How To Fish A Drop Shot Rig: 12 Steps (with Pictures) - WikiHow
Maybe your like
- Log in / Sign up
- Setting up Your Rig |
- Catching the Fish |
- Video |
- Q&A |
- Things You'll Need
This article was co-authored by Michael Reynolds. Michael Reynolds is a Professional Fishing Instructor and the Owner of Long Beach, California Fishing Lessons by Michael Reynolds. In his over 40 years of fishing experience, Michael has become very knowledgeable about the variety of fishing methods and techniques. He is passionate about sharing his knowledge with beginners to experienced anglers. Michael has been guiding and teaching fishing for over five years and is licensed and bonded with the Department of Fish and Wildlife (DFW). There are 10 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 589,593 times.
A drop shot rig is a popular fishing setup that includes a weighted leader that causes your bait to sink. This style of fishing emulates the natural movement of prey found in the wild and is perfect for catching bottom feeders like bass or catfish. If you tie the rig correctly and use the right technique, you’ll improve your chances of catching fish when using a drop shot rig.
Steps
Part 1 Part 1 of 2:Setting up Your Rig
-
1 Buy a medium or lightweight rod. You can purchase a general light or medium fishing rod online or at a fishing or game store. Getting a lighter weight rod will make it easier to detect bites as you fish. It will also give your rod enough bend, or action, so that when you move the rod, your bait moves in a realistic way.[1] - Manufacturers also create rods specifically made for drop shot fishing, but it isn’t necessary to purchase one to set up your drop shot rig.
-
2 Thread 10–20 lb (4.5–9.1 kg) braided line through the eyelets of your pole. Slide the braided line onto the spool on your pole and turn the reel in a counterclockwise motion to unwind some of the line. Then, take the free end of the line, or the tag end, and run it through the eye on your pole.Pull it out of eye at the tip of your pole so that there’s 8–12 inches (20–30 cm) of excess line.10–20 lb (4.5–9.1 kg) braided line is strong enough to handle the tension from a 5–15 lb (2.3–6.8 kg) fish thrashing at the end of your line.[2] You can purchase braided line online or at a fishing store. Note: Don’t attach your bait directly to braided line because it’s thicker than fluorocarbon and easily visible to many types of fish.
Advertisement -
3 Tie a 15–18 in (380–460 mm) fluorocarbon leader to the braided line. Get 6–8 lb (2.7–3.6 kg) fluorocarbon line for your leader. Use a Unit knot, palomar knot, uni knot, or swivel knot to securely attach the fluorocarbon leader to the braided line. Your weight, hook, and bait will go on this fluorocarbon leader.[3] [4] - Fluorocarbon is lighter and less visible to most fish, which is why you should use it at the end of your line.
- Using a fishing knot will ensure that the leader doesn’t break loose from the braided line.
-
4 Tie the leader to the hook. Use a size 1-2 drop shot hook when setting up your drop shot rig. Thread the tag end of the leader into the eye on the top of the hook, so that you have 6–8 in (15–20 cm) of line to work with. Then, use a palomar knot, swivel knot, or uni knot to secure the hook to the leader.[5] [6] -
5 Thread the tag end back through the other side of the hook. Once you’re finished tying the hook to the leader, you must thread the tag end of the leader back through the other side of the eye to orient the hook correctly. Once you’re done threading the tag end back through the eye, the hook should be pointed upwards and to the side.[7] Tip: Leave 10–12 inches (25–30 cm) of slack at the end of your fishing line so that you can attach the weight.[8]
-
6 Attach a weight to the fluorocarbon leader. Use a 1–3 oz (28–85 g) weight for your drop shot rig. Take the tag end of the leader and thread it through the eye of the weight. Then, pull up on both sides of the line to wedge the line into the eye and secure it. Snip the excess line from the weight with a pair of scissors.[9] - You don’t have to tie a knot to the weight to attach it to the line.
