How To Fold Up An Ironing Board - Oh So Spotless

Wrestling with an ironing board often feels like a rite of passage. You try to close it, it squeaks, sticks, or threatens to pinch your fingers. It is a universal struggle.

However, mastering the mechanism does not have to be scary or difficult. We are here to show you exactly how to fold an ironing board safely so you can put it away without a battle.

Key Takeaways

1. Clear the surface: Always remove the iron and any clothes before attempting to fold.
2. Find the release lever: Locate the lever or catch underneath the wide end of the board.
3. Engage and lower: Press the lever while supporting the board, then lower it gently.
4. Lock it up: Ensure the legs click into the leg lock so the board stays closed during transport.

In This Article

• Ironing Board Types
• Folding Ironing Boards on the Floor
• Safe Folding Tips
• FAQs
• Fold It Safely

Types of Ironing Boards

Not all ironing boards work the same way. While the folding logic is similar, the mechanism changes based on the design. Here is a quick breakdown of the three main styles to help you identify yours.

1. Tabletop Ironing Boards

If you live in a dorm or a studio apartment with limited storage space, a tabletop board is a smart investment. They are lightweight, portable, and usually feature simple folding legs similar to a TV tray.

Tabletops have a smaller surface area, so you place them on a dining table or washing machine to iron. To fold them, you usually just pull the legs inward until they snap flat against the underside of the board. Some models even fold in half at the center for ultra-compact storage.

2. Wall-Mounted Ironing Boards

This is the best option for homeowners who want a permanent solution without the clutter. You never have to worry about unstable legs or finding closet space because the unit stays fixed to the wall.

These boards typically fold up into a cabinet or fold down from a wall bracket. Most use a simple hinge mechanism; you lift the board slightly to release the lock, then guide it up into its vertical storage position.

3. Standing Ironing Boards

This is the most common type found in households. They offer the largest surface area, which makes them ideal for ironing sheets, curtains, or large loads of laundry.

Standing boards rely on a lever system under the board to expand and collapse the legs. They are height-adjustable, allowing you to iron while standing or sitting. Because they are heavier and have moving parts, these are the ones that usually cause the most confusion during folding.

How to Fold an Ironing Board on the Floor

If you are nervous about pinching your fingers or dropping the board, folding it on the floor is the safest method. It gives you full control over the legs.

1. Position the board: Start with the board fully set up in its ironing position.
2. Find the lever: Locate the metal lever press underneath the wider end of the board.
3. Support the board: Place one hand on the lever and use your other hand to hold the opposite edge of the board. Keep your fingers clear of the scissor-leg mechanism.
4. Lower to the floor: Press and hold the lever while gently lowering the entire board flat onto the floor.
5. Release the lock: Once the board is flat against the legs, let go of the lever. This engages the lock to keep the legs folded.
6. Lift and secure: Pick the board up by the nose (the pointed end). Check that the legs are snapped into the leg lock clip before carrying it away.

How to Fold an Ironing Board When Upright

Once you get the hang of it, folding the board while standing is much faster. It uses gravity to do the work for you.

1. Tilt firmly: Hold the lever with one hand and the far edge of the board with the other. Tilt the board backward so it rests on its rear legs.
2. Vertical position: Continue lifting the nose of the board until it points straight at the ceiling.
3. Press and collapse: Squeeze the lever. The legs should slide down and collapse flat against the board automatically.
4. Lock it: Release the lever to lock the legs in place. Ensure the safety clip engages so the legs do not swing open while you walk.

Essential Tips for Safe Folding

To keep your ironing board in good shape (and your fingers intact), keep these tips in mind.

• Clear the deck: Never try to fold the board with the iron still resting on it. It sounds obvious, but it is a common cause of accidents and burns.
• Watch the heat: Let the board cool down for a few minutes if you have been using high steam. The metal mesh underneath can get surprisingly hot.
• Check the squeak: If the lever is hard to press or makes a loud screeching noise, spray a little WD-40 or silicone lubricant on the moving joints.
• Mind the cord: If your board has an attached iron rest or cord holder, fold those in first so they do not snap off during the process.
• Use the nose: Always rest the board on its flat, back legs when folding upright. Never try to balance it on the pointed nose end, as it will slip.

FAQs

Still have questions about your ironing setup? Here are the answers to common issues.

How to Adjust the Height of Your Ironing Board?

Most standing boards are designed to be height-adjustable to prevent back pain. Here is how to customize the fit:

1. Grip the board: Place your hands on opposite sides of the board while it is upright.
2. Press the lever: Locate and squeeze the height adjustment lever underneath.
3. Lift or lower: While holding the lever, pull the board up or push it down to your preferred waist level.
4. Lock in place: Release the lever. You should hear a distinct “click” as the legs settle into the nearest height groove.

How to Fold an Ironing Board That’s Stuck?

If the board refuses to close, the lever mechanism is likely jammed or broken. Try these steps:

1. Flip it over: Lay the board upside down on the floor so the legs are in the air.
2. Manually release: Look for the metal rod connecting the lever to the leg catch. If the lever is broken, use a screwdriver or Allen key to manually push the catch plate to release the legs.
3. Lubricate: If it is just stiff, apply lubricant to the release catch and work it back and forth gently.
4. Re-align: Sometimes the lever bar pops out of its socket. You may be able to snap it back into place with firm pressure.

Ask For Help

If the mechanism is rusted shut or the metal is bent, it is safer to buy a replacement board than to risk the heavy legs snapping shut on your hand.

How Do You Fix an Ironing Board That Won’t Stay Up?

If your board collapses while you iron, the metal catch plate is likely worn out. This is a DIY fix for the handy:

1. Remove the plate: Turn the board over and unscrew the worn metal catch plate.
2. Create a replacement: Cut a new piece of sheet metal to the same size. Wear protective gloves during this step.
3. Drill holes: Drill four holes to match the screw pattern of the original plate.
4. Shape and install: Bend the catch slightly if needed to match the original angle, then screw it firmly into place.

What are the Different Parts of an Ironing Board?

A standard board consists of the surface (often mesh metal), the cover and batting (padding), the legs (usually T-leg or 4-leg style), the lever (height adjustment), and the iron rest (the metal plate at the back).

Which Way Should an Ironing Board Face?

For the best ergonomics, position the board so the pointed end is to your left if you are right-handed (or to your right if you are left-handed). This allows your dominant hand to hold the iron while your other hand adjusts the clothes.

Do You Need a Pad on an Ironing Board?

Yes, a pad is essential. It provides a smooth surface for the iron to glide over, protects your clothes from the metal mesh pattern underneath, and helps absorb excess steam and moisture for a crisp finish.

How Do You Store an Ironing Board?

You can store a folded ironing board by sliding it into the narrow gap between a washer and dryer, hanging it on the back of a door using specialized hooks, or mounting a holder on the wall to keep it off the floor.

Fold It Safely

The most important rule of folding an ironing board is to respect the pinch points. These mechanisms are under tension, so keep your hands clear of the hinges.

Take a moment to practice the “tilt and collapse” method next time you do laundry. Once you find the technique that feels comfortable for you, you will be able to pack up your ironing station in seconds.

Feedback: Was This Article Helpful? 👍 👎 Thank You For Your Feedback! Share Pin Thank You For Your Feedback! What Did You Like? Informative Easy to Understand Engaging Submit What Went Wrong? Inaccurate Missing Information Outdated Submit