How To Bleed Car Brakes (with Pictures) - WikiHow

Home » How To Bleed Your Brakes » How To Bleed Car Brakes (with Pictures) - WikiHow

Maybe your like

Skip to ContentQuizzes
  • Home
  • Random
  • Browse Articles
  • Quizzes & Games
  • All QuizzesHot
  • Love Quizzes
  • Personality Quizzes
  • Fun Games
  • Dating Simulator
  • Learn Something New
  • Forums
  • Courses
  • Happiness Hub
  • Explore More
  • Support wikiHow
  • About wikiHow
  • Log in / Sign up
Terms of Use wikiHow is where trusted research and expert knowledge come together. Learn why people trust wikiHow How to Bleed Car Brakes PDF download Download Article Co-authored by Matthew Rava

Last Updated: February 24, 2025 Approved

PDF download Download Article
  • Preparing to Bleed the Brakes
    • |
  • Bleeding Each of the Car Brake Lines
    • |
  • Tips
    • |
  • Warnings
    • |
  • Things You'll Need
|Show more |Show less X

This article was co-authored by Matthew Rava. Matthew Rava is an Auto Repair Expert and the Co-founder & Head of Marketing of Brakes to You. He specializes in auto repairs that concern brakes. Matthew earned a BS from West Chester University of Pennsylvania. wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 19 testimonials and 95% of readers who voted found it helpful, earning it our reader-approved status. This article has been viewed 915,952 times.

Sometimes, when the brake fluid level drops too low in the master cylinder reservoir, air bubbles can get caught in the lines, reducing the overall strength of the brake fluid column.[1] This creates a “spongy” feeling when you press the brakes.[2] Getting the air out of the brake fluid column will restore the full strength of the hydraulic brakes. However, if your car has ABS (antilock brake system) brakes, you will need to have a professional mechanic bleed the brakes as they will use a special scan tool to cycle the pump and valves.

Steps

Part 1 Part 1 of 2:

Preparing to Bleed the Brakes

PDF download Download Article
  1. Step 1 Remove the top of the master cylinder reservoir. 1 Remove the top of the master cylinder reservoir. It is usually a light-colored reservoir with a black cap in line with your brake pedal in the engine compartment.[3] Consult your manual or a mechanic if you need additional help finding it.
    • During a typical oil change, a mechanic will check the other fluids in your car. Simply ask next time you get an oil change done to find out where the reservoir is.
  2. Step 2 Draw out the old fluid. 2 Draw out the old fluid. Using a clean turkey baster, suck out as much of the old, inky fluid as you can. Collect the old fluid in a jar or bottle that you can later label as old brake fluid. This will ensure only clean fluid gets pumped into the lines while you work.
    • Labeling containers is the safest way to ensure it does not accidentally get used again.
    • Be sure to recycle your old brake fluid. Consult your local government to see where you can drop it off.
    Advertisement
  3. Step 3 Clean the reservoir. 3 Clean the reservoir. After you've gotten all the old brake fluid out, clean any sediment out of the reservoir, if accessible, with a clean, lint-free rag.[4] Don’t let the rag fall completely into the reservoir though, as it will be a nuisance to get back out. Clean up any spilled fluid with a brake cleaner fluid or soap and water.
  4. Step 4 Fill the master cylinder with clean brake fluid. 4 Fill the master cylinder with clean brake fluid. You will be able to see the fill line in or on the reservoir as you fill. You will do this periodically to make sure no air is being pulled in from the reservoir side during the bleeding process. If the fluid gets to about half-full, you need to refill it.[5]
  5. Step 5 Replace the top of the master cylinder reservoir. 5 Replace the top of the master cylinder reservoir. Make sure to put the cap back on the reservoir and tighten to the right after each filling. Negative pressure in the lines during bleeding can cause fluid to shoot out of the reservoir if it is open.
  6. Step 6 Pump the brake pedal about 15 times then hold the brakes with pressure. 6 Pump the brake pedal about 15 times then hold the brakes with pressure. This is simply going to charge the lines with the new brake fluid.[6] [7] It has not yet removed any air in the lines, but it will make sure the pressure is there for when you begin to bleed the lines.
  7. Step 7 Prepare the bleeder valves. 7 Prepare the bleeder valves. Check your car’s manual to find the exact location of the valves. They are typically behind the brake system of each tire, and you may need to remove the tires to get access.
    • Bleeder valves look different for different types of brakes, but they are typically a hex bolt shape with a nozzle-type extension off the front. A web search for your car’s model may help you identify them specifically.
    • Using a box-end wrench (often 5⁄16 inch (7.9 mm)) that fits the bleeder bolt, check that you can loosen the bleeder valves. Leave them closed though.
    • A little oil drizzled or sprayed on the bolts the day before will help to loosen them.[8]
    • If the oil does not help, seek professional help. Breaking a bleeder valve will cause some costly damage.
    • Do not use a crescent wrench. You do not want to strip the valve, rounding the edges to loosen and tighten again.
  8. Step 8 Consult your manual to determine the order of the wheels to bleed. 8 Consult your manual to determine the order of the wheels to bleed. If you cannot find the information in the manual or online, do not fear. Work from the furthest tire from the reservoir to the nearest tire. This makes sure that the air is gradually bled from furthest down the line until there is none left.
    9. Advertisement
Part 2 Part 2 of 2:

Bleeding Each of the Car Brake Lines

PDF download Download Article
  1. Step 1 Jack up... 1 Jack up your car when you’re ready to start. Getting the car off the ground will give you easier access to the bleeder screws. Be especially cautious that the wheels are blocked and on stands before getting underneath the vehicle.[9]
    • After parking on a flat surface and chocking the wheels, use the jack at each tire (making sure they jack is on the frame, not the paneling).
    • Place a jack stand under the frame after lifting each section to keep the car in the air.
    • Have your assistant get into the car now before you get underneath the car. That way if any rocking occurs, you will both be safe.
  2. Step 2 Put a 1 by 4 in (25 by 102 mm) piece of lumber under the brake pedal. 2 Put a 1 by 4 in (25 by 102 mm) piece of lumber under the brake pedal. You can use an alternative spacer, if necessary. This will prevent the pedal from traveling too close to the floor as you begin to bleed the brakes. This is needed so you do not bottom out pistons in the master cylinder and cause internal master cylinder leakage.
  3. Step 3 Hook a tube to the bleeder bolt of the tire furthest from the reservoir. 3 Hook a tube to the bleeder bolt of the tire furthest from the reservoir. Using a piece of clear plastic tubing (aquarium tubing works fine), push one end of the tube over the brake bleeder bolt. It doesn’t have to be a perfect fit, but it will help keep things cleaner if it is.
  4. Step 4 Put the other end of the tube into a jar filled with clean brake fluid. 4 Put the other end of the tube into a jar filled with clean brake fluid. You only need about 2 to 3 inches (51 to 76 mm) of brake fluid in the jar. This will keep air from being sucked back into the brake cylinder or lines. You can also see air bubbles as the air is flushed from the lines.[10]
    • If you do not see air bubbles, don’t worry. They may be dispersing somewhere else. At the very least, you will be clearing the old brake fluid out.
  5. Step 5 Have your helper press and hold the brake. 5 Have your helper press and hold the brake. Call “down” to your assistant who then presses the brake pedal, holds it, and call “down” back. The force should be equivalent to coming to a slow stop at a stop sign.
    • The calling back and forth will ensure you are both certain that the brake is pressed or not when it needs to be.
  6. Step 6 Turn the bleeder bolt to the left one quarter-turn. 6 Turn the bleeder bolt to the left one quarter-turn. Old fluid and air will go down the tubing into the bottle.[11] You will be able to see the trickle down the line and into the jar.
    • Note: Warn your helper that the brake pedal they are pressing down will sink down as you unlock the bleeder bolt a quarter turn. This is perfectly natural, and your helper needs to keep pressure until it stops and hold it down.
  7. Step 7 Close the bleeder valve when the trickling stops. 7 Close the bleeder valve when the trickling stops. Just like you opened it, but in reverse, turn the valve a quarter turn to the right. Closing the valve now ensures that while the pressure is pushing outward, nothing is going to be sucked back into the line when the brake is released.[12]
  8. Step 8 Ask your helper to release the brake. 8 Ask your helper to release the brake. Call "up" to your helper, who now will lift off the brake and call “up” back to you. This completes one cycle of bleeding that particular line. Your brakes are a little closer to being cleared and clean.
    • It can take up to 8 or 10 cycles to fully clear the line, especially for the further away tires.
  9. Step 9 Repeat this process until new, clear fluid comes from the bleeder tube. 9 Repeat this process until new, clear fluid comes from the bleeder tube. After every 5 or 6 times through the cycle, top off the master cylinder reservoir with fresh fluid.[13] Never let the reservoir get too low, or air will be sucked into the master cylinder.
  10. Step 10 Repeat the process on the other brakes. 10 Repeat the process on the other brakes. Move to the next furthest wheel from the reservoir and repeat the process with your partner.[14] Be sure to bleed the brakes at all 4 tires. If you only do a few, you may only move the air bubbles to a different line or section.
    11. Advertisement

