How To Get Burn Marks Out Of Carpet - Spot Removal Guide - COIT

How to Fix a Carpet Burn Mark – Method # 1

1. Using scissors, carefully cut the burnt part of the carpet out.
2. Snip away some carpet fibers near a wall or inside a closet (where it won’t be noticeable).
3. Glue the fibers onto the carpet to conceal the burn spot.

How to Get Burn Marks Out of Carpet - Method # 2

1. Using a small pair of scissors, cut out the burned part of the carpet.
2. Using a mild detergent, clean the affected area using a sponge and rinse.
3. Using a piece of scrap carpet cut out an area of the carpet that is larger than the burn spot. To help the new carpet blend in, be sure the color matches and the fibers run in the same direction.
4. Place the new piece of carpet over the burned area.
5. Using a utility knife, cut around the edges. You’ll also want to cut through the carpet below it. When you’re cutting through, stop before you get to the carpet padding.
6. Lift the burnt piece of carpet out. Check to make sure the new piece of carpet fits. If it’s slightly off, trim until it matches the affected area.
7. Using glue or double-sided tape, apply the new piece of carpet to the affected area and let it dry for several hours. Avoid walking on this patch of carpet until it’s dry.

Specific Burn Types: Small Burns vs. Large Burns

Small Burns

For minor burns, like cigarette or candle marks, carefully snip away burnt fibers using small scissors. Lightly sand the remaining area to blend it with surrounding fibers, and consider applying a small amount of baking soda to reduce discoloration. This method minimizes damage, focusing on simple steps to restore appearance.

Large Burns

For larger burns, patching may be necessary. Use scissors to remove the burnt area, then cut a matching piece from a hidden section of the carpet. Apply carpet adhesive to secure the new fibers, creating a seamless patch. This approach is ideal for burns too extensive to fix by trimming alone.

How to Fix Cigarette Burns in Carpet

1. Using sandpaper, gently sand away the burn marks that appear on your carpet.
2. Using a handheld vacuum, get rid of any residue.
3. If you see any black carpet fibers, use scissors to cut these fibers out.
4. You may see visible scorch marks that remain. If so, use a solution that contains 1 part hydrogen peroxide, 10 parts water to remove them.
5. Soak a cloth in this solution and blot the area. Be sure to start on the outside and move into the middle.
6. Rinse the area of the carpet with water and blot dry.
7. Let it dry completely.

Using the above-mentioned do-it-yourself solutions, you’ll find answers to the question of how to get burn marks out of carpet. As with any stain on carpet, the sooner you act, the better chance you have of removing it.For more advanced, professional carpet cleaning that requires advanced equipment and cleaning solutions, give COIT carpet cleaning a call and learn more about our 100% satisfaction guarantee. Don't forget to check out our coupons!

DIY vs. Professional Help

DIY Solutions

For minor burns, DIY methods work well and save money. Techniques like trimming burnt fibers, blending, or creating a small patch often restore the carpet effectively. These methods are best for smaller burns that do not penetrate deep into the carpet.

Professional Services

If the burn is extensive or involves multiple patches, professional carpet repair offers a cleaner, more durable result. Professionals can color-match and install larger patches without visible seams, ensuring a lasting solution. For severe burns, we recommend hiring a professional to maintain your carpet’s quality and appearance.

Remember to always do a spot removal test on a portion of carpet or upholstery that is normally not visible. These are suggested treatments only and COIT can't be held accountable for any damage sustained by the use of the treatments in this spot removal guide.