How To Mold A Mouth Guard - Step-by-Step Mouthguard Fitting ...

5 Easy Steps to Fit Your Oral Mart Sports Mouth Guard Right

✅ STEP 1Bring water to a rolling boil and turn OFF the stove. Put mouth guard in the boiled water and let it sit for 40 Seconds.

Tips: 1). Do NOT over-boil. 2). Inner gel faces down. 3). Do NOT use microwave to heat up mouth guard. 4). Boiling it right is extremely important so please make sure you watch instructional video below to boil it right.

Note: If it’s a “strapped” mouth guard, you can simply hold the mouth guard carefully by the end strap. Below is the video to boil it right.

✅ STEP 2 Do a Quick Tap Water Dunk for 1 Second “OR” Wave for a Few Seconds to Avoid Burning Mouth. (Cooling Down Too Much Will Affect Your Fitting Experience Dramatically)

Tip: Fitting a mouth guard directly after boiling gives you the best molding experience BUT your safety