How Long Should Cakes Rest In Cake Pans?

Cake Central CakeCentral.com is the world's largest cake community for cake decorating professionals and enthusiasts. in Photos in Forum in Blog Post in Recipe in Tutorial levinea Cake Central Cake Decorator Profile

How Long Should Cakes Rest In Cake Pans?

Decorating By levinea Updated 26 May 2008 , 1:28pm by lutie

levinea Cake Central Cake Decorator Profile levinea Posted 25 May 2008 , 4:47pm post #1 of 21

I had some trouble getting the cake out of the large heart cake pan this weekend. It didn't stick to the sides or the bottom, but as soon as I was flipping it on to the cooling rack, it started to crack through the center. Because it was a one layer cake, I just smooshed it back together, but I would have been up a creek if this was a two layer. My mom always said to take cakes out of the pans immediatley and get them on the cooling racks so they don't keep cooking. But maybe that's why my bigger cake cracked? Should I have let it rest in the pan longer? How long can you leave them in there without worrying about them continuing to cook?Or, now that I think about it, is there a better way to get large cakes of the pan?Thanks!

20 replies leily Cake Central Cake Decorator Profile leily Posted 25 May 2008 , 5:08pm post #2 of 21

Did you have a hump on your cake when you flipped it out? If you did that probably caused the crack down the middle.As for flipping I put my cooling rack on top of my cake pan, grab both and flip at the same time. Set cooling rack on counter and then pull my pan off.I don't let my cake sit longer than 10 mins in the pan.

kelleym Cake Central Cake Decorator Profile kelleym Posted 25 May 2008 , 5:50pm post #3 of 21 Quote:Quote:My mom always said to take cakes out of the pans immediatley and get them on the cooling racks so they don't keep cooking. But maybe that's why my bigger cake cracked? Should I have let it rest in the pan longer? How long can you leave them in there without worrying about them continuing to cook?

Cakes are very fragile and volatile when they are fresh out of the oven, and you should never try to turn a cake out of the pan immediately, because it is very likely to crack or break. I always leave them 7-10 minutes in the pan, then flip onto a cooling rack. If there's a hump, I like to saw it off with a serrated knife before I flip - pictures here. icon_biggrin.gif

bisbqueenb Cake Central Cake Decorator Profile bisbqueenb Posted 25 May 2008 , 8:55pm post #4 of 21

My cakes come out of the oven and are turned over immediately onto a rack and the pans removed then turned over again onto a cake board. I do wrap my pans with cold wet towels so have very little humps to deal with but if I get one I just press it down as i turn the cake over.

terrylee Cake Central Cake Decorator Profile terrylee Posted 25 May 2008 , 9:04pm post #5 of 21

I wrap my pans also....It really does help with the hump in the middle.......and I turn my out immediately. I line my pans with wax paper or you can use parchment ( prefer the waxed paper) I flip them out using a towel and flip them back right side up to cool.

JenniferL Cake Central Cake Decorator Profile JenniferL Posted 25 May 2008 , 9:14pm post #6 of 21

After letting my cakes cool for 10 minutes,. As long as a grease and flour my pans well, I don't have any problems with sticking.

vdrsolo Cake Central Cake Decorator Profile vdrsolo Posted 25 May 2008 , 9:14pm post #7 of 21

7-10 minutes here as well. I also line my larger pans with parchment paper...just in case

SweetResults Cake Central Cake Decorator Profile SweetResults Posted 25 May 2008 , 9:30pm post #8 of 21

I do 15 min, not sure why, just always done it that way.

chocolatecake Cake Central Cake Decorator Profile chocolatecake Posted 25 May 2008 , 9:33pm post #9 of 21

Bisbqueenb & TerryLee-At what point of the process do you wrap your pans with cold towels? How does this help prevent a hump?thanks

shisharka Cake Central Cake Decorator Profile shisharka Posted 25 May 2008 , 10:02pm post #10 of 21 Quote:Originally Posted by chocolatecakeBisbqueenb & TerryLee-At what point of the process do you wrap your pans with cold towels? How does this help prevent a hump?thanks

