How It Works: Lights That Switch Themselves On And Off

Maybe your like

Subscribe to our stories, so you don't miss out on anything: Subscribe Hereby I give my consent to the processing of my personal data for the purposes of sending information about products, services and events related to Škoda Auto. Unsubscribe How it works: lights that switch themselves on and off

How it works: lights that switch themselves on and off

Drivers can get used to it quickly: they put the lights into automatic mode and forget all about them. But how does it work? When do the lights switch themselves on and off? Let’s take a closer look at this “invisible” function with visible effects.

8. 9. 2020 Škoda World Innovation & technology

An automatic mode for lights is mandatory for new cars throughout the European Union. If drivers have this mode activated, they does not have to think about switching their lights on or off every time they drives. During daylight hours, their car’s lights function in daytime running lights mode.

“There are also regulations covering the time a car’s lights take to react to a change in the light conditions or switch from daytime to nighttime mode,” explains Boris Trávník, external vehicle lights electronics coordinator in Technical Development at ŠKODA.

How the automatic mode for lights works

When you enter a tunnel, for example, the daytime running lights switch to low beam within two seconds. A sensor behind the windscreen, either in the rearview mirror or in the middle of the dashboard, senses that the light conditions outside have changed and that nighttime mode is required. The type of sensor depends on the vehicle’s configuration.

Automatic light sensor

The sensor does not just control the car’s lights: it collects data for the windscreen wipers and air conditioning as well. The data are then evaluated by the BCM (Body Control Module), which is a control unit performing calculations and passing on instructions, e.g. to the headlights. The BCM is located beneath the dashboard, close to the fuse box. The RLFS sensor (RLSF is an abbreviation formed from the German words for rain, light, humidity and sun) in the rearview mirror picks up both light and energy in the infrared spectrum. By detecting refraction it can also tell whether it is damp outside or raining. Depending on the result, the sensor sends a clear instruction to the BCM whether to activate the lights and windscreen wipers or deactivate them.

The simpler version of the light sensor located on the dashboard only monitors the visible light spectrum around the car. “Both versions of sensors are designed in a way ensuring that the electronics can tell the difference between going into a tunnel and driving along a tree-lined road, say. In other words, whether the car has entered darkness or merely shade,” Trávník explains.

Boris_Travnik-copy Boris Trávník Coordinator - Vehicle Lighting Electronics

Dusk or driving through a tunnel are not the only things that trigger the switch from daytime running lights to low-beam headlights. If the windscreen wipers are turned on manually or automatically and operate for one minute, the electronics send an instruction to change from daytime to nighttime mode. The only lights that need to be switched on or off manually are fog lights. Don’t forget to switch them on when visibility is poor!

The automatic lights mode and Full LED matrix headlights

The automatic lights mode makes life easier for drivers and lets them focus all their attention on their driving. “Unless there’s fog or heavy rain, drivers don’t have to worry whether they have switched their lights on or not or if they are using the right lights,” Boris Trávník says. “And at night the automatic mode adapts the lights’ functioning to the driving mode,” he adds, describing another function offered by modern Full LED matrix headlights on ŠKODA cars. These headlights ensure maximum visibility for the driver while preventing people in oncoming cars from being dazzled.

Button module for the new generation of the ŠKODA OCTAVIA

Rotary lighting control

In most ŠKODA cars you activate the automatic regime by turning the lights control switch to AUTO. The fourth-generation OCTAVIA model has more automated lights, which are controlled by a “button module”. When the vehicle is parked, the lights can be in AUTO, low beam or outline lights mode or completely off. While driving, the driver can choose between AUTO and low beam. That ensures drivers don’t completely switch off the lights by mistake while driving. Whatever lights mode is activated when you turn the engine off, AUTO mode is activated automatically the next time you start the car.

Next up in Hidden Helpers series

17. 10. 2024

Making driving easier. How cruise control works

10. 5. 2024

They save lives. How airbags work

1. 2. 2024

Not just shining in the dark. Lights have to do more than that

19. 7. 2023

A good view and protection. What’s important in car glass?

21. 2. 2023

4x4 for greater safety and for driving pleasure

3. 1. 2023

Beep beep!

27. 10. 2022

Tips for getting the best sound

9. 8. 2022

The approach of the keyless age

21. 6. 2022

How are cars set up for music and phone calls?

7. 4. 2022

How do brakes learn how to brake

20. 1. 2022

This is your car, can you hear me?

14. 9. 2021

Shock absorbers: it’s a hard life

Show more Show less You must provide an e-mail. Subscribe now! Please accept the terms before continuing. Hereby I give my consent to the processing of my personal data for the purposes of sending information about products, services and events related to Škoda Auto. Manage subscription

Explore more

Smart Dials: a smart solution for air-conditioning and more

MPI & TSI. Škoda in charge of combustion engines for 7 brands

How are cars set up for music and phone calls?