How To Drill A Hole In A Ceramic Pot

Drilling a hole in a ceramic pot is a great trick to know when you find the perfect pot that needs drainage. Learn how to do it with this tutorial post!

How to drill a hole in a ceramic pot

Drilling a hole in a ceramic pot—have you done? I thought this would be a great quick tip to share because it addresses a common problem: lots of cute ceramic pots don’t have drainage holes in them.

For Mother’s Day, I treated myself to a few plants. All three are smaller succulents, so I am excited to get one of them in the little $3 pot I show in this post. I had a donkey tail succulent in it, but I recently repotted that. So I decided to use this pot as an example for this easy tutorial!

In this article…

• Necessary supplies
• Steps to drill a hole in a ceramic pot
  • Step 1: Find a masonry bit
  • Step 2: Drill your hole
• Can you drill a hole in a ceramic pot with a regular drill bit?

So here’s what I used:

(Affiliate links below; read more about those here)

• Ceramic pot
• Drill
• Masonry bit

And here’s how to drill a hole in a ceramic pot.

Step 1: Find a masonry bit

We used a masonry bit to drill our hole. Masonry bits are designed specifically for brick, stone, concrete, and similar materials. The masonry bit is different from the regular drill bit your drill came with. Its tip is larger than the bit’s shaft, and when you drill slower with moderate pressure, this helps prevent cracking.

This kind of bit can be used with a regular power drill. We used it on a battery-powered cordless drill—we didn’t need a hammer or corded drill. You can buy a masonry bit for just a few bucks at your local hardware store or on Amazon.

It isn’t a huge investment, but since I didn’t know how often I’d be using a masonry bit, I asked my dad if he had one we could use. Highly recommend phoning a friend or asking a handy neighbor for assistance so you don’t have to buy things you don’t need—most handy people are more than willing to share!

Note: You can also use a tile bit like you’d use to drill in to tile in your bathroom.

Step 2: Drill your hole

Pop your masonry drill bit on to your drill and secure it in place. Make sure you add eye protection, too—you don’t want to mess with flying shrapnel!

I flipped my pot upside down and placed the tip of the drill bit in the center of the pot. Then we applied moderate pressure while drilling down into the ceramic pot with a slow to moderate speed.

If your pot is quite thick, make sure to blow off the ceramic dust as it piles up. My pot was pretty thin, so we were able to easily drill through it in one go. It took only about 10 seconds total.

And here’s my lovely new succulent planted in it! It’s a Calico Kitten Succulent, what do you think? Simple as that, and perfect for a succulent that loves good drainage. If you want a bigger hole, just use a larger drill bit. Or you can drill multiple smaller holes.

If you do that, just make sure the aren’t too close to one another. This could result in the ceramic cracking and potentially breaking out the bottom of the planter.

Can you drill a hole in a ceramic pot with a regular drill bit?

It’s possible to drill a hole in a ceramic pot with a regular drill bit. However, using a regular bit on unglazed ceramic is much easier. Glazed ceramic, which is what most store-bought pots are, will make it hard for the bit to “grab on” to the pot to start drilling the hole.

Additionally, even if you can get through the exterior, if you use a regular drill bit on a ceramic pot you run a greater risk of cracking the pot. The hole could also be a bit rougher looking.

Here is a link to the Dropbox folder with the guide!

Pin my tips for how to drill a hole in a ceramic pot!

Brittany Goldwyn

Brittany is a seasoned DIY home and garden expert, running a creative brand since 2014 that inspires others with approachable plant care guides, sustainable gardening how-tos, and DIY projects. She is a master gardener and certified project manager who has completed extensive coursework in the art and science of growing your own plants. Her favorite thing to do is inspire you! Learn more about her here.