The k-fold cross-validation procedure is a standard method for estimating the performance of a machine learning algorithm on a dataset.
A common value for k is 10, although how do we know that this configuration is appropriate for our dataset and our algorithms?
One approach is to explore the effect of different k values on the estimate of model performance and compare this to an ideal test condition. This can help to choose an appropriate value for k.
Once a k-value is chosen, it can be used to evaluate a suite of different algorithms on the dataset and the distribution of results can be compared to an evaluation of the same algorithms using an ideal test condition to see if they are highly correlated or not. If correlated, it confirms the chosen configuration is a robust approximation for the ideal test condition.
In this tutorial, you will discover how to configure and evaluate configurations of k-fold cross-validation.
After completing this tutorial, you will know:
How to evaluate a machine learning algorithm using k-fold cross-validation on a dataset.
How to perform a sensitivity analysis of k-values for k-fold cross-validation.
How to calculate the correlation between a cross-validation test harness and an ideal test condition.
Kick-start your project with my new book Machine Learning Mastery With Python, including step-by-step tutorials and the Python source code files for all examples.
Let’s get started.
How to Configure k-Fold Cross-ValidationPhoto by Patricia Farrell, some rights reserved.
Tutorial Overview
This tutorial is divided into three parts; they are:
k-Fold Cross-Validation
Sensitivity Analysis for k
Correlation of Test Harness With Target
k-Fold Cross-Validation
It is common to evaluate machine learning models on a dataset using k-fold cross-validation.
The k-fold cross-validation procedure divides a limited dataset into k non-overlapping folds. Each of the k folds is given an opportunity to be used as a held-back test set, whilst all other folds collectively are used as a training dataset. A total of k models are fit and evaluated on the k hold-out test sets and the mean performance is reported.
For more on the k-fold cross-validation procedure, see the tutorial:
A Gentle Introduction to k-fold Cross-Validation
The k-fold cross-validation procedure can be implemented easily using the scikit-learn machine learning library.
First, let’s define a synthetic classification dataset that we can use as the basis of this tutorial.
The make_classification() function can be used to create a synthetic binary classification dataset. We will configure it to generate 100 samples each with 20 input features, 15 of which contribute to the target variable.
The example below creates and summarizes the dataset.
# test classification dataset from sklearn.datasets import make_classification # define dataset X, y = make_classification(n_samples=100, n_features=20, n_informative=15, n_redundant=5, random_state=1) # summarize the dataset print(X.shape, y.shape)
123456
# test classification datasetfrom sklearn.datasets import make_classification# define datasetX,y=make_classification(n_samples=100,n_features=20,n_informative=15,n_redundant=5,random_state=1)# summarize the datasetprint(X.shape,y.shape)
Running the example creates the dataset and confirms that it contains 100 samples and 10 input variables.
The fixed seed for the pseudorandom number generator ensures that we get the same samples each time the dataset is generated.
(100, 20) (100,)
1
(100, 20) (100,)
Next, we can evaluate a model on this dataset using k-fold cross-validation.
We will evaluate a LogisticRegression model and use the KFold class to perform the cross-validation, configured to shuffle the dataset and set k=10, a popular default.
The cross_val_score() function will be used to perform the evaluation, taking the dataset and cross-validation configuration and returning a list of scores calculated for each fold.
The complete example is listed below.
# evaluate a logistic regression model using k-fold cross-validation from numpy import mean from numpy import std from sklearn.datasets import make_classification from sklearn.model_selection import KFold from sklearn.model_selection import cross_val_score from sklearn.linear_model import LogisticRegression # create dataset X, y = make_classification(n_samples=100, n_features=20, n_informative=15, n_redundant=5, random_state=1) # prepare the cross-validation procedure cv = KFold(n_splits=10, random_state=1, shuffle=True) # create model model = LogisticRegression() # evaluate model scores = cross_val_score(model, X, y, scoring='accuracy', cv=cv, n_jobs=-1) # report performance print('Accuracy: %.3f (%.3f)' % (mean(scores), std(scores)))
Running the example creates the dataset, then evaluates a logistic regression model on it using 10-fold cross-validation. The mean classification accuracy on the dataset is then reported.
