How Do I Refill The Stamp Ink? | Brother

• Products
• Supplies
• Support & Downloads

• Home
• South Africa
• SC-2000USB
• FAQs & Troubleshooting
• Maintenance
• Machine Maintenance
• faqp00001517_000

SC-2000USB

FAQs & Troubleshooting

• Contact Us
• Product Registration
• Visit www.brother.co.za

• Date: 18/11/2020
• ID: faqp00001517_000

• Print
• E-mail

How do I refill the stamp ink?

If the stamp is faint or incomplete, use the ink bottle (sold separately) to refill the ink.

1. Remove the holder from the stamp.
2. Use the ink bottle to add five drops of ink to each refill hole in the stamp.

   Be extremely careful when adding ink. Do not use ink other than that specified, otherwise the stamp may be damaged. If too much ink is added, it may start leaking from the stamp's surface. In that case, make a test stamp on scrap paper to remove any excess ink.

3. Put the holder back on the stamp.

   Immediately after refilling the ink, keep the stamp facing down until the ink begins to flow from the stamp. After refilling the ink, be sure to put the cap back on the refill ink bottle.

If your question was not answered, have you checked other FAQs?

• Go to the Top page in the FAQs & Troubleshooting section
• See other FAQs in this category

Have you checked manuals?

• Go to the Manuals section

If you need further assistance, please contact Brother customer service:

• Go to the Contact Us

Related Models

SC-2000USB

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

• Very helpful
• Helpful
• Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit

Machine SetupConnecting to a ComputerP-touch Editor (Windows)SoftwareMachineOperating SystemMaintenanceInstallationSoftwareP-touch Editor (Windows)Error Messages/LED IndicationsConnecting to a ComputerPrintingUninstallationOperating SystemInstallationSpecifications

General Setup Procedures USB Printer Driver MacWindows Printer Driver Machine Maintenance Installation FailureCannot Print Cannot PrintPrint Quality/Print Settings ProductConsumables&Accessories Printer Driver Software Software Barcodes Error Messages on your Computer's Screen Barcodes Windows Operations

Support & Downloads

SC-2000USB

Not your product?

• Downloads
• FAQs & Troubleshooting
• Manuals
• Supported OS

South Africa(English)

Change Countries or Region (Language)

• Site Map
• Legal
• Privacy Policy
• Global Site
• View Mobile Version