How To Install Door Stopper? - D&D HARDWARE - Dndhardware
Maybe your like
Step 1. Choose the location for your door stop
You can work out where to install your wall mounted door stop by holding the door stop against the wall and bringing the door close to it. Make sure that the door stop isn’t set too high or low. Also choose a position that isn’t too far away or close to the end of the door.

Step 2. Drill a pilot hole
Before you drill a pilot hole, place the rod section of the door stop flush to the skirting board where you want to install it. Then using your drill put the drill bit through the hole in the rod and make a shallow hole in the skirting board. After removing the rod, drill deep enough into the skirting board so that the screw will fit securely.

Step 3. Assemble and install the door stop
Put the screw through the rod section of the door stop. Then slide the baseplate onto the screw. Use the screwdriver to securely attach the doorstop to the wall. Insert the rubber stopper at the end of the door stop to prevent it from damaging the door.
Tag » How To Install Door Stopper
-
Door Stop Installation | National Hardware - YouTube
-
How To Install A Door Stopper - YouTube
-
How To Install A Hinge Pin Door Stop - YouTube
-
How To Install A Doorstop: 9 Steps (with Pictures) - WikiHow
-
How To Install A Door Stopper (Tips & Common Mistakes)
-
How To Install Door Stopper? (Step-By-Step Tutorial) - WCMA
-
Neoera Magnetic Door Stopper Installation Guidance
-
How To Install A Door Stop
-
How To Install Doorstops (DIY) - The Family Handyman
-
How To Install A Door Stop - Bunnings Australia
-
How To Install A Hinge Door Stopper - Home Utile
-
[PDF] How To - Install Air Cushion Door Stop - Tropex Exports Ltd
-
How To Install Baseboards & Doorstops - True Value