Note: Your results may vary given the stochastic nature of the algorithm or evaluation procedure, or differences in numerical precision. Consider running the example a few times and compare the average outcome.
In this case, we can see that the model achieved an estimated classification accuracy of about 85.0 percent.
Accuracy: 0.850 (0.128)
1
Accuracy: 0.850 (0.128)
Now that we are familiar with k-fold cross-validation, let’s look at how we might configure the procedure.
Sensitivity Analysis for k
The key configuration parameter for k-fold cross-validation is k that defines the number folds in which to split a given dataset.
Common values are k=3, k=5, and k=10, and by far the most popular value used in applied machine learning to evaluate models is k=10. The reason for this is studies were performed and k=10 was found to provide good trade-off of low computational cost and low bias in an estimate of model performance.
How do we know what value of k to use when evaluating models on our own dataset?
You can choose k=10, but how do you know this makes sense for your dataset?
One approach to answering this question is to perform a sensitivity analysis for different k values. That is, evaluate the performance of the same model on the same dataset with different values of k and see how they compare.
The expectation is that low values of k will result in a noisy estimate of model performance and large values of k will result in a less noisy estimate of model performance.
But noisy compared to what?
We don’t know the true performance of the model when making predictions on new/unseen data, as we don’t have access to new/unseen data. If we did, we would make use of it in the evaluation of the model.
Nevertheless, we can choose a test condition that represents an “ideal” or as-best-as-we-can-achieve “ideal” estimate of model performance.
One approach would be to train the model on all available data and estimate the performance on a separate large and representative hold-out dataset. The performance on this hold-out dataset would represent the “true” performance of the model and any cross-validation performances on the training dataset would represent an estimate of this score.
This is rarely possible as we often do not have enough data to hold some back and use it as a test set. Kaggle machine learning competitions are one exception to this, where we do have a hold-out test set, a sample of which is evaluated via submissions.
Instead, we can simulate this case using the leave-one-out cross-validation (LOOCV), a computationally expensive version of cross-validation where k=N, and N is the total number of examples in the training dataset. That is, each sample in the training set is given an example to be used alone as the test evaluation dataset. It is rarely used for large datasets as it is computationally expensive, although it can provide a good estimate of model performance given the available data.
We can then compare the mean classification accuracy for different k values to the mean classification accuracy from LOOCV on the same dataset. The difference between the scores provides a rough proxy for how well a k value approximates the ideal model evaluation test condition.
Let’s explore how to implement a sensitivity analysis of k-fold cross-validation.
First, let’s define a function to create the dataset. This allows you to change the dataset to your own if you desire.
# create the dataset def get_dataset(n_samples=100): X, y = make_classification(n_samples=n_samples, n_features=20, n_informative=15, n_redundant=5, random_state=1) return X, y
1234
# create the datasetdef get_dataset(n_samples=100):X,y=make_classification(n_samples=n_samples,n_features=20,n_informative=15,n_redundant=5,random_state=1)returnX,y
Next, we can define a dataset to create the model to evaluate.
Again, this separation allows you to change the model to your own if you desire.
# retrieve the model to be evaluate def get_model(): model = LogisticRegression() return model
1234
# retrieve the model to be evaluatedef get_model():model=LogisticRegression()returnmodel
Next, you can define a function to evaluate the model on the dataset given a test condition. The test condition could be an instance of the KFold configured with a given k-value, or it could be an instance of LeaveOneOut that represents our ideal test condition.
The function returns the mean classification accuracy as well as the min and max accuracy from the folds. We can use the min and max to summarize the distribution of scores.
