How To Cut Your Own Hair (Men). All Questions Answered

Very often, when answering the question of how to cut your own hair men can’t find a comprehensive answer. There’s either so much or so little information that you simply don’t know where to start or how to finish. To help you out with the process of cutting your own hair so that you achieve the best results, we’ve prepared this step-by-step guide. Stick to it and your hair will always look its very best!

ADVERTISEMENT

Pre-Cut Preparations

There are some preparation steps you should take before cutting your own hair. First, you should choose the hairstyle you’re going for. Second, the tools you’re going to use should be in proper working condition. Third, you need to decide on the place where to cut hair, as it should be light, easily cleaned up and contain a lot of mirrors. The bathroom works perfectly in this case. Finally, don’t give yourself a haircut if your hair isn’t freshly washed.

ADVERTISEMENT

Cutting Your Hair At Home: How To

Source: Patry Jordan English via Youtube

So, you’re done with preparation and now it’s time to find out how to cut your own hair men often find challenging. If it’s your first time, just don’t go for an overly elaborate haircut. And don’t give it much thought, as this doesn’t help at all.

Go For A Buzz Cut

Source: @hayden_cassidy via Instagram

Obviously, a buzz cut is one of the easiest ways of cutting hair. To perform it, you need only to choose the length you’re aiming at and know how to trim your own hair, which doesn’t require any special skills, just some sharp clippers and a steady hand. Run the clippers all over the head, clean up the hairline around the neckline and edges and you’re done.

ADVERTISEMENT

Complement With A Fade

Source: @hayden_cassidy via Instagram

For a bit of a style and edge, you might want to enhance your haircut with a fade haircut. However, knowing how to do a fade haircut doesn’t guarantee that you’re going to succeed in it. To perform this DIY haircut, you should also arm yourself with patience and time. Besides, the approach to how to fade your own hair greatly depends on the tools you’re going to use. Some high-quality clippers that have an adjustable blade will do the job right much easier and faster. The most common way of how to fade hair is to alternate the length of your hair by decreasing it gradually from top to bottom using different settings of the clippers.

The Editor's Choice60 Fade Haircut Ideas For A Modern And Sharp Look

How To Cut A Fade Haircut

Source: @hayden_cassidy via Instagram

To cut a fade haircut, you need to stick to the following steps:

1. Choose the beginning of your fade line.
2. Pick out the required guard size depending on the length of the fade.
3. No matter how to fade hair, high or low, it is better to trim it with the clippers, running them up the back and sides.
4. The best way of how to fade hair color gradually and seamlessly is to switch between different guard sizes.
5. Run the trimmer from the bottom of your hair toward the crown but don’t go higher your temples.
6. With the help of a comb, allocate the desired hair length and trim the rest with the clippers.
7. Using the trimmer, create a crisp line along the neckline and hairline.
8. The best approach for how to fade hair color that is too dark is to be conservative and cut little by little, as sometimes it is better to underdo than to overdo.

ADVERTISEMENT

How To Fade Your Own Hair

Of course, it is always better to entrust this task to a professional, as they know much better how to cut men’s hair fade. However, if you are trying to cut your expenses or have not found your perfect barber yet, then you might want to learn how to shave your head. If this is the case, we got your back.

Source: @joeltorresstyle via Instagram

Indicate The Fade Line

The fade line is the indicator of the beginning of tapering. It is important to remember that there are three main fade types: high, medium and low. You are going to buzz all the hair under the fade line with a trimmer to achieve a skin fade look. In case you are not into a bald fade, then the blending should start higher than your ear line and go upward.

Decide On The Guard Size And The Fade Line Length

Now you need to decide what size of the guard is the most suitable for the chosen fade line, which is the indicator of the fade length. The lower the guard size number, the shorter the cut. Not to go reckless, choose between comb attachments #3 and #4. As you are going to move from your neckline toward the crown, this guard size defines how short your fade is going to be.

Fade The Sides First

As soon as all of your hair below the fade line is shaved off, run the trimmer with the necessary comb attachment over your fade line. As you want the cut to be even, the strokes should be short and small. Remember to work toward the top of the head.

Alternate Attachments To Achieve A Gradual Fade

So that the fading tapers smoothly, you need to switch between the clipper combs from shorter to longer sizes as you work your way up. When attaching the next guard, you should run the trimmer from the top of the previously trimmed area, not above it. If hair sections overlap, don’t worry. This will help you to achieve a natural appearance of the cut with minimized layers.