-
7 Attach bait to the hook to finish the rig. You can attach live or artificial bait to the hook. Longer, worm-like baits like worms or minnows are best for a drop-shot rig because their tails undulate in the water. Take the bait and pierce it through the nose. This will give the bait the most realistic movement in the water. - Examples of bait you could use include shrimp, squid, smelt, sardines, minnows, worms, and nightcrawlers.[10]
Advertisement
Catching the Fish
-
1 Cast your line into the water and wait for it to hit the bottom. Rotate the reel so that there’s 10–12 inches (25–30 cm) of excess line coming off the tip of your pole. Firmly hold the handle on the pole and flick your wrist while pressing the release button in the direction that you want to cast.Use your thumb as the break, and watch the lure fly out until it hits the surface of the water.[11] Wait 10-15 seconds for the weight to hit the floor in the lake or river you’re fishing in. You’ll feel a slight thump on your line when the weight hits the bottom of the lake floor.You will catch more fish if you cast your line into areas of the water where you know there is a high density of fish.[12] -
2 Reel in the line so that it’s taught. Rotate the reel ¼ turn clockwise to pull in the line. The line must feel taut or the bait will sink to the lake or river floor. There shouldn’t be any slack or looseness in the line.[13] -
3 Lift the rod to feel for potential bites. Slowly raise up the rod from your elbow and feel for resistance on the line. If there is no resistance or thumps then there are no fish biting on your bait. If you feel a thump or pull on the line, it means that a fish is biting and you skip the next 2 steps and sink the hook.[14] Tip: Use small and slow movements. Fast and jerky movements may look unnatural and scare away the fish.
-
4 Reel in the line 1–2 inches (2.5–5.1 cm) and check it if you don’t get any bites. If you don’t feel anything on your hook, slowly and slightly reel in the line. Then, lift up your rod again for potential bites. If you feel one, you can sink the hook. If not, then repeat this process until you completely reel in your bait.[15] - If you don’t catch anything after casting, repeat the process until you feel more bites.
-
5 Pull the pole up hard to sink the hook once you feel a bite. Once you get a bite on your hook, pull on your rod in an upward direction to sink the hook into the fish. Then, rotate the reel to bring the fish in towards you.[16] - Once you bring the fish to you, net it and remove the hook.
Tip: If the fish is struggling, hold off on rotating the reel and let it tire itself out for a few minutes. Then, once it’s tired, continue reeling it in.
Advertisement
Community Q&A
Search Add New Question- Question Can I use this technique casting out from the shore or does it need to be straight down?
Community Answer You can definitely use this technique from the shore. Keep in mind that you may want to increase the distance between the lure and drop shot weight; the lure will be closer to the bottom when casting because the line is diagonal when fishing vertically. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 6 Helpful 23 - Question Can I use the drop-shot rig with a higher poundage line?
Community Answer Yes, but the diameter of the line may prevent tying the Palomar knot needed to assemble the drop-shot rig. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 14 Helpful 31 - Question What knot should I use to tie the drop shot weight with?