# evaluate the model using a given test condition def evaluate_model(cv): # get the dataset X, y = get_dataset() # get the model model = get_model() # evaluate the model scores = cross_val_score(model, X, y, scoring='accuracy', cv=cv, n_jobs=-1) # return scores return mean(scores), scores.min(), scores.max()
12345678910
# evaluate the model using a given test conditiondef evaluate_model(cv):# get the datasetX,y=get_dataset()# get the modelmodel=get_model()# evaluate the modelscores=cross_val_score(model,X,y,scoring='accuracy',cv=cv,n_jobs=-1)# return scoresreturnmean(scores),scores.min(),scores.max()
Next, we can calculate the model performance using the LOOCV procedure.
... # calculate the ideal test condition ideal, _, _ = evaluate_model(LeaveOneOut()) print('Ideal: %.3f' % ideal)
1234
...# calculate the ideal test conditionideal,_,_=evaluate_model(LeaveOneOut())print('Ideal: %.3f'%ideal)
We can then define the k values to evaluate. In this case, we will test values between 2 and 30.
... # define folds to test folds = range(2,31)
123
...# define folds to testfolds=range(2,31)
We can then evaluate each value in turn and store the results as we go.
... # record mean and min/max of each set of results means, mins, maxs = list(),list(),list() # evaluate each k value for k in folds: # define the test condition cv = KFold(n_splits=k, shuffle=True, random_state=1) # evaluate k value k_mean, k_min, k_max = evaluate_model(cv) # report performance print('> folds=%d, accuracy=%.3f (%.3f,%.3f)' % (k, k_mean, k_min, k_max)) # store mean accuracy means.append(k_mean) # store min and max relative to the mean mins.append(k_mean - k_min) maxs.append(k_max - k_mean)
12345678910111213141516
...# record mean and min/max of each set of resultsmeans,mins,maxs=list(),list(),list()# evaluate each k valueforkinfolds:# define the test conditioncv=KFold(n_splits=k,shuffle=True,random_state=1)# evaluate k valuek_mean,k_min,k_max=evaluate_model(cv)# report performanceprint('> folds=%d, accuracy=%.3f (%.3f,%.3f)'%(k,k_mean,k_min,k_max))# store mean accuracymeans.append(k_mean)# store min and max relative to the meanmins.append(k_mean-k_min)maxs.append(k_max-k_mean)
Finally, we can plot the results for interpretation.
... # line plot of k mean values with min/max error bars pyplot.errorbar(folds, means, yerr=[mins, maxs], fmt='o') # plot the ideal case in a separate color pyplot.plot(folds, [ideal for _ in range(len(folds))], color='r') # show the plot pyplot.show()
1234567
...# line plot of k mean values with min/max error barspyplot.errorbar(folds,means,yerr=[mins,maxs],fmt='o')# plot the ideal case in a separate colorpyplot.plot(folds,[ideal for_inrange(len(folds))],color='r')# show the plotpyplot.show()
Tying this together, the complete example is listed below.