Expert Q&A

Search Add New Question Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

Tips

  • Some later model vehicles call for a special bleed procedure known as a "Bleeding Sequence" due to the various valves and systems used. Consult a professional first before attempting to bleed as problems and/or damage to your brake system can happen if improperly bled. Thanks Helpful 1 Not Helpful 1
  • Always start from the furthest of the master brake cylinder. Usually, it's back right to back left, then front right to front left. Thanks Helpful 2 Not Helpful 0
  • Bleeder bolts can become difficult to remove. Use a proper-fitting box wrench to keep from rounding them off. Thanks Helpful 1 Not Helpful 0
Show More Tips Submit a Tip All tip submissions are carefully reviewed before being published Name Please provide your name and last initial Submit Thanks for submitting a tip for review! Advertisement

Warnings

  • Doing this alone is not recommended, air can be sucked in around the threads of the bleeder valve! If a pressure bleeder is used, then bleeding can be done by one person. Thanks Helpful 5 Not Helpful 1
  • Brake fluid will destroy the paint on your car. Take care not to spill it on paint. Thanks Helpful 4 Not Helpful 1
  • Always use the manufacturer's recommended brake fluid for your car. Using the wrong fluid (like engine oil) can result in brake failure and/or expensive repairs. Thanks Helpful 5 Not Helpful 2
Advertisement

Things You'll Need

  • Box wrench
  • Clear plastic tubing
  • 2 or 3 8-oz (230 mL) cans of brake fluid
  • Turkey baster
  • Clear plastic bottle or jar
  • Spacer (i.e. a 1 by 4 in (25 by 102 mm) piece of lumber)
  • Another person to be your helper
  • Scan tool for ABS or Traction control

You Might Also Like

Bleed Brake LinesHow toBleed Brake Lines Get Air Out of Brake Lines Without BleedingAir in Your Brake Lines: Why They Need to Be Bled & 4 Common Methods Bleed a Master CylinderHow toBleed a Master Cylinder Refill Brake FluidHow toRefill Brake Fluid Bleed a Slave CylinderHow toBleed a Slave Cylinder Fix a Brake Fluid LeakHow toFix a Brake Fluid Leak Replace a Master CylinderHow toReplace a Master Cylinder Brake Fluid FlushThe Best Way to Flush the Brake Lines on Your Vehicle Change The Brake Pads in Your CarHow toChange The Brake Pads in Your Car Change Brake LinesHow toChange Brake Lines Bleed Power SteeringHow toBleed Power Steering Troubleshoot Your BrakesHow toTroubleshoot Your Brakes Service BrakesHow toService Brakes Bleed Cooling SystemHow to Bleed Your Vehicle's Coolant Lines Advertisement

