How To Fix Peeling Paint On Car - It Still Runs

Maybe your like

How to Fix Peeling Paint on Car by Jeffrey Kinsel

Peeling paint on a car can quickly spread and turn from a small problem into a very large and expensive problem. Getting a car completely repainted can cost hundreds of dollars, but fixing the problem can be done at home with a few steps that can save a lot of money.

Step 1

Determine how much area has been affected by peeling paint. Look at all parts of the car to see how large an area needs to be addressed; this will help you decide how much primer, paint and clear coat to buy.

Step 2

Clean the area to be treated. Use a terry cloth and a cloth scrubber to clean the area that's peeling and at least three inches beyond.

Step 3

Sand the area with fine sandpaper, such as 500 grit. Sand the paint down to the point that the underlying primer starts to come off. Sand the peeling area, continuing out to about two inches beyond it. This will help address the original peeling problem.

Step 4

Prime the area that you've sanded. Apply the primer evenly, and allow it to dry completely before you continue.

Step 5

Match the paint that's already on the car. Look in the owner's manual or inside the driver's-side door, or call the manufacturer, to determine the exact color of the paint and where to buy it. In some cases, automotive-paint dealers can match the color with a chip, but it is better to use the factory color. It may be best to order the paint directly from the car manufacturer, if possible.

Step 6

Paint the sanded and primed area. Apply as many coats as necessary to ensure proper color matching. Allow each coat to dry completely before applying another.

Step 7

Apply the clear-coat finish on top of the base coat, after the proper color is reached. After the clear coat has been allowed to fully cure, wash and wax as usual.

References

Peeling Paint Repairs

Tips

Touch-up kits are a fairly easy solution, but often they do not last as long as the rest of the paint, or they do not match the existing color correctly.

Things You'll Need

Terry cloth
Cloth scrubber
500-grit sandpaper
Automotive primer
Automotive paint
Automotive clear coat

Writer Bio

A student at Southern Utah University majoring in broadcasting and advertising, Jeff Kinsel has been writing for Demand Studios since 2008, and has worked as a writer for various projects since 2006. In addition to writing, Kinsel also does public relations and press release writing.