# sensitivity analysis of k in k-fold cross-validation from numpy import mean from sklearn.datasets import make_classification from sklearn.model_selection import LeaveOneOut from sklearn.model_selection import KFold from sklearn.model_selection import cross_val_score from sklearn.linear_model import LogisticRegression from matplotlib import pyplot # create the dataset def get_dataset(n_samples=100): X, y = make_classification(n_samples=n_samples, n_features=20, n_informative=15, n_redundant=5, random_state=1) return X, y # retrieve the model to be evaluate def get_model(): model = LogisticRegression() return model # evaluate the model using a given test condition def evaluate_model(cv): # get the dataset X, y = get_dataset() # get the model model = get_model() # evaluate the model scores = cross_val_score(model, X, y, scoring='accuracy', cv=cv, n_jobs=-1) # return scores return mean(scores), scores.min(), scores.max() # calculate the ideal test condition ideal, _, _ = evaluate_model(LeaveOneOut()) print('Ideal: %.3f' % ideal) # define folds to test folds = range(2,31) # record mean and min/max of each set of results means, mins, maxs = list(),list(),list() # evaluate each k value for k in folds: # define the test condition cv = KFold(n_splits=k, shuffle=True, random_state=1) # evaluate k value k_mean, k_min, k_max = evaluate_model(cv) # report performance print('> folds=%d, accuracy=%.3f (%.3f,%.3f)' % (k, k_mean, k_min, k_max)) # store mean accuracy means.append(k_mean) # store min and max relative to the mean mins.append(k_mean - k_min) maxs.append(k_max - k_mean) # line plot of k mean values with min/max error bars pyplot.errorbar(folds, means, yerr=[mins, maxs], fmt='o') # plot the ideal case in a separate color pyplot.plot(folds, [ideal for _ in range(len(folds))], color='r') # show the plot pyplot.show()
# sensitivity analysis of k in k-fold cross-validationfrom numpy import meanfrom sklearn.datasets import make_classificationfrom sklearn.model_selection import LeaveOneOutfrom sklearn.model_selection import KFoldfrom sklearn.model_selection import cross_val_scorefrom sklearn.linear_model import LogisticRegressionfrom matplotlib import pyplot# create the datasetdef get_dataset(n_samples=100):X,y=make_classification(n_samples=n_samples,n_features=20,n_informative=15,n_redundant=5,random_state=1)returnX,y# retrieve the model to be evaluatedef get_model():model=LogisticRegression()returnmodel# evaluate the model using a given test conditiondef evaluate_model(cv):# get the datasetX,y=get_dataset()# get the modelmodel=get_model()# evaluate the modelscores=cross_val_score(model,X,y,scoring='accuracy',cv=cv,n_jobs=-1)# return scoresreturnmean(scores),scores.min(),scores.max()# calculate the ideal test conditionideal,_,_=evaluate_model(LeaveOneOut())print('Ideal: %.3f'%ideal)# define folds to testfolds=range(2,31)# record mean and min/max of each set of resultsmeans,mins,maxs=list(),list(),list()# evaluate each k valueforkinfolds:# define the test conditioncv=KFold(n_splits=k,shuffle=True,random_state=1)# evaluate k valuek_mean,k_min,k_max=evaluate_model(cv)# report performanceprint('> folds=%d, accuracy=%.3f (%.3f,%.3f)'%(k,k_mean,k_min,k_max))# store mean accuracymeans.append(k_mean)# store min and max relative to the meanmins.append(k_mean-k_min)maxs.append(k_max-k_mean)# line plot of k mean values with min/max error barspyplot.errorbar(folds,means,yerr=[mins,maxs],fmt='o')# plot the ideal case in a separate colorpyplot.plot(folds,[ideal for_inrange(len(folds))],color='r')# show the plotpyplot.show()
Running the example first reports the LOOCV, then the mean, min, and max accuracy for each k value that was evaluated.
Note: Your results may vary given the stochastic nature of the algorithm or evaluation procedure, or differences in numerical precision. Consider running the example a few times and compare the average outcome.
In this case, we can see that the LOOCV result was about 84 percent, slightly lower than the k=10 result of 85 percent.
A line plot is created comparing the mean accuracy scores to the LOOCV result with the min and max of each result distribution indicated using error bars.
The results suggest that for this model on this dataset, most k values underestimate the performance of the model compared to the ideal case. The results suggest that perhaps k=10 alone is slightly optimistic and perhaps k=13 might be a more accurate estimate.
Line Plot of Mean Accuracy for Cross-Validation k-Values With Error Bars (Blue) vs. the Ideal Case (red)
This provides a template that you can use to perform a sensitivity analysis of k values of your chosen model on your dataset against a given ideal test condition.
Correlation of Test Harness With Target
Once a test harness is chosen, another consideration is how well it matches the ideal test condition across different algorithms.