The âhumpâ in the middle is caused by the metal on the sides of the pan heating the batter too fast, so the sides bake before getting a chance to fully rise. The middle heats slower, allowing for a proper rise, this "hump" in the middle and lower, drier sides of the cake. When you wrap the pan with wet towel strips before sticking it in the oven, you effectively even out the cooking temperature of the middle and the sides, thus the cake rises evenly to the level of the usual âhumpâ, even more! Wrap the strip tightly around the pan, secure with paper clip or binder clip to the side, then pour batter in and bake. The towel strip will not burn! This is the most useful technique Iâve learned on CC so far, and I never bake anything larger than 10â without the strips. Just used them on the Wiltonâs ball pan, too, and what a difference!!! There is a commercially available product too, âbake even stripsâ or smth like that, but the reviews it gets are very mixed, so Iâm sticking to my cut-up 100% cotton kitchen towel version⦠On larger cakes, you can put a flower nail in the middle of the pan, which acts as a heating core, also helping the even âhumpâ-less baking. On the original question, I leave cake in the pan for about 5 to 10 min before turning over on a cooling rack - seems to work fine for me.

mandm78 Cake Central Cake Decorator Profile mandm78 Posted 25 May 2008 , 10:08pm post #11 of 21

I always line all my cake pans w/ parchment paper...even the sides. Never had a problem removing them from pans. I usually leave them in cake pans from 15 min. to 1 hour. I guess lined w/ parchment paper it keeps them from sticking. I have even left them to cool slightly and then covered them w/ foil and frozen them directly in the cake pan. Popped right out. I saw on the Food Network not too long ago, some bakery flips their cakes over straight out of the oven. Lets them cool upside down. Helps keep them moist.....I tried that on some of my smaller cakes and I liked the way they came out. Helped them to stay somewhat level too!!! On some of them I put a pan on top to weight them down and help them to stay flat. Just be careful flipping them over.

mbelgard Cake Central Cake Decorator Profile mbelgard Posted 25 May 2008 , 10:11pm post #12 of 21

I level my cakes as soon as they come out and then flip them out right away.

Luby Cake Central Cake Decorator Profile Luby Posted 25 May 2008 , 10:20pm post #13 of 21

I wrap my pans with Magic Baking Strips to bake and turn them out onto the cooling rack as soon as they come out of the oven - never had one crack yet!

tracey1970 Cake Central Cake Decorator Profile tracey1970 Posted 26 May 2008 , 12:10am post #14 of 21

I use the bake even strips, remove them as soon as the cake comes out of the oven, and leave the cake in the pan for 10 minutes before flipping out onto the rack. I've been very successful doing this.

chocolatecake Cake Central Cake Decorator Profile chocolatecake Posted 26 May 2008 , 12:16am post #15 of 21

Thank You shisharka!That is a great tip and 1 I am definitely trying!

Narie Cake Central Cake Decorator Profile Narie Posted 26 May 2008 , 1:03am post #16 of 21

Kelleym has it absolutely correct. Ten minutes gives the cake time to settle before flipping it out. Personally, I set the timer for 10 minutes as soon a cake comes out of the oven so I don't let it set too long.

candycakes51 Cake Central Cake Decorator Profile candycakes51 Posted 26 May 2008 , 2:54am post #17 of 21

I learned the towel trick from my cake decorating teacher many years ago, but she always told us to make sure we wet the towels before putting them on the pans, so I always have. I have also used the strips, but they are expensive and they are no more effective than the towels. I use a serated knife and level my cake even witht the tops of my pans before I ever take them out of the pans, if I need to, but honestly, if you use the towels or strips trick, it is highly unlikely you will have humps. I take my cakes out of the pans immediately and then straight to the freezer and I constantly get compliments on how moist my cakes are. The freezing while they are still steaming seems to help keep them moist and tasty.

lutie Cake Central Cake Decorator Profile lutie Posted 26 May 2008 , 3:09am post #18 of 21

