How To Clean A Fuel Filter - It Still Runs

How to Clean a Fuel Filter by Cassandra Tribe Max Boost Co. UK

Your fuel filter is designed to prevent impurities in the gas, or from an older gas tank, from reaching your engine. The smallest impurity can clog a fuel injection line or carburetor, and learning how to clean a fuel filter will keep your car functioning at its best. While this is a very simple job to do, you must exercise extreme caution because of the gas that is in the lines to the filter.

Step 1

Starting at the fuel line as it comes into your fuel injector or carburetor, trace the fuel line back to find the fuel filter. It will be a small metal or plastic canister placed into the line.

Step 2

Screw the hose clamps onto the fuel line 4 inches away from the filter on both the entrance and exit hose. Tighten the hose clamps with a flat-head screwdriver as far as you can go; close the hose with the clamps to prevent gasoline from spraying.

Step 3

Place a jar under the fuel filter and unscrew the hose clamps that attach the hose to the filter. As you loosen the clamps, pull the hose off the filter and let any excess gas dump into the jar. When the filter is free of the hoses, empty any gas inside the filter into the jar as well.

Step 4

Hold the filter so one of the ends is pointed into the jar. Attach the small red straw that comes with your can of B-12 Chem Tool to the spray nozzle, insert the other end of the straw into the fuel filter, and spray. Let the spray and whatever comes out fall into the jar. Repeat this from both ends.

Step 5

Gently tap the fuel filter against a hard surface, or turn the screwdriver around and tap the filter with the handle of the screwdriver. Tap all around the surface.

Step 6

Blast the filter again with the B-12 Chem Tool Spray. Set the filter aside and allow it to dry for an hour. You can now re-attach your fuel filter to the fuel lines; make sure that the flow arrow on your filter is pointed towards the engine when you do so.

References

• smallest impurity can clog a fuel injection line

Tips

• Fuel filters are one of the most important yet most affordable parts of a car to replace. If you do not feel confident that you have sufficiently cleaned your fuel filter, buy a replacement.

Things You'll Need

• Hose clamps Flat-head screwdriver Jar B-12 Chem Tool Cleaner Spray

Warnings

• When removing the fuel filter from the fuel lines, wear gloves and safety glasses to protect yourself from any possible gasoline spray. If gasoline comes in contact with your skin, wash the area immediately. If gas gets into your eyes, seek medical attention.

Writer Bio

Cassandra Tribe has worked in the construction field for over 17 years and has experience in a variety of mechanical, scientific, automotive and mathematical forms. She has been writing and editing for over 10 years. Her areas of interest include culture and society, automotive, computers, business, the Internet, science and structural engineering and implementation.

More Articles

How to Check a Fuel Filter How to Change the Fuel Filter on a John ... How to Change a Detroit Diesel Fuel ... How to Replace a Fuel Filter on a ... How to Replace a Fuel Filter in a Ford ... How to Change the Cabin Filter on a ... How to Clean a Banks Turbo Air Filter How to Prime a Fuel Filter How to Replace a Fuel Filter in a Ford ... ×