It is possible that for some algorithms and some configurations, the k-fold cross-validation will be a better approximation of the ideal test condition compared to other algorithms and algorithm configurations.
We can evaluate and report on this relationship explicitly. This can be achieved by calculating how well the k-fold cross-validation results across a range of algorithms match the evaluation of the same algorithms on the ideal test condition.
The Pearson’s correlation coefficient can be calculated between the two groups of scores to measure how closely they match. That is, do they change together in the same ways: when one algorithm looks better than another via k-fold cross-validation, does this hold on the ideal test condition?
We expect to see a strong positive correlation between the scores, such as 0.5 or higher. A low correlation suggests the need to change the k-fold cross-validation test harness to better match the ideal test condition.
First, we can define a function that will create a list of standard machine learning models to evaluate via each test harness.
# get a list of models to evaluate def get_models(): models = list() models.append(LogisticRegression()) models.append(RidgeClassifier()) models.append(SGDClassifier()) models.append(PassiveAggressiveClassifier()) models.append(KNeighborsClassifier()) models.append(DecisionTreeClassifier()) models.append(ExtraTreeClassifier()) models.append(LinearSVC()) models.append(SVC()) models.append(GaussianNB()) models.append(AdaBoostClassifier()) models.append(BaggingClassifier()) models.append(RandomForestClassifier()) models.append(ExtraTreesClassifier()) models.append(GaussianProcessClassifier()) models.append(GradientBoostingClassifier()) models.append(LinearDiscriminantAnalysis()) models.append(QuadraticDiscriminantAnalysis()) return models
12345678910111213141516171819202122
# get a list of models to evaluatedef get_models():models=list()models.append(LogisticRegression())models.append(RidgeClassifier())models.append(SGDClassifier())models.append(PassiveAggressiveClassifier())models.append(KNeighborsClassifier())models.append(DecisionTreeClassifier())models.append(ExtraTreeClassifier())models.append(LinearSVC())models.append(SVC())models.append(GaussianNB())models.append(AdaBoostClassifier())models.append(BaggingClassifier())models.append(RandomForestClassifier())models.append(ExtraTreesClassifier())models.append(GaussianProcessClassifier())models.append(GradientBoostingClassifier())models.append(LinearDiscriminantAnalysis())models.append(QuadraticDiscriminantAnalysis())returnmodels
We will use k=10 for the chosen test harness.
We can then enumerate each model and evaluate it using 10-fold cross-validation and our ideal test condition, in this case, LOOCV.
... # define test conditions ideal_cv = LeaveOneOut() cv = KFold(n_splits=10, shuffle=True, random_state=1) # get the list of models to consider models = get_models() # collect results ideal_results, cv_results = list(), list() # evaluate each model for model in models: # evaluate model using each test condition cv_mean = evaluate_model(cv, model) ideal_mean = evaluate_model(ideal_cv, model) # check for invalid results if isnan(cv_mean) or isnan(ideal_mean): continue # store results cv_results.append(cv_mean) ideal_results.append(ideal_mean) # summarize progress print('>%s: ideal=%.3f, cv=%.3f' % (type(model).__name__, ideal_mean, cv_mean))
123456789101112131415161718192021
...# define test conditionsideal_cv=LeaveOneOut()cv=KFold(n_splits=10,shuffle=True,random_state=1)# get the list of models to considermodels=get_models()# collect resultsideal_results,cv_results=list(),list()# evaluate each modelformodel inmodels:# evaluate model using each test conditioncv_mean=evaluate_model(cv,model)ideal_mean=evaluate_model(ideal_cv,model)# check for invalid resultsifisnan(cv_mean)orisnan(ideal_mean):continue# store resultscv_results.append(cv_mean)ideal_results.append(ideal_mean)# summarize progressprint('>%s: ideal=%.3f, cv=%.3f'%(type(model).__name__,ideal_mean,cv_mean))
We can then calculate the correlation between the mean classification accuracy from the 10-fold cross-validation test harness and the LOOCV test harness.