References

  1. ↑ http://www.popularmechanics.com/cars/how-to/maintenance/4213448
  2. ↑ Matthew Rava. Auto Repair Expert. Expert Interview
  3. ↑ Matthew Rava. Auto Repair Expert. Expert Interview
  4. ↑ https://www.howacarworks.com/brakes/bleeding-the-brakes
  5. ↑ https://www.dummies.com/home-garden/car-repair/brakes-bearings/how-to-bleed-your-brakes/
  6. ↑ Matthew Rava. Auto Repair Expert. Expert Interview
  7. ↑ https://www.dummies.com/home-garden/car-repair/brakes-bearings/how-to-bleed-your-brakes/
  8. ↑ https://www.caranddriver.com/features/a15125166/how-to-bleed-your-brakes/
  9. ↑ https://www.howacarworks.com/brakes/bleeding-the-brakes
More References (5)
  1. ↑ https://www.howacarworks.com/brakes/bleeding-the-brakes
  2. ↑ https://www.howacarworks.com/brakes/bleeding-the-brakes
  3. ↑ https://www.dummies.com/home-garden/car-repair/brakes-bearings/how-to-bleed-your-brakes/
  4. ↑ https://www.dummies.com/home-garden/car-repair/brakes-bearings/how-to-bleed-your-brakes/
  5. ↑ Matthew Rava. Auto Repair Expert. Expert Interview

About This Article

Matthew Rava Co-authored by: Matthew Rava Auto Repair Expert This article was co-authored by Matthew Rava. Matthew Rava is an Auto Repair Expert and the Co-founder & Head of Marketing of Brakes to You. He specializes in auto repairs that concern brakes. Matthew earned a BS from West Chester University of Pennsylvania. This article has been viewed 915,952 times. 20 votes - 95% Co-authors: 37 Updated: February 24, 2025 Views: 915,952 Categories: Car Brakes Article SummaryX

To bleed car brakes, suck the old brake fluid out with a turkey baster and refill it with new fluid. Loosen the bleeder valves and attach plastic tubing to the bleeder bolt, placing the other end into a bottle filled with 1-2 inches of brake fluid. Depress the brake pedal and turn the bolt slightly to the left so the old fluid can drain through the tubing into the bottle. When the fluid stops, close the valve and repeat the process until new, clear fluid comes from the tube. For tips on keeping the master cylinder reservoir filled with fluid as you bleed the brakes, read on! Did this summary help you?YesNo

In other languages Spanish German French Italian Russian Portuguese Dutch Korean Hindi Japanese
  • Print
  • Send fan mail to authors
Thanks to all authors for creating a page that has been read 915,952 times.

Reader Success Stories

  • Teo Braga

    Teo Braga

    Sep 4, 2017

    "This was very helpful, I didn't know that you had to start with the furthest wheel first, to bleed your..." more
More reader stories Hide reader stories Share your story

Did this article help you?

Yes No Advertisement Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Matthew Rava Co-authored by: Matthew Rava Auto Repair Expert Co-authors: 37 Updated: February 24, 2025 Views: 915,952 95% of readers found this article helpful. 20 votes - 95% Click a star to add your vote Teo Braga

Teo Braga

Sep 4, 2017

"This was very helpful, I didn't know that you had to start with the furthest wheel first, to bleed your..." more John Jones

John Jones

Sep 24, 2019

"I am not an idiot, but I am wary about going beyond my technical ability. This article gave me the total confidence..." more Joseph Hill

Joseph Hill

Sep 5, 2017

"This article helped me out very well and I never knew how easy it was to fix cars .That's why all the..." more Cory Robertson

Cory Robertson

Jun 11, 2017

"This was very helpful, I love working on cars, and even though I've done this process many times before,..." more Will Burke

Will Burke

Mar 6, 2017

"I replaced a brake caliper and the brake was not normal, so I thought the brakes needs to be bleed. Your..." more Share yours! More success stories Hide success stories

Quizzes & Games

Finish the Phrase QuizFinish the Phrase QuizTake QuizWhat Chakra Do I Need to Balance QuizWhat Chakra Do I Need to Balance QuizTake QuizHow Good Are My Survival Instincts QuizHow Good Are My Survival Instincts QuizTake QuizAnger Issues TestAnger Issues TestTake QuizWhat Makeup Should I Wear QuizWhat Makeup Should I Wear QuizTake QuizWhat Are The Best Compression Socks For Me QuizWhat Are The Best Compression Socks For Me QuizTake Quiz

You Might Also Like

Bleed Brake LinesHow toBleed Brake LinesGet Air Out of Brake Lines Without BleedingAir in Your Brake Lines: Why They Need to Be Bled & 4 Common MethodsBleed a Master CylinderHow toBleed a Master CylinderRefill Brake FluidHow toRefill Brake Fluid

Trending Articles

Am I Good at Flirting QuizAm I Good at Flirting QuizHow Sexual Am I QuizHow Sexual Am I QuizHow Many Secret Admirers Do I Have QuizHow Many Secret Admirers Do I Have QuizRank My Attractiveness QuizRank My Attractiveness Quiz5 Different Types of Butts: Find Your Shape5 Different Types of Butts: Find Your ShapeWhat Would My Nickname Be QuizWhat Would My Nickname Be Quiz

Watch Articles

Impress a Girl on a First DateHow toImpress a Girl on a First DateWhat Are Tear Burns on TikTok and What Causes Them?What Are Tear Burns on TikTok and What Causes Them?Wear a HoodieHow toWear a HoodieChiffonadeHow toChiffonadeMake a Fabric RoseHow toMake a Fabric RoseConfront a BullyHow toConfront a Bully

Trending Articles

What Is My Intelligence Type QuizWhat Is My Intelligence Type Quiz210+ Shower Thoughts: Funny, Deep, Weird & Mind-Blowing210+ Shower Thoughts: Funny, Deep, Weird & Mind-BlowingTell That Your Crush Likes You BackHow toTell That Your Crush Likes You BackDepression Test for TeensDepression Test for TeensSCP Fight Simulator: Who Will Win?SCP Fight Simulator: Who Will Win?Am I Autistic QuizAm I Autistic Quiz

Quizzes & Games

What Skin Type Do I Have QuizWhat Skin Type Do I Have QuizTake QuizAm I a Good Kisser QuizAm I a Good Kisser QuizTake QuizWhat Kind of Reality Check Do I Need QuizWhat Kind of Reality Check Do I Need QuizTake QuizAm I Smart QuizAm I Smart QuizTake QuizWhy Am I So Bloated QuizWhy Am I So Bloated QuizTake QuizWhat Type of Brain Do I Have QuizWhat Type of Brain Do I Have QuizTake Quiz wikiHow
  • Categories
  • Cars & Other Vehicles
  • Cars
  • Car Maintenance and Repair
  • Car Brakes
wikiHow Newsletter You're all set! Helpful how-tos delivered toyour inbox every week! Sign me up! By signing up you are agreeing to receive emails according to our privacy policy.
  • Home
  • About wikiHow
  • Experts
  • Jobs
  • Contact Us
  • Site Map
  • Terms of Use
  • Privacy Policy
  • Do Not Sell or Share My Info
  • Not Selling Info
  • Contribute

Follow Us

×

wikiHow Tech Help Pro:

Develop the tech skills you need for work and life

Let's do this! X --559

Tag » How To Bleed Your Brakes