How To Change The Oil On A Troy-Bilt Walk Behind Mower

Maybe your like

Skip to Main Content Contact Us for support on 1-800-668-1238

Knowledge Centre
Lawn Care
Walk-Behind Mower

How to Change the Oil on a Troy-Bilt Walk Behind Mower How to Change the Oil on a Troy-Bilt Walk Behind Mower

This video will show you how to change the oil on the Troy-Bilt walk behind mower. Depending on your model, the instructions in this video may vary slightly. Always be sure to check your operator's manual for detailed instructions.

Instructions

Step 1: Remove the spark plug ignition wire.
Step 2: Remove the dip stick.
Step 3: Using the Arnold Siphon Pump, place the orange tube into the dip stick hole on the engine, and the black tube into the oil pan.
Step 4: Prime the pump by pumping the handle three to four times. Once the liquid begins to flow, it will flow without further pumping.
Step 5: Remove the orange tube and add new oil as instructed in your operator's manual.
Step 6: Replace the dip stick.
Step 7: Replace the spark plug ignition wire.
Step 8: Dispose of oil properly