... # calculate the correlation between each test condition corr, _ = pearsonr(cv_results, ideal_results) print('Correlation: %.3f' % corr)
1234
...# calculate the correlation between each test conditioncorr,_=pearsonr(cv_results,ideal_results)print('Correlation: %.3f'%corr)
Finally, we can create a scatter plot of the two sets of results and draw a line of best fit to visually see how well they change together.
... # scatter plot of results pyplot.scatter(cv_results, ideal_results) # plot the line of best fit coeff, bias = polyfit(cv_results, ideal_results, 1) line = coeff * asarray(cv_results) + bias pyplot.plot(cv_results, line, color='r') # show the plot pyplot.show()
123456789
...# scatter plot of resultspyplot.scatter(cv_results,ideal_results)# plot the line of best fitcoeff,bias=polyfit(cv_results,ideal_results,1)line=coeff *asarray(cv_results)+biaspyplot.plot(cv_results,line,color='r')# show the plotpyplot.show()
Tying all of this together, the complete example is listed below.
# correlation between test harness and ideal test condition from numpy import mean from numpy import isnan from numpy import asarray from numpy import polyfit from scipy.stats import pearsonr from matplotlib import pyplot from sklearn.datasets import make_classification from sklearn.model_selection import KFold from sklearn.model_selection import LeaveOneOut from sklearn.model_selection import cross_val_score from sklearn.linear_model import LogisticRegression from sklearn.linear_model import RidgeClassifier from sklearn.linear_model import SGDClassifier from sklearn.linear_model import PassiveAggressiveClassifier from sklearn.neighbors import KNeighborsClassifier from sklearn.tree import DecisionTreeClassifier from sklearn.tree import ExtraTreeClassifier from sklearn.svm import LinearSVC from sklearn.svm import SVC from sklearn.naive_bayes import GaussianNB from sklearn.ensemble import AdaBoostClassifier from sklearn.ensemble import BaggingClassifier from sklearn.ensemble import RandomForestClassifier from sklearn.ensemble import ExtraTreesClassifier from sklearn.gaussian_process import GaussianProcessClassifier from sklearn.ensemble import GradientBoostingClassifier from sklearn.discriminant_analysis import LinearDiscriminantAnalysis from sklearn.discriminant_analysis import QuadraticDiscriminantAnalysis # create the dataset def get_dataset(n_samples=100): X, y = make_classification(n_samples=n_samples, n_features=20, n_informative=15, n_redundant=5, random_state=1) return X, y # get a list of models to evaluate def get_models(): models = list() models.append(LogisticRegression()) models.append(RidgeClassifier()) models.append(SGDClassifier()) models.append(PassiveAggressiveClassifier()) models.append(KNeighborsClassifier()) models.append(DecisionTreeClassifier()) models.append(ExtraTreeClassifier()) models.append(LinearSVC()) models.append(SVC()) models.append(GaussianNB()) models.append(AdaBoostClassifier()) models.append(BaggingClassifier()) models.append(RandomForestClassifier()) models.append(ExtraTreesClassifier()) models.append(GaussianProcessClassifier()) models.append(GradientBoostingClassifier()) models.append(LinearDiscriminantAnalysis()) models.append(QuadraticDiscriminantAnalysis()) return models # evaluate the model using a given test condition def evaluate_model(cv, model): # get the dataset X, y = get_dataset() # evaluate the model scores = cross_val_score(model, X, y, scoring='accuracy', cv=cv, n_jobs=-1) # return scores return mean(scores) # define test conditions ideal_cv = LeaveOneOut() cv = KFold(n_splits=10, shuffle=True, random_state=1) # get the list of models to consider models = get_models() # collect results ideal_results, cv_results = list(), list() # evaluate each model for model in models: # evaluate model using each test condition cv_mean = evaluate_model(cv, model) ideal_mean = evaluate_model(ideal_cv, model) # check for invalid results if isnan(cv_mean) or isnan(ideal_mean): continue # store results cv_results.append(cv_mean) ideal_results.append(ideal_mean) # summarize progress print('>%s: ideal=%.3f, cv=%.3f' % (type(model).