How To Choose The Best Size Pulls For Your Cabinets Drawers

How To Choose The Best Size Pulls For Your Cabinets Drawers Home / Articles and Advice Previous / Next

4 min read

Ultimate Guide: How to Choose Cabinet Pull Sizes for Kitchen Drawers

Shop cabinet pulls by the most common drawer sizes

Already know what you need? Jump straight to the most popular hole spacings and finishes.

Smaller drawers 96mm pulls Great universal “small” size Most popular 128mm pulls The classic go-to size Wide drawers Long bar pulls 10"+ lengths for big drawers Need guidance? Use the quick chart Rules of thumb by drawer width

Not sure how to measure? Start here: How to Measure Cabinet Pulls.

In this guide:

• What counts as a drawer?
• The 1/3 guideline
• Two sizing strategies
• Wide/oversized drawers
• Quick size helper
• FAQ

First, What Are Cabinet Drawers?

A cabinet drawer is a box that slides in and out of the cabinet. The handle mounts to the drawer front (the visible face). The width of this front determines pull size.

Shortcut: If you want one “safe” size that looks great on most drawers, start with 128mm pulls. Prefer smaller? Try 96mm pulls.

Are All Kitchen Drawers the Same Size?

No. Most kitchens mix narrow utensil drawers with wider pots-and-pans drawers. Expect variety—even within one run of cabinets.

Do drawers always get a pull? Generally yes—pulls make drawers easier to open than knobs, especially on wider/heavier drawers.

The 1/3 Guideline (Your Easy Starting Point)

Great hardware sizing is about proportion, balance, and scale. A simple rule of thumb: choose a pull with an overall length ≈ one-third the drawer width.

It’s a guide, not a law. If the exact 1/3 size isn’t available, pick the closest standard length that looks right to you.

Popular pull sizes (fast links)

3-3/4" 96mm 5" 128mm Long bar pulls

Design for overall length, drill using CTC (center-to-center).

Two Ways to Size Pulls Across Your Kitchen

Option 1 — Keep All Pulls the Same Size

Choose one size that looks balanced on most drawers and use it everywhere.

• Typical sizes: 3" to 5" center-to-center (≈ 4"–7½" overall length).
• Why it works: Creates a cohesive, low-stress look and simplifies ordering/installation.

Want the simplest approach?

Pick one size and use it everywhere. Two best sellers:

Shop 128mm Shop 96mm

Want a more “custom” look?

Scale sizes up on wide drawers using the 1/3 guideline.

See wide drawer options

Option 2 — Vary Pull Size by Drawer Width

Use the 1/3 guideline to scale pulls up for wider drawers and down for narrower ones.

How to Handle Wide or Oversized Drawers (≈36" and up)

For long, heavy drawers you have three attractive options:

Option A — One Long Pull (Using the 1/3 Guideline)

Often 10"+ overall length. European bar pulls shine here because they’re offered in extended lengths.

Shopping tip: For 36"+ drawers, most people prefer a long bar pull. Browse European bar pulls for the widest range of long sizes.

Option B — Two Pulls on One Drawer

Great for very heavy drawers. Divide the visual span and the weight you’re pulling.

• Sizing tip: Halve the drawer width to find the visual span of each side, then apply the 1/3 guideline to each half.

Option C — One Smaller Pull (Ignore the 1/3 Guideline)

For a consistent, minimalist look, keep the same pull size on every drawer—even the wide ones.

Quick Size Helper (Rules of Thumb)

• 12–18" wide drawer: 3"–4" CTC (≈4"–5½" overall)
• 18–24" wide drawer: 4"–5" CTC (≈5½"–7½" overall)
• 24–30" wide drawer: 6"–8" overall (or two smaller pulls)
• 30–36"+ wide drawer: 10"+ overall, or two pulls

CTC = Center-to-center hole spacing. Always verify the manufacturer’s overall length vs. CTC before drilling.

Need measuring help? See our quick measuring guide.

Shop 96mm Shop 128mm Shop long pulls

Wrap Up

Use the 1/3 guideline as your starting point, then choose either a single consistent size or scale pulls to each drawer. In the end, go with what looks proportional to you—and fits how you use the space.

Questions? Email [email protected], text 704-946-7735, or chat with us live. Free shipping over $39, easy samples and returns—thank you for supporting a small family business!

FAQ: Drawer Pull Sizing

Does the 1/3 guideline always work?

It’s a starting point. Pick the closest available size that looks proportional in your kitchen’s lighting and context.

Should I mix sizes or keep them the same?

Both look great. Same size = unified, simple. Mixed sizes = tailored to each drawer for perfect scale.

What about very heavy pot drawers?

Use one long pull or two pulls for leverage. Two pulls split the load and can be easier to grip.

Do I size by overall length or center-to-center?

Design to overall length for proportion; drill using the manufacturer’s center-to-center (CTC) measurement.

Explore more Articles & Advice

Browse cabinet hardware guides, finish comparisons, sizing tips, and installation how-tos.

View all posts

Other Articles You Might Like

Also in Articles and Advice

Door Knobs and Door Lever Functions

8 min read

Choosing the right door hardware isn’t just about style—it’s about function. This guide explains the differences between keyed entry, privacy, passage, and dummy door knobs and levers, plus deadbolts and front door handlesets, so you can confidently choose the correct lock for every door in your home.

Read More

How Canadian Customers Can Easily Order from Doorcorner.com Using Shippsy

3 min read

Canadian customers can now easily shop Doorcorner.com usin Shippsy, a simple cross-border forwarding service. Learn how to order your favorite Cosmas cabinet hardware and Harmon wall plates from Canada with fast, affordable delivery—no international checkout required.

Read More

The Unsung Hero of Home Design: The Wall Plate

3 min read

This guide breaks down why metal wall plates are a smart upgrade for any home — they’re stronger, safer, and better looking than plastic. Learn how to match or coordinate finishes with your backsplash, cabinets, and lighting for a polished, cohesive design.

Read More Search