How To Make A Lazy Susan: A DIY Turntable Made Easy - WikiHow

Home » How To Make Lazy Susan » How To Make A Lazy Susan: A DIY Turntable Made Easy - WikiHow

Maybe your like

Skip to ContentQuizzes
  • Home
  • Random
  • Browse Articles
  • Quizzes & Games
  • All QuizzesHot
  • Love Quizzes
  • Personality Quizzes
  • Fun Games
  • Dating Simulator
  • Learn Something New
  • Forums
  • Courses
  • Happiness Hub
  • Explore More
  • Support wikiHow
  • About wikiHow
  • Log in / Sign up
Terms of Use wikiHow is where trusted research and expert knowledge come together. Learn why people trust wikiHow How to Make a Lazy Susan PDF download Download Article Co-authored by Eric McClure Reviewed by Barry Zakar

Last Updated: February 24, 2025 References

PDF download Download Article
  • Setting up Your Jig
    • |
  • Cutting and Sanding Your Boards
    • |
  • Assembling the Turntable Bracket
    • |
  • Tips
    • |
  • Things You'll Need
|Show more |Show less X

This article was reviewed by Barry Zakar and by wikiHow staff writer, Eric McClure. Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University. There are 11 references cited in this article, which can be found at the bottom of the page. This article has been viewed 39,839 times.

Looking to solve your storage needs in the kitchen? Want to wow guests with a custom Lazy Susan at your next dinner party? Building a Lazy Susan is easier than it may seem. A DIY Lazy Susan also happens to be a great introductory woodworking project, since it requires you to make round cuts with a straight blade, but there aren’t too many moving parts. In this article, we’ll walk you through everything you need to do to make a Lazy Susan. We have a list of the hardware you'll need to make a Lazy Susan here.

Steps

Part 1 Part 1 of 3:

Setting up Your Jig

PDF download Download Article
  1. Step 1 Measure the dimensions inside the cabinet where the Lazy Susan will go. 1 Measure the dimensions inside the cabinet where the Lazy Susan will go. Grab a measuring tape and open the cabinet or pantry where you plan on putting the Lazy Susan. Measure the dimensions of the space and jot them down. This way, you won’t accidentally build a tabletop platform that’s too big to sit comfortably where you need it to go.[1]
    • If you are going to display the Lazy Susan (i.e. on a kitchen table or counter), measure the dimensions of that surface instead.
    • There is no “correct” size for a Lazy Susan. So long as it suits your need and fits where you want to store it, it’ll work just fine.
    • Get a rough estimate for the diameter of the Lazy Susan using your measuring tape.
  2. Step 2 Purchase 2 square-shaped boards in the wood of your choice. 2 Purchase 2 square-shaped boards in the wood of your choice. The boards must be at least 1 inch (2.5 cm) thick, and square. Many people opt for MDF or plywood because it’s cheap and easy to work with, but you can choose a higher-quality wood, like ash or cherry, if you really want the Lazy Susan to stand out.[2]
    • You can truncate this process and speed things up by simply buying pre-cut circular boards.
    • You can also cut boards into a square using a circular saw or jigsaw if you have a small woodworking shop and you have wood lying around.
    • Most Lazy Susans that sit inside of a cabinet are 12–20 inches (30–51 cm) in diameter. It depends on the size of the cabinet, though. There are no universal Lazy Susan blueprints.
    • Make sure that your boards are slightly wider than the diameter you’re imagining for your Lazy Susan. If your cabinet is 18 inches (46 cm) deep and wide, you might get boards that are 20 by 20 inches (51 by 51 cm).
    Advertisement
  3. Step 3 Draw diagonally from corner to corner to find the center of the boards. 3 Draw diagonally from corner to corner to find the center of the boards. Take a straight edge and line it up with two opposite corners of the first board. Draw a straight line with a pencil along the edge. Repeat this process on the remaining corners. The intersection where these two lines meet is the center. Mark this location with a small dot.[3]
    • The side you just drew on will be the underside of the top platform.
    • The center is important because your two boards will need to meet at the center if your Lazy Susan is going to spin freely without wobble.
  4. Step 4 Cut a scrap wood strip longer than the radius and cut a groove. 4 Cut a scrap wood strip longer than the radius and cut a groove. Grab a cheap, thin strip of wood and cut it to match the radius of the Lazy Susan, plus 2–3 in (5.1–7.6 cm) or so. Snap or cut the wood strip using a saw.[4] Then, cut a small groove in the strip where the radius ends to hold the blade of your jigsaw and guide it along the line you’re going to cut.
    • This is going to be a key part of your jig—an easy-to-make device that makes it easy to cut perfect circles with a straight-blade saw.
    • You do not need to be “scientific” when it comes to the measurements. So long as the strip is longer than the radius of your Lazy Susan and the groove you cut matches the radius, it’ll work.
  5. Step 5 Nail the center of the strip to the center of the board. 5 Nail the center of the strip to the center of the board. This is why you left an extra 2–3 in (5.1–7.6 cm) on your strip—to nail it into the board. Line the strip up on your board and use a small nail and a hammer or mallet to nail it into the center. Drive the nail deep enough that it won’t pop out while you’re rotating it, but not so deep that you go all the way through the board.[5]
    • If you do accidentally drive the nail all the way through the board, don’t throw it out! You can patch the hole when you’re done, and the hole should still work for your jig.
    • Rotate the strip around your board. Notice how the nail anchors it in place? This is your jig! You can now use the end of the strip as a guide for your saw.
    6. Advertisement
Part 2 Part 2 of 3:

Cutting and Sanding Your Boards

PDF download Download Article
  1. Step 1 Use a jigsaw... 1 Use a jigsaw and the end of the jig to cut a perfect circle out of your wood board. Set your board atop two sawhorses or a workbench. Put on protective eyewear and slide the blade in through the groove you cut on the wood strip. Put your nondominant hand in the middle of the strip and grip the saw with your dominant hand. Pull the trigger and slowly guide the saw around the board to cut out a perfect circle.[6]
    • Use machine screws to attach the guide to the jigsaw (this is what the screw slots are for).
    • You can also free-hand your cut if you aren’t worried about your circle being perfectly round.
    • You can also use a plunge or trim router if you prefer.[7] If you have a really small circular saw, you could probably get away with using that as well.
    • If you have a router, you can buy a special circle-cutting jig like this one from Milescraft to easily cut circles.
  2. Step 2 Repeat this process on the second board using a shorter radius. 2 Repeat this process on the second board using a shorter radius. Remove the jig from your board and repeat this entire process using a radius that’s at least half the size of your larger board, but no bigger than 1 in (2.5 cm) shorter. Draw lines across opposing edges to find the center, trim your jig to make it smaller, and use your jigsaw to cut out the base of your Lazy Susan.[8]
    • The bigger you make the base of your platform, the more stable the Lazy Susan will be. However, the more noticeable the base is, the less “aesthetically pleasing” your Lazy Susan will be.
  3. Step 3 Sand your edges... 3 Sand your edges to give them a cleaner, smoother texture. You can do this a few different ways. You can sand the Lazy Susan by hand for a more rustic, textured look, or use a belt sander to cleanly and quickly smooth the edge out. Aim to round off the edges of each board to avoid scratching yourself when you use it.[9]
    • For the best possible finish, do this multiple times using increasingly finer sandpaper. You might start with 200-grit sandpaper, then move to 600-grit, and finish with 1600-grit sandpaper.
    • If you’re using MDF or plywood, heat-activated wood edging (or iron edging) can give the edges a more professional look. It’s generally pretty hard to sand these materials without chipping them.
    4. Advertisement
Part 3 Part 3 of 3:

Assembling the Turntable Bracket

PDF download Download Article
  1. Step 1 Purchase a square turntable bracket designed for Lazy Susans. 1 Purchase a square turntable bracket designed for Lazy Susans. These are unique brackets designed specifically for this. The turntable bracket looks like two square-shaped metal pieces that rotate on top of one another. Purchase a 3–6 in (7.6–15.2 cm) turntable bracket based on the size of your Lazy Susan.[10]
    • These brackets (also known as bearings) can be kind of tough to find in a big box construction supply store. This bracket from DSMTECH is perfect, although any similar bracket will work.
    • There is one alternative here. There’s a circular bracket out there with rubber on it. You can use this if you want to take the Lazy Susan apart in the future—just put one panel on top of the other and you’re done! It won’t be nearly as stable, though.
  2. Step 2 Punch pilot/reference holes for the bracket into the underside of the larger board. 2 Punch pilot/reference holes for the bracket into the underside of the larger board. Flip the larger board over (side with the pencil marks up) and set the bracket in the center of the board. Turn the two halves of the bracket away from one another to make an 8-point star.[11] Then, use a nail or pilot bit to punch small indentions where the holes on the bracket with one set of holes on it are located.
    • This might be a little confusing at first, so take your time and try to imagine how this works. The part of the bracket with one set of holes will go on the underside of the larger platform, while the bracket with two sets of holes will go on the smaller platform.
  3. Step 3 Drill access points for the bracket through the smaller board. 3 Drill access points for the bracket through the smaller board. Take your smaller platform and set the side up with pencil markings on it. Place the bracket on this platform the exact same way you did on it the top. Use the same set of holes and pilot bit to screw all the way through the smaller board. Then, set the bracket aside and open those holes up using a larger pilot bit or a plunge router.[12]
    • Still a little lost here? Hold the smaller platform on top of the reference points you drove and rotate the smaller platform until you can see each of those points. That’s how you’ll drill the top side into the bracket.
    • The size of the holes doesn’t matter so long as you have enough room to see what you’re doing on the other side when the two boards are stacked together.
  4. Step 4 Screw the turntable bracket into the center of the smaller board. 4 Screw the turntable bracket into the center of the smaller board. Hold the bracket over the center of the board, with the bracket at an angle that does not overlap or touch the access points you drilled. Use a drill to drive wood screws into the holes on the side of the bracket with two holes on it to secure it in place.[13]
    • You can use either set of holes on the bracket depending on the size of your screws.
    • The screws you use depend on the thickness of the board. For 1 in (2.5 cm) thick boards, use 1⁄2 in (1.3 cm) wood screws.
  5. Step 5 Drive screws through the access points to secure the bracket to the top. 5 Drive screws through the access points to secure the bracket to the top. This one can take a little patience and time, since it can be a little tricky. Place the underside of the top board up and turn the base upside down so the bracket is pointing down. Orient the spinning bracket so it lines up with the access points and place them over the pilot holes. Use wood screws to secure the top board to the bracket.[14]
    • Your Lazy Susan should now work! Give it a spin to see how it feels. If it’s a little wobbly, make sure all of your screws are tight and secure.
  6. Step 6 Place rubber pads, rubber strips, or furniture pads on the bottom. 6 Place rubber pads, rubber strips, or furniture pads on the bottom. There are a few ways to do this, but the goal is to put something on the bottom of the Lazy Susan to hold it in place while it spins and protect the surface it’s sitting on. You can use adhesive rubber strips, or double-sided tape to attach rubber pads. Furniture pads will also work if you’re storing anything with weight on top of the Lazy Susan.
    • These non-slip furniture pads from X-Protector are perfect for the job.
    • You can stain or paint the Lazy Susan if you’d like to give it some texture, color, or personality!
    7. Advertisement

Expert Q&A

Search Add New Question Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

Tips

  • The origin of the name “Lazy Susan” is a little odd. During World War I, there was a shortage of house servants. The rotating storage tray was promoted as a way to make things easier for homemakers who were suddenly lacking help. The first advertisement for the tray read, “$8.50 forever seems an impossibly low wage for a good servant; and yet here you are; Lazy Susan, the cleverest waitress in the world, at your service!”[15] Thanks Helpful 0 Not Helpful 1
Submit a Tip All tip submissions are carefully reviewed before being published Name Please provide your name and last initial Submit Thanks for submitting a tip for review! Advertisement

Things You’ll Need

  • Wood boards
  • Wood strip
  • Pencil
  • Straight edge
  • Nail
  • Hammer or mallet
  • Jigsaw, plunge router, or trim router
  • Sawhorses or work table
  • Square bearing bracket
  • Wood screws
  • Pilot bit
  • Drill
  • Rubber pads or strips
  • Stain or paint (optional)

You Might Also Like

Measure for a Lazy SusanA Fast & Easy Guide to Choosing and Measuring for a Lazy Susan Make a Prize WheelHow toMake a Prize Wheel Build a Kitchen TableHow toBuild a Kitchen Table Build a Rocking ChairHow toBuild a Rocking Chair Cut Laminate CountertopHow toCut Laminate Countertop Build Kitchen CabinetsHow toBuild Kitchen Cabinets Make a Tree SeatSimple Ways to Make a Tree Bench (with Pictures) How toBuild a Bookshelf Make a Puzzle Board3 Ways to Build a Wooden or Cardboard Puzzle Board Build a Picnic TableHow toBuild a Picnic Table Build a Garage Work BenchHow toBuild a Garage Work Bench Build a Rotating Canned Food ShelfHow toBuild a Rotating Canned Food Shelf How toMake Wooden Gears Build a Coffee TableHow toBuild a Coffee Table Advertisement

References

  1. ↑ https://www.homenish.com/lazy-susan-cabinet-sizes/
  2. ↑ https://www.youtube.com/watch?v=qs7CRsG024Q&t=147s
  3. ↑ https://www.youtube.com/watch?v=qs7CRsG024Q&t=172s
  4. ↑ https://www.youtube.com/watch?v=qs7CRsG024Q&t=185s
  5. ↑ https://www.youtube.com/watch?v=qs7CRsG024Q&t=185s
  6. ↑ https://www.rockler.com/learn/six-circle-cutting-techniques
  7. ↑ https://www.youtube.com/watch?v=qs7CRsG024Q&t=207s
  8. ↑ https://www.youtube.com/watch?v=qs7CRsG024Q&t=25s
  9. ↑ https://www.highlandwoodworking.com/woodnews/2008july/lazysusan.html
More References (6)
  1. ↑ https://www.highlandwoodworking.com/woodnews/2008july/lazysusan.html
  2. ↑ https://dreamdesigndiy.com/lazy-susan-lazy-painter/
  3. ↑ https://www.youtube.com/watch?v=qs7CRsG024Q&t=454s
  4. ↑ https://www.highlandwoodworking.com/woodnews/2008july/lazysusan.html
  5. ↑ https://www.highlandwoodworking.com/woodnews/2008july/lazysusan.html
  6. ↑ https://www.chicagotribune.com/news/ct-xpm-1996-06-09-9606090211-story.html

About This Article

Barry Zakar Reviewed by: Barry Zakar Handyman This article was reviewed by Barry Zakar and by wikiHow staff writer, Eric McClure. Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University. This article has been viewed 39,839 times. 7 votes - 66% Co-authors: 7 Updated: February 24, 2025 Views: 39,839 Categories: Woodworking In other languagesFrench
  • Print
  • Send fan mail to authors
Thanks to all authors for creating a page that has been read 39,839 times. If you buy through links on our site, we may earn a commission.

Did this article help you?

Yes No Advertisement If you buy through links on our site, we may earn a commission.Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Barry Zakar Reviewed by: Barry Zakar Handyman 7 votes - 66% Click a star to vote Co-authors: 7 Updated: February 24, 2025 Views: 39,839

Quizzes & Games

Finish the Phrase QuizFinish the Phrase QuizTake QuizBedroom Aesthetic QuizBedroom Aesthetic QuizTake QuizEngagement Ring QuizEngagement Ring QuizTake QuizWhat Should I Bake QuizWhat Should I Bake QuizTake QuizWhat Tarot Card Am I QuizWhat Tarot Card Am I QuizTake QuizAm I Smarter than a 5th Grader QuizAm I Smarter than a 5th Grader QuizTake Quiz

You Might Also Like

Measure for a Lazy SusanA Fast & Easy Guide to Choosing and Measuring for a Lazy SusanMake a Prize WheelHow toMake a Prize WheelBuild a Kitchen TableHow toBuild a Kitchen TableBuild a Rocking ChairHow toBuild a Rocking Chair

Trending Articles

Am I Good at Flirting QuizAm I Good at Flirting QuizHow Sexual Am I QuizHow Sexual Am I QuizHow Many Secret Admirers Do I Have QuizHow Many Secret Admirers Do I Have QuizRank My Attractiveness QuizRank My Attractiveness Quiz5 Different Types of Butts: Find Your Shape5 Different Types of Butts: Find Your ShapeWhat Would My Nickname Be QuizWhat Would My Nickname Be Quiz

Watch Articles

Impress a Girl on a First DateHow toImpress a Girl on a First DateWhat Are Tear Burns on TikTok and What Causes Them?What Are Tear Burns on TikTok and What Causes Them?Wear a HoodieHow toWear a HoodieChiffonadeHow toChiffonadeMake a Fabric RoseHow toMake a Fabric RoseConfront a BullyHow toConfront a Bully

Trending Articles

What Is My Intelligence Type QuizWhat Is My Intelligence Type Quiz210+ Shower Thoughts: Funny, Deep, Weird & Mind-Blowing210+ Shower Thoughts: Funny, Deep, Weird & Mind-BlowingTell That Your Crush Likes You BackHow toTell That Your Crush Likes You BackDepression Test for TeensDepression Test for TeensSCP Fight Simulator: Who Will Win?SCP Fight Simulator: Who Will Win?Am I Autistic QuizAm I Autistic Quiz

Quizzes & Games

Pizza CalculatorPizza CalculatorWhat Wild wikiHow Article Am I QuizWhat Wild wikiHow Article Am I QuizTake QuizWhat Instrument Should I Play QuizWhat Instrument Should I Play QuizTake QuizThe Impossible QuizThe Impossible QuizTake QuizAm I Smart QuizAm I Smart QuizTake QuizWhat's the Best Meal Kit for Me QuizWhat's the Best Meal Kit for Me QuizTake Quiz wikiHow
  • Categories
  • Hobbies and Crafts
  • Woodworking
wikiHow Newsletter You're all set! Helpful how-tos delivered toyour inbox every week! Sign me up! By signing up you are agreeing to receive emails according to our privacy policy.
  • Home
  • About wikiHow
  • Experts
  • Jobs
  • Contact Us
  • Site Map
  • Terms of Use
  • Privacy Policy
  • Do Not Sell or Share My Info
  • Not Selling Info
  • Contribute

Follow Us

×

wikiHow Tech Help Pro:

Level up your tech skills and stay ahead of the curve

Let's go! X --459

Tag » How To Make Lazy Susan