How To Apply Plumbers Tape: 8 Steps (with Pictures) - WikiHow
Maybe your like
- Log in / Sign up
This article was co-authored by Patrick Johns. Patrick Johns is a Home Improvement Specialist and the Owner of CatchAll Handyman Services. With more than 28 years of experience, he has worked on a variety of home improvement projects, such as carpentry, plumbing, and door and window installations in both commercial and residential properties. There are 9 references cited in this article, which can be found at the bottom of the page. This article has been viewed 48,683 times.
Plumber’s tape is used to seal threaded plumbing connections properly so that there are no leaks. It’s very easy to apply, as long as you follow the correct technique for wrapping it around the threads of a pipe fitting. Make sure you’re using the white variety of plumber’s tape for all types of plumbing applications. There are yellow and green varieties that are meant for gas and oxygen pipes, rather than plumbing connections. Keep a roll of plumber’s tape around your home for quick fixes or to use when you install new plumbing fixtures like shower heads and sinks—you’ll be glad you did!
Steps
Method 1 Method 1 of 2:Sealing Threads with Plumber’s Tape
-
1 Use plumber’s tape to seal male pipe fitting threads. Male pipe fittings are the pieces that screw into another piece, which is called a female pipe fitting. Always put plumber’s tape on the male threads before screwing them into the female threads.[1] - Plumber’s tape is also known as thread seal tape, Teflon tape, and PTFE tape.
- You don’t need to use plumber’s tape on unthreaded joints, which you should use a liquid sealant for. Plumber’s tape is meant specifically for creating a tight seal between threaded plumbing joints.
Tip: If a threaded pipe fitting has a rubber gasket, you don’t need to use plumber’s tape. Just screw the fittings together tight enough to compress the gasket to create a tight seal.
-
2 Pull the end of the tape off the roll. Pick up your roll of plumber’s tape in your dominant hand and find the end of the tape on the roll. Peel up just enough of it that you can easily grab it between your fingers to work with.[2] Advertisement
-
3 Press the end of the tape onto the threads so that the tape will wrap clockwise. Pick up the threaded pipe fitting in your non-dominant hand. Orient the end of the tape so that it faces counterclockwise. Stick the end of the tape firmly onto the threads to get it started.[3]
- For example, hold the pipe fitting horizontally in your left hand with the threads facing your right hand, then position the tape with the end facing down, so you will wrap the tape away from you.
- Wrapping the tape clockwise prevents it from unraveling when you screw the male pipe fitting into a female fitting.
-
4 Wrap the tape tightly around the threads 2-3 complete revolutions. Hold the pipe fitting steady and rotate the hand holding the roll of tape around the threads to wrap them. Pull the tape tight after each full revolution around the pipe fitting.[4]
- You should be able to clearly see the threads after you wrap them. If all you see is tape or you can just barely see the threads, it is not wrapped tightly enough.
-
5 Pull the tape tight to break it and separate the roll from the tape on the pipe. Pinch the tape between the pipe threads and the roll tightly between your fingers. Pull it to stretch and tear the tape. Press any excess tape tightly onto the threads.[5]
- You can now screw the male fitting into its corresponding female piece and it will have a tight seal between the threads.
Advertisement
Using Plumber’s Tape for Specific Applications
-
1 Create a tight seal between water lines and sinks with plumber’s tape.[6] Wrap plumber’s tape 2-3 times around the male threads of all the fittings underneath a newly-installed sink before you attach the water lines. This will ensure a tight seal so there aren’t any leaks when you’re running water from the faucet at high pressure.[7]
- You can also use plumber’s tape to fix leaky connections between water lines and sinks. Shut off the water supply, place a container under the water lines to catch any water in them, and disconnect the lines. Remove any old plumber’s tape and wrap the threads tightly 2-3 times with new plumber’s tape. Reconnect everything and turn on the water supply, then test the faucet.
- Plumber's tape can be used on waterlines provided it's not a copper fitting.[8]
-
2 Apply plumber’s tape to shower head and arm connections to seal them. Shower heads and arms, which are the metal tubes that shower heads attach to, are another area that tend to have problems with leaky connections. Make sure to wrap all the male threads on new shower heads and shower arms 2-3 times with plumber’s tape before screwing them together.[9] [10]
- You can also fix leaky shower heads and arms with plumber’s tape. Just make sure the water is off, then unscrew the shower head and arm and wrap the male threads 2-3 times with plumber’s tape, then screw everything back together and test the shower.