Josh Simonson Community Answer You could use the same palomar knot, but I prefer to use a weaker knot like a cinch knot so that if you snag the sinker it will break off at the knot instead of taking the entire rig. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 13 Helpful 30
Video
Tips
Submit a Tip All tip submissions are carefully reviewed before being published Name Please provide your name and last initial Submit Thanks for submitting a tip for review!Things You’ll Need
- Medium or lightweight rod
- 10–20 lb (4.5–9.1 kg) braided line
- Size 1-2 drop shot hook
- 6–8 lb (2.7–3.6 kg) fluorocarbon line
- Fishing weight
- Bait
You Might Also Like
References
- ↑ https://northernontario.travel/algoma-country
- ↑ https://www.richz.com/fishing/articles/dropshot.html
- ↑ Michael Reynolds. Professional Fishing Instructor. Expert Interview
- ↑ https://www.richz.com/fishing/articles/dropshot.html
- ↑ Michael Reynolds. Professional Fishing Instructor. Expert Interview
- ↑ https://www.richz.com/fishing/articles/dropshot.html
- ↑ https://www.richz.com/fishing/articles/dropshot.html
- ↑ https://youtu.be/7D8fAxJHMiE?t=184
- ↑ https://youtu.be/xuqaAq98BDA?t=83
- ↑ Michael Reynolds. Professional Fishing Instructor. Expert Interview
- ↑ Michael Reynolds. Professional Fishing Instructor. Expert Interview
- ↑ https://youtu.be/HsTG34mywK0?t=23
- ↑ https://youtu.be/HsTG34mywK0?t=37
- ↑ https://youtu.be/HsTG34mywK0?t=49
- ↑ https://youtu.be/HsTG34mywK0?t=89
- ↑ https://youtu.be/E5M7JfVtmZA?t=127
About This Article
To fish a drop shot rig, start by casting your line and waiting for it to hit the bottom of the water you're fishing in. Then, reel the line in slightly so it's taut, and slowly lift up on the rod to feel if there's any resistance. If there's not, reel in the line a couple of inches and check again. If you do feel resistance, that means a fish is biting, so pull up hard on your fishing rod to sink the hook. Then, reel in the line to catch the fish. To learn how to set up a drop shot rig, keep reading! Did this summary help you?YesNo
In other languagesRussian- Send fan mail to authors
Reader Success Stories
-
Charles Franklin
May 26, 2018
"Often wondered how a specific fisherman always caught bass on our lake and I could not. I recently found out that he uses the drop-shot method, which I never heard of. Thanks for your website. "..." more Rated this article:
Did this article help you?
Yes No Advertisement Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy.Charles Franklin
May 26, 2018
"Often wondered how a specific fisherman always caught bass on our lake and I could not. I recently found out that he uses the drop-shot method, which I never heard of. Thanks for your website. "..." more Rated this article:Scott Buckingham
May 1, 2017
"The step-by-step instructions make this fishing technique possible for a fisherman who has never tried it. The pictures make this a no-brainer for me. I can't wait to give this a try."..." moreDavid Hope
Sep 13, 2017
"Excellent. I had seen videos, but none showed how to tie the knot very well. This article was clear and easy to understand."..." more Rated this article:Carnell Jacob
Sep 12, 2016
"I'm fairly new to fishing and I find the topics very informative. I will continue to use wikiHow and tell friends as well."..." moreJason McLeod
May 18, 2016
"The pictures and straight to the point directions were helpful. The Palomar knot was very helpful information." Share yours! More success stories Hide success storiesQuizzes & Games
You Might Also Like
Featured Articles
Trending Articles
Featured Articles
Featured Articles
Watch Articles
Trending Articles
Quizzes & Games
- Categories
- Sports and Fitness
- Outdoor Recreation
- Fishing
- Home
- About wikiHow
- Experts
- Jobs
- Contact Us
- Site Map
- Terms of Use
- Privacy Policy
- Do Not Sell or Share My Info
- Not Selling Info
- Contribute
Follow Us
×wikiHow Tech Help Pro:
Level up your tech skills and stay ahead of the curve
Let's go! X --Tag » How To Fish A Drop Shot
-
Drop Shotting For Idiots - Berkley® Fishing
-
How To Fish The Drop Shot Rig 2 Ways- Bass Fishing - YouTube
-
How Should YOU Fish A Dropshot Rig!?! - YouTube
-
How To Drop Shot (Everything You Need To Know) - YouTube
-
Drop Shot Rig Fishing Tips And Tricks - Karl's Bait & Tackle
-
You Need To Know How To Fish A Dropshot - MeatEater
-
How To Dropshot For Bass - What, Where, And How
-
How To Tie A Drop Shot Rig | Fishing Knots - NetKnots
-
Drop Shotting For Beginners - Angling Times
-
Drop Shot Rig: Drop Shotting For Bass Technique (With Video)
-
Why Drop Shot Bass Fishing Isn't Always Vertical - Wired2Fish
-
Drop Shot Rig: How To Rig Bass Fishing Soft Plastics - Wired2Fish
-
How To Fish The Drop-Shot Rig - MONSTERBASS
-
Drop Shot Bassing - Bass Anglers' Sportfishing Society