Google Pixel 3a USB-C Port Replacement - IFixit Repair Guide

Skip to main content Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Google Pixel 3a USB-C Port Replacement

Introduction

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Follow this guide to remove and replace a damaged USB-C port for the Pixel 3a. The USB-C port is completely modular and simple to replace.

The Pixel 3a’s unreinforced display panel is fragile. If you are reusing the screen, be sure to pay special attention to the warnings in the opening procedure.

The trickiest part of the procedure is re-attaching the proximity sensor connector, which requires some patience and finesse.

What you need

1. Step 1 Screen

   

   • Take note of the two seams on the phone:

   • Screen seam: This seam separates the screen from the rest of the phone. This is where you should pry.

   • Frame seam: This is where the plastic frame meets the back cover. It is held in place by screws. Do not pry at this seam.

   • Before you begin prying, note the following areas on the screen:

   • Screen flex cable: Do not pry deeper than instructed, or you risk damaging this cable.

   • Adhesive perimeter: Prying beyond the narrow perimeter without angling the pick will damage the display panel.

   Edit 3 comments