What does it mean when the lights blink white?

White blinking lights usually mean that the battery charge is almost completely out and should be recharged. On most Ario devices there is a light system to indicate battery life: when you push and hold the button and a green light appears, it means there is 20 - 100% battery life remaining. When you push and hold the button and a red light appears, it means there is less than 20% battery life remaining so you should charge soon.

Another potential reason for white blinking lights is that the cartridge you're using is a fake/knock-off of a proper cartridge. So try charging your device fully first, and then try your cartridge/s again.

Is any Ario device waterproof?

No, Ario Vape is not resistant to water, or waterproof.