How Long Does It Take To Stop A Train? It Depends On Several Factors

Maybe your like

Statesman LogoHearst Newspapers LogoSkip to main contentTRENDING:Austin weather|Texas gas prices rising|Trump targets Talarico|Britney Spears arrested|Best coffee in Austin|I-35 closuresNewsHow long does it take to stop a train? It depends on several factorsBy Ben WearMarch 9, 2017

Responders works the scene where a train hit a bus in Biloxi, Miss. on Tuesday.Austin American-Statesman

Trains stop in their own time.

Every freight train, every situation, every load is different. The distance it takes to halt a train in an emergency is based on multiple factors: the speed when the brakes are applied, the track’s incline, the number of cars hooked behind the locomotives and the loading of those cars, the “brake delay” inherent in the train’s hydraulic system, the friction-causing metallurgy of the wheels and tracks, the weather.

Article continues below this ad

Even the engineer behind the controls can’t know on any given day how long it would take to stop the train.

“There is no specific rule of thumb on that,” said Greg Udolph, general manager of the Texas State Railroad, a freight and tourist line in East Texas running from Palestine to Rusk. “If the track is wet with dew it changes. Everything that can affect it does. A train takes as long to stop as it takes to stop. Sometimes it can be a mile. Sometimes it’s less, sometime’s it’s more.”

So even when a conductor sees someone far down the track, the train may not be able to stop in time. Federal guidelines tell commercial drivers to immediately evacuate a vehicle that gets stuck on the tracks.

Statesman Logo

Want more Statesman?

Make us a Preferred Source on Google to see more of us when you search.Add Preferred Source

The public doesn’t yet know at what point the CSX Transportation train engineer perceived Tuesday afternoon that the bus stopped up ahead on the tracks in Biloxi, Miss., was not going to move, and decided to hit the emergency brake. The train was going 26 miles per hour when the engineer applied the brakes, investigators with the National Transportation Safety Board said Thursday at a Biloxi briefing. And the freight, running on a long straightaway through the coastal town, had slowed only to 19 mph when it hit the Echo Transportation tour bus high-centered on a hump-shaped crossing.

Article continues below this ad

The train and crumbled bus came to a stop 203 feet down the track, officials said. Four Texas tourists died from that impact. Thirty-five others were hospitalized with injuries.

The train set was of medium size as freights go, with three locomotives and 52 cars behind. It is not known publicly at this point to what degree those cars were loaded. The stopping distance would vary widely, Udolph said, depending on that loading percentage.

Train brakes work off of air pressure, he said. Each car in the line has a pipe running along its undercarriage, and those pipes are connected by hoses where the cars meet. Then, before the train departs, that pipe system is pressured to 90 psi, said Udolph, who was a train engineer earlier in his career.

When an engineer hits the brakes in a normal situation, some of that air bleeds from that pipe into the attached brake cylinders, in turn pushing brake pads against the wheels throughout the train. The pipe pressure might go only from 90 psi to 80 psi, for instance, he said.

Article continues below this ad

“When you put a train into emergency, it drops that pressure from 90 psi to zero,” Udolph said. “Basically, it puts the brakes on as hard as you possibly can.”

Depending on the length of the train, there might be a few second delay between when the engineer hits the emergency brake and all cylinders throughout the train have been pressured up.

“Once you put on the emergency, you just hang on and wait for it to stop,” Udolph said. “You don’t know. Some engineers don’t have to do that their entire career.”

Article continues below this ad

He never had to, never had that moment where human lives were at stake in front of his eyes.

“That is the longest couple of minutes in an engineer’s life,” he said. “I know a lot of engineers who have gone through it. It’s not an easy thing to come back from.”

Ben WearMost Popular1.Who’s challenging Greg Abbott in 2026? Meet Texas governor candidates2.Map: How Austin neighborhoods voted in the US Senate primaries3.Recap: James Talarico wins Texas Democratic nomination for US Senate4.Recap: Austin police release photo of West 6th shooting suspect5.Mercury retrograde is here: What it means and how it affects your zodiac signMore NewsWestlake's title run has been helped by 5-2 freshman PG Peyton HensleSEC women's basketball: Scores, schedule for South Carolina, Texas, LSU and moreBritney Spears arrested on DUI charge in CaliforniaGolden: Don Baylor Neighorbood Park honors Austin baseball legend's legacyCutting violence prevention is costly. Austin's tragedy shows why | EditorialBest OfCommunity's ChoiceThe best bingo halls in AustinYour next favorite game night starts here. Bingo in Austin

Community's ChoiceLooking for better rates? These local credit unions are worth a lookWhen every percentage point counts, these Austin credit unions deliver wins for your wallet.

Community's ChoiceThe best plumbers in Austin, according to local homeownersEven if it’s 2 a.m. or Sunday morning, these plumbers won’t leave you in distress.

Community's ChoiceThe best plastic surgeons in AustinThe community chose these surgeons for results that look real, feel right and last.

Community's ChoiceThe top 5 law firms in Austin you’ll wish you found soonerVoted the best by locals, these Austin law firms have proven results in personal injury, divorce, estate law and more.

Editor's Picks Austin police work at the scene of a mass shooting at Buford’s on West 6th Street on Sunday March 1, 2026.

Local NewsAPD releasing video from deadly West Sixth shooting The statewide gas price average in Texas is $2.87 per gallon. (Photo by Mostafa Bassim/Anadolu via Getty Images)