__name__, ideal_mean, cv_mean)) # calculate the correlation between each test condition corr, _ = pearsonr(cv_results, ideal_results) print('Correlation: %.3f' % corr) # scatter plot of results pyplot.scatter(cv_results, ideal_results) # plot the line of best fit coeff, bias = polyfit(cv_results, ideal_results, 1) line = coeff * asarray(cv_results) + bias pyplot.plot(cv_results, line, color='r') # label the plot pyplot.title('10-fold CV vs LOOCV Mean Accuracy') pyplot.xlabel('Mean Accuracy (10-fold CV)') pyplot.ylabel('Mean Accuracy (LOOCV)') # show the plot pyplot.show()
# correlation between test harness and ideal test conditionfrom numpy import meanfrom numpy import isnanfrom numpy import asarrayfrom numpy import polyfitfrom scipy.stats import pearsonrfrom matplotlib import pyplotfrom sklearn.datasets import make_classificationfrom sklearn.model_selection import KFoldfrom sklearn.model_selection import LeaveOneOutfrom sklearn.model_selection import cross_val_scorefrom sklearn.linear_model import LogisticRegressionfrom sklearn.linear_model import RidgeClassifierfrom sklearn.linear_model import SGDClassifierfrom sklearn.linear_model import PassiveAggressiveClassifierfrom sklearn.neighbors import KNeighborsClassifierfrom sklearn.tree import DecisionTreeClassifierfrom sklearn.tree import ExtraTreeClassifierfrom sklearn.svm import LinearSVCfrom sklearn.svm import SVCfrom sklearn.naive_bayes import GaussianNBfrom sklearn.ensemble import AdaBoostClassifierfrom sklearn.ensemble import BaggingClassifierfrom sklearn.ensemble import RandomForestClassifierfrom sklearn.ensemble import ExtraTreesClassifierfrom sklearn.gaussian_process import GaussianProcessClassifierfrom sklearn.ensemble import GradientBoostingClassifierfrom sklearn.discriminant_analysis import LinearDiscriminantAnalysisfrom sklearn.discriminant_analysis import QuadraticDiscriminantAnalysis# create the datasetdef get_dataset(n_samples=100):X,y=make_classification(n_samples=n_samples,n_features=20,n_informative=15,n_redundant=5,random_state=1)returnX,y# get a list of models to evaluatedef get_models():models=list()models.append(LogisticRegression())models.append(RidgeClassifier())models.append(SGDClassifier())models.append(PassiveAggressiveClassifier())models.append(KNeighborsClassifier())models.append(DecisionTreeClassifier())models.append(ExtraTreeClassifier())models.append(LinearSVC())models.append(SVC())models.append(GaussianNB())models.append(AdaBoostClassifier())models.append(BaggingClassifier())models.append(RandomForestClassifier())models.append(ExtraTreesClassifier())models.append(GaussianProcessClassifier())models.append(GradientBoostingClassifier())models.append(LinearDiscriminantAnalysis())models.append(QuadraticDiscriminantAnalysis())returnmodels# evaluate the model using a given test conditiondef evaluate_model(cv,model):# get the datasetX,y=get_dataset()# evaluate the modelscores=cross_val_score(model,X,y,scoring='accuracy',cv=cv,n_jobs=-1)# return scoresreturnmean(scores)# define test conditionsideal_cv=LeaveOneOut()cv=KFold(n_splits=10,shuffle=True,random_state=1)# get the list of models to considermodels=get_models()# collect resultsideal_results,cv_results=list(),list()# evaluate each modelformodel inmodels:# evaluate model using each test conditioncv_mean=evaluate_model(cv,model)ideal_mean=evaluate_model(ideal_cv,model)# check for invalid resultsifisnan(cv_mean)orisnan(ideal_mean):continue# store resultscv_results.append(cv_mean)ideal_results.append(ideal_mean)# summarize progressprint('>%s: ideal=%.3f, cv=%.3f'%(type(model).