Go On Until You Reach The Top

The final step in fading your hair is blending it into the longish top. As soon as you reach the highest point on your fade, you need to measure the desired length of your hair on top with a comb and cut off the excess using the trimmer.

Clean Up The Hairline And Neckline

Shave the area under your fade line and define your neckline using a trimmer. Use a beard trimmer for more precision and control. Optionally, you can enhance the look with a sharp line up created along the sideburns and temples with an outliner or edgers.

Evaluate The Result

As soon as you are done with cutting your hair, it is time to review how well it has been. Check carefully in the mirror if there are any mistakes and fix them if possible. If you are a complete newbie, it is better to ignore minor flaws not to ruin the result in your attempts to achieve perfection.

Alternative Option: A Regular Taper

Source: @kevinelezaj via Instagram

Alternatively, you can choose another great haircut that doesn’t require any special skills in how to cut hair. This is a regular haircut for men. How to trim hair on the back and sides is actually up to you. The best approach is to begin with more length and then decrease it if needed. On the top, you will give yourself a scissor cut. Take care though that the transition between the sides and the top is gradual.

The Editor's ChoiceWhat Are Haircut Numbers And How To Convert Them Into Haircut Lengths

How to Cut Mens Hair Using Scissors

Cutting your own hair short with scissors is rather a challenging task. However, if you go for a more length, then scissors are indeed your best option. Note though that when performing the cut using scissors, your hair should be damp. First, shape the desired hairstyle. Then, cut the hair with the scissors, moving from the edges to the top. You will need to hold the strands of the hair between the fingers in the following way: with the fingers positioned upright when working with the sides and with the fingers being horizontal when chopping the top. Remember that when your hair is dry, it’s shorter than when it’s wet. So, before cutting off another centimetre, dry your hair and see if you should really proceed.

ADVERTISEMENT

Trimming The Neckline: How To

When cutting your own hair men often fail the proper neckline trimming. So that to succeed in this, there’s arguably no better way than fading it. To do this, you’ll need a three-way mirror and a pair of clippers. Should you decide to go for a rounded or square neckline, make sure you have enough practice, as it’s not as easy as it seems.

Flowbee Haircutting System

The Flowbee Haircutting System is arguably the most hustle free way of how to cut your own hair. The device is extremely easy to use and the result is almost always a success. The Flowbee Hair Cutter is equipped with a hose, ten spacers, power cord, vacuum adapter and blade oil. The spacers, which serve as guards, allow you to cut the hair between 0.5 and 6 inches long. They are attached to the Flowbee Haircutting device, which in its turn, is attached to the vacuum. You then turn on the vacuum and it sucks your hair into the Flowbee head so that the blades would be able to cut it.

Haircut Techniques Based On The Type Of Your Hair

When choosing the way of how to cut your own hair men should also consider the type of hair they have. It also affects the approach to how to layer your own hair.

For the straight hair type, you need to take into consideration that it will shrink when it dries, so take it easy on removing too much hair at once. If you go with overly short and high sides, your hair may stick out, so be careful with that.

Wavy hair also becomes shorter when dry, so keep that in mind when cutting to the desired length. What’s beneficial about wavy hair is that it’s well behaved when it comes to cutting.

Curly hair men get shorter after drying as well. Though, its biggest advantage is that even if you don’t cut it even, it won’t be as obvious as with the other hair textures.

Last but not least, when it comes to kinky hair, you should leave scissors aside, as you won’t be able to comb it. As this type of hair is so fragile and dry, you should ensure that you’ve taken care of it properly beforehand.

ADVERTISEMENT

The Overview Of The Best Tools

No matter how to cut your own hair in layers or even, you should stock up on some special tools, which ensure that the process goes without hassle.

The Editor's ChoiceUnlocking Style: 75+ Trendsetting Boys' Haircuts for 2025

Wahl Lithium Ion Pro Hair Clipper and Trimmer Kit

Courtesy of brand

BUY on Amazon

The question of how to cut my own hair will bother you much less if you arm yourself with one of Wahl clippers. They have superior quality and provide you with the most accurate cut in a blink of an eye. The range of guards allows for the various lengths of the cuts and the smoothest transitions between sections. And if you get in in a kit, you’ll also have your facial hair covered.