How Long Does Wood Glue Take To Dry? A Short Answer.

Skip to content

If you are new to woodworking one of the first questions you’ll end up asking yourself, after a trip to your local hardware store, is which of the 20 options for wood glue should you get for your slow, newbie clamping time. There are a lot of choices and what I will try to help you with in this article is to explain wood glue drying times.

To start with, epoxy glue dries instantly once you apply the hardener. With PVA, which is your typical wood glue, you have anywhere from 5 to 20 minutes of assembly time before you need to clamp the piece for the initial set. Most glue will be completely cured in 24 hours and the bond will be stronger than the surrounding wood. Try and avoid any lateral movement of the work that you are gluing up once the surfaces are in contact to prevent weakening the bond.

There are a couple main types of glue that you’ll run across in your woodworking journey which I’ll try to explain in this article to your satisfaction.

We are excited about the new live workshops we will be holding thru Cucamonga Woodworking starting in 2022 and will definitely be talking a lot about glue-ups. You can check it out and register here!

Do You Need Clamps for Wood Glue?

To ensure your project holds together you do need clamps to put sufficient clamp pressure on the joint to allow it to bond properly.

One exception to needing clamps is using hide glue and creating a rubbed joint. This is basically putting the hot hide glue on both surfaces and rubbing them together a couple times until it stops moving. This type of hide glue joint will hold without clamping.

Some alternatives, if you ran out of clamps or don’t have the right type, is to create your own clamping board.

How Long Should Wood Glue Dry Before Removing Clamps?

If a joint you clamped is under stress than you should let the glue fully cure for 24 hours. Joints that are not under stress can be un-clamped in just under an hour. Don’t do anything that will stress the joint for a day because the bond is not fully cured. 

Your weather and climate also should be taken into account. If you are in a cold damp place than glue will take a lot longer to set and cure. Be extra careful and give it some extra time. If you are in a hot and dry environment, like the southwest all summer, than you’ll usually be safer to unclamp your project sooner.

 

Can You Make Wood Glue Dry Faster?

Try using a thin bead of glue, spreading it evenly and thinly on the surface  your gluing up. The old saying of the bigger the blob the better the job is not the right thing for gluing up your work. 

If you are in a hurry to get your glue to dry faster than try a blow dryer or a heat lamp. This will help dry the glue a little quicker but you will still need to let the piece sit for 24 hours to allow the glue to completely cure so the joint doesn’t fall apart in a year or two.

How Strong is Wood Glue?

Typically the bond of fully cured PVA glue, which is the typical white or yellow gorilla glue or titebond or one of the similar glues, is stronger than the surrounding wood. 

Hide Glue is the strongest glue you can get but has the added benefit of being able to take apart with some heat to refinish the piece.

What are the different types of glue?

• Hide Glue which is good for reversibility, color absorption, fast tack, really strong, no creep. traditionally comes as flakes that are mixed with hot water. This type has no additives and is the strongest to use. old brown glue and titebond liquid are liquid forms.
• PVA which is the standard wood glue that you’ll use for joining surfaces. You’ll need to clean off excess glue. Once its dry excess will need to be sanded off because it can’t be colored and other glue won’t attach to it.
• Wood Epoxy is used to fill open spots like knows and other damaged areas. Epoxy is a 2 part glue, is waterproof, and should not be used for structurally important spots.
• Cyanoacrylate is super glue which mostly is used for mounting jigs or other pieces to assist with working the wood like assisting with clamping.
• Polyurethane glue like gorilla glue is waterproof and will stick anything together. 

PVA Glue types and Drying Times

TiteBond III ultimate wood glue exterior use due to waterproof like properties

• open assembly time 8-10 minutes
• total assembly time 20-25 minutes
• required pressure soft 100-150, medium 125-175, hard 175-250
• clean with damp rag while still wet, scrape and sand excess

TiteBond II Premium wood Glue

ideal for exterior use due to highly waterproof

• open assembly time 3-5 minutes
• total assembly time 10-15 minutes
• required pressure soft 100-150, medium 125-175, hard 175-250
• clean with damp rag while still wet, scrape and sand excess

TiteBond Original Wood Glue

industry standard for woodworking with a stronger bond than the wood. Not exterior use or moisture.

• open assembly time 4-6 minutes
• total assembly time 10-15 minutes
• required pressure soft 100-150, medium 125-175, hard 175-250
• clean with damp rag while still wet, scrape and sand excess

TiteBond Genuine Hide Glue

long assembly time, really strong and can be disassembly with moisture. Best for fine furniture repair

• open assembly time 10 minutes
• total assembly time 20-30 minutes
• required pressure soft 100-150, medium 125-175, hard 175-250
• clean with damp rag while still wet, scrape and sand excess

TiteBond Polyurethane glue

waterproof, bond everything, 45 minute cure time, not for structeral apps

• total assembly time 20-30 minutes
• required pressure soft 100-150, medium 125-175, hard 175-250
• clean with mineral spirits

TiteBond Quick and Thick multi-surface glue

thickest fastest drying, not for exterior

• open assenmblt time 3-5 minute
• total assembly time 10-15 minutes
• required pressure soft 100-150, medium 125-175, hard 175-250
• clean with damp cloth, sand or scrape

TiteBond instant bond wood adhesive gel

2 part system for hard to reach and clamp surfaces

• 5 – 15 seconds to set
• 30-60 seconds for initial cure
• 8 hour full cure
• required pressure soft 100-150, medium 125-175, hard 175-250
• acetone to clean

TiteBond II extend 

2 part system for hard to reach and clamp surfaces

• 5 – 15 seconds to set
• 30-60 seconds for initial cure
• 8 hour full cure
• required pressure soft 100-150, medium 125-175, hard 175-250
• acetone to clean

• 187Share on Facebook
• 201Share on Instagram

Recent Posts

link to Can You Sharpen a Chisel on a Bench Grinder?

Most woodworkers have faced the problem of dull chisels. New woodworkers, or those new to working with chisels, face the challenge of sharpening their chisels. Some opt to take their chisels to a...

Continue Reading link to 10 Cool Medieval Woodworking Tools (and What Replaced Them)

If you’ve ever seen a picture or a drawing depicting something from medieval times or perhaps a TV show or movie trying to recreate that era, you may have noticed how much of the architecture and...

Continue Reading

About Me

My name is Kevin and am an ex-submariner turned woodworking hobbyist I've been learning woodworking from some experts for a couple of years and made this website to share some good information with you.

Outdoor Blog

Legal Information

This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are compensated for referring traffic and business to Amazon and other companies linked to on this site.

Kennedy 2024

Learn more at https://kennedy24.com

Donate Here (Link to the official kennedy24 website)

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies. Do not sell my personal information.Cookie settingsACCEPTManage consent Close

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience. Necessary Necessary Always Enabled Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information. Non-necessary Non-necessary Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website. SAVE & ACCEPT

• 187Share on Facebook
• 201Share on Instagram