-
3 Use plumber’s tape as a quick temporary fix for leaks in pipes. Wrap plumber’s tape 2-3 times tightly around leaks in the joint where 2 pipes connect or where there is a small crack in a pipe. It will bond to the outside of the pipes and contain the leak for the time being.[11]
- Plumber’s tape should never be used as a permanent fix for leaks. Just patch them up to contain the problem until you can replace the leaky pipes to provide a long-lasting fix.
Tip: It’s a good idea to keep a roll of plumber’s tape around your home for this purpose. That way, if you spot a leak and can’t get a plumber to come over or go buy the supplies to fix it yourself right away, you can contain the leak temporarily.
Advertisement
Expert Q&A
Search Add New Question Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit AdvertisementTips
- Keep a roll of plumber’s tape handy in your home in case you have any plumbing leaks that you can’t fix right away. Thanks Helpful 0 Not Helpful 0
- Make sure you always use white Teflon tape for plumbing applications. Yellow and green Teflon tape are for gas and oxygen tubes. Thanks Helpful 0 Not Helpful 0
- Use plumber’s tape to fix leaky connections in sinks and showers. Thanks Helpful 0 Not Helpful 0
Warnings
- Always wrap plumber’s tape clockwise on the threads, opposite the direction that the male fitting screws into the female piece, otherwise it can unravel when you screw the fittings together. Thanks Helpful 3 Not Helpful 0
You Might Also Like
References
- ↑ https://www.youtube.com/watch?v=65i2vGWi3AE&feature=youtu.be&t=37
- ↑ https://www.youtube.com/watch?v=65i2vGWi3AE&feature=youtu.be&t=62
- ↑ https://www.youtube.com/watch?v=65i2vGWi3AE&feature=youtu.be&t=72
- ↑ https://www.youtube.com/watch?v=65i2vGWi3AE&feature=youtu.be&t=77
- ↑ https://www.thisoldhouse.com/plumbing/21015973/when-to-use-sealants-on-threaded-plumbing-connections
- ↑ Patrick Johns. Home Improvement Specialist. Expert Interview
- ↑ https://www.bobvila.com/articles/how-to-install-a-faucet/
- ↑ Patrick Johns. Home Improvement Specialist. Expert Interview
- ↑ Patrick Johns. Home Improvement Specialist. Expert Interview
- ↑ https://www.apartmenttherapy.com/diy-renters-solutions-replacing-a-shower-head-167798
- ↑ https://www.expressplumbingidaho.com/blog/temporary-leak-fixes/
About This Article
- Send fan mail to authors
Reader Success Stories
-
Eilene P.
Jun 4, 2021
"I just needed to know how many times I should wrap the tape, and I found it here easily. I also inadvertently saw that I should go clockwise. Didn't know that. Thanks."..." more
Did this article help you?
Yes No
Advertisement Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Eilene P.
Jun 4, 2021
"I just needed to know how many times I should wrap the tape, and I found it here easily. I also inadvertently saw that I should go clockwise. Didn't know that. Thanks."..." more Share yours!Quizzes & Games
You Might Also Like
Trending Articles
Watch Articles
Trending Articles
Quizzes & Games
- Categories
- Home and Garden
- DIY
- Plumbing
- Home
- About wikiHow
- Experts
- Jobs
- Contact Us
- Site Map
- Terms of Use
- Privacy Policy
- Do Not Sell or Share My Info
- Not Selling Info
- Contribute
Follow Us
×wikiHow Tech Help Pro:
Level up your tech skills and stay ahead of the curve
Let's go! X --Tag » How To Apply Plumbers Tape
-
How To Use Plumber's Tape - The Spruce
-
How To Apply Teflon Tape The RIGHT Way - YouTube
-
How To Apply Plumber's Tape Correctly - Step By Step - YouTube
-
How To Use PTFE Tape - Ultimate Handyman DIY Tips - YouTube
-
How To Use Teflon Tape: 14 Steps (with Pictures) - WikiHow
-
How To Apply Teflon Tape The RIGHT Way - R.C. Worst & Co.
-
A Complete Guide To PTFE Tape - Singapore - RS Components
-
How To Apply Teflon Tape On Threads | The Best Method
-
DYI Tips For Using Plumber's Tape - Pratt Plumbing
-
Thread Sealant Tape: Where And How To Properly Use It - BoshartU
-
How To Use Teflon Tape - TCH Industries
-
How To Use Plumbers Tape - Kellermeier Plumbing
-
How To Properly Apply Teflon Tape - Tape Jungle
-
Plumbers Tape 101: Everything You Need To Know