The following is what I usually teach others when I am instructing:For angel food cakes: When baking is done, proper cooling is just as important as baking. The cake is inverted in its pan to cool which prevents its structure from shrinking or falling, which gives angel food cake the open texture that is one of the characteristic of this cake. If placed to cool on a rack, it would deflate much of that hard-earned volume, so it needs to be placed upside down immediately upon removal from the oven. Those angel food cake pans without "handles" to hold the cake up when it has been turned over should be placed upon a bottle (such as a soda bottle or large glass water bottle) and hung in the air until cool.For regular cakes: everyone has their habits, but what works for one may not be what another has chosen. I always follow the recipe instructions to learn whether the cake should be removed from the pans or baking sheets. Make sure you let the cake cool as the recipe instructs, or it will fall apart when you take it out of the pan. They will eventually go onto a rack, but it depends what your recipe says to do. I always taught that cakes usually baked in 9x13" and sheet pans are left in the pan to cool. The pan sides support them and they will retain their texture and structure as they cool. Cakes baked in loaf pans are usually removed from the pan after a brief cooling interval, usually 5-10 minutes.Cakes always should be elevated on a cooling rack so air can circulate around all sides (in or out of the pan); if not, moisture will condense at the bottom of the pan and the cakes will be damp and sticky. For my wedding cakes, I usually let them cool for 10 minutes and then turn them out on my cooling racks. It gives them the time to gather their "strength", so they will not crack and fall to pieces when I remove them from their cozy, little pans. This has worked extremely well for the many plus years I have been baking.You know, I have not had a problem with mounding of the cake in the middle since I have turned down my oven to 325 degrees. The cakes turn out flat and beautiful, without strips. I have a set of them, but could never tell the difference.

levinea Cake Central Cake Decorator Profile levinea Posted 26 May 2008 , 4:00am post #19 of 21

I bake at 325 as well, use a heating core, and rarely get humps on my cake. If I do, I press them down with a clean towel while they're still in the pan.Thanks for the advice, I will try letting them rest 10-15 minutes in the pan rather than the 3-5 minutes they usually get. Hopefully that will help!

indydebi Cake Central Cake Decorator Profile indydebi Posted 26 May 2008 , 4:02am post #20 of 21

My cakes are trimmed while in the pan and flipped out onto cooling racks, all within 2 minutes of coming out of the oven. I grease-only-no-flour the pan, 275 degrees in my shop oven (325 degrees in a home oven), baking strips. No cracking or sticking in the pan. Outer texture of the cakes are gorgeous (if I DO say so myself! icon_rolleyes.gif )

lutie Cake Central Cake Decorator Profile lutie Posted 26 May 2008 , 1:28pm post #21 of 21

One thing I might add: you have left your cakes in the oven too long if they have started to withdraw from the sides. For years, I waited on my cakes to shrink from the sides prior to taking them out, but then I got "smarter" about 3 billion cakes down the road icon_smile.gif When you take your cakes out of the oven just before they start to pull away from the sides they are more moist, compared to the ones I would leave in the oven... plus, I have found by putting a flower nail in, the cakes never mound (large part goes on the bottom... yes, the first time I tried to put it in the other way because I was not thinkingicon_confused.gif ... and what a mess it was trying to right it! Surely none of you have done that stupid of a trick!).Each of our ovens becomes the prima donna in our kitchens... some temperamental and others "conceited". Make sure you test the real temperature of your oven... it will be the difference between grand and great! The last three ovens I have had have all been different temps @ 350 degrees F.

Quote by @%username% on %date%

%body%

About

CakeCentral.com is the world's largest cake community for cake decorating professionals and enthusiasts.
Privacy Policy Terms Of Use

Newsletter Subscribe

Submit

Follow Us On

Contacts

Phone: 866.878.3133 Email: [email protected] 2004 - 2026 © Cake Central Media Corp. All Rights Reserved.

Login to Cake Central

Username / Email Password Wrong username or password Remember me

(if this is a private computer)

Login Forgot Register now for FREE
  • Ask questions in the forums
  • Add your photos, recipes & tutorials
  • Save your favorites
  • Comment on recipes, tutorials and photos
  • Enter Contests and Win Prizes!

Yes please, register now!

Report This to Moderators?

Reason For Report Spam Inappropriate Content Duplicate Other Anything else you want to tell us? Cancel Send Report

Tag » When To Remove Cake From Pan