__name__,ideal_mean,cv_mean))# calculate the correlation between each test conditioncorr,_=pearsonr(cv_results,ideal_results)print('Correlation: %.3f'%corr)# scatter plot of resultspyplot.scatter(cv_results,ideal_results)# plot the line of best fitcoeff,bias=polyfit(cv_results,ideal_results,1)line=coeff *asarray(cv_results)+biaspyplot.plot(cv_results,line,color='r')# label the plotpyplot.title('10-fold CV vs LOOCV Mean Accuracy')pyplot.xlabel('Mean Accuracy (10-fold CV)')pyplot.ylabel('Mean Accuracy (LOOCV)')# show the plotpyplot.show()
Running the example reports the mean classification accuracy for each algorithm calculated via each test harness.
Note: Your results may vary given the stochastic nature of the algorithm or evaluation procedure, or differences in numerical precision. Consider running the example a few times and compare the average outcome.
You may see some warnings that you can safely ignore, such as:
Variables are collinear
1
Variables are collinear
We can see that for some algorithms, the test harness over-estimates the accuracy compared to LOOCV, and in other cases, it under-estimates the accuracy. This is to be expected.
At the end of the run, we can see that the correlation between the two sets of results is reported. In this case, we can see that a correlation of 0.746 is reported, which is a good strong positive correlation. The results suggest that 10-fold cross-validation does provide a good approximation for the LOOCV test harness on this dataset as calculated with 18 popular machine learning algorithms.
Finally, a scatter plot is created comparing the distribution of mean accuracy scores for the test harness (x-axis) vs. the accuracy scores via LOOCV (y-axis).
A red line of best fit is drawn through the results showing the strong linear correlation.
Scatter Plot of Cross-Validation vs. Ideal Test Mean Accuracy With Line of Best Fit
This provides a harness for comparing your chosen test harness to an ideal test condition on your own dataset.
Further Reading
This section provides more resources on the topic if you are looking to go deeper.
Tutorials
A Gentle Introduction to k-fold Cross-Validation
How to Fix k-Fold Cross-Validation for Imbalanced Classification
APIs
sklearn.model_selection.KFold API.
sklearn.model_selection.LeaveOneOut API.
sklearn.model_selection.cross_val_score API.
Articles
Cross-validation (statistics), Wikipedia.
Summary
In this tutorial, you discovered how to configure and evaluate configurations of k-fold cross-validation.
Specifically, you learned:
How to evaluate a machine learning algorithm using k-fold cross-validation on a dataset.
How to perform a sensitivity analysis of k-values for k-fold cross-validation.
How to calculate the correlation between a cross-validation test harness and an ideal test condition.
Do you have any questions? Ask your questions in the comments below and I will do my best to answer.
Discover Fast Machine Learning in Python!
Develop Your Own Models in Minutes
...with just a few lines of scikit-learn code
Learn how in my new Ebook: Machine Learning Mastery With Python
Covers self-study tutorials and end-to-end projects like: Loading data, visualization, modeling, tuning, and much more...
Finally Bring Machine Learning To Your Own Projects
Skip the Academics. Just Results.
See What's Inside
Share Post Share
More On This Topic
How to Configure the Gradient Boosting Algorithm
How to Configure Multilayer Perceptron Network for…
A Gentle Introduction to Mini-Batch Gradient Descent…
How to Configure an Encoder-Decoder Model for Neural…
How to Configure the Number of Layers and Nodes in a…
