How To Change Drill Bits In The Ridgid Brand - EHow

Home » How To Change Bit In Drill » How To Change Drill Bits In The Ridgid Brand - EHow

Maybe your like

Share
  1. Home Sweet Home
  2. Carpentry & Remodeling
How to Change Drill Bits in the Ridgid Brand By Tom Price eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

When drilling a hole with a Ridgid brand drill press, it is imperative that the operator use the proper drillbit. It is possible to ruin an entire project by drilling an incorrect-sized hole. In order to drill the hole to the correct diameter, the drill press operator needs to understand how to change a bit in the Ridgid brand drill press. The procedure is relatively easy to master and only takes a matter of seconds.

Advertisement

Step 1

Unplug the Ridgid brand drill press.

Video of the Day

Step 2

Remove the chuck key from the chuck key holder located on the right side of the drill press just above the chuck.

Step 3

Insert the chuck key into the chuck of the drill press, ensuring that the teeth on the chuck key mesh with the teeth on the drill press chuck. Turn the chuck key counterclockwise to loosen the chuck and release the bit.

Advertisement

Related Stories

Home Sweet Home How to Connect Roof to Concrete Block Wall Home Sweet Home How do I Move a Shower Drain to the Center for Installation? Home Sweet Home Step-by-Step Plans on How to Build a Deck

Step 4

Remove the bit and replace it with the desired drill bit. Ensure that the shank of the new drill bit is in the drill chuck straight and as far as it can go. Rotate the chuck key clockwise until the chuck closes around the new drill bit. Return the chuck key to the chuck key holder and plug the drill press into a power source, completing the changing of drill bit in the Ridgid brand drill press.

Tip

Always read and follow the directions that come with power tools.

Warning

Drill bits are sharp objects. Wear gloves to protect hands while handling drill bits.

Video of the Day

Advertisement

references
  • tamu-commerce.edu; Ridgid Operators Manual; 15 in. Drill Press; DP 15501
eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

you may like

1
How to Install Bathroom Wall Paneling
2
How to Build a Fire Pit With Landscape Wall Stones
3
How to Recycle Countertops

You May Also Like

1
How to Cut Church Pews
2
How to Use a Brad Nailer on Engineered Hardwood
3
How do I Cut a Hole Through a Hardwood Floor for Crawl Space Access?

Tag » How To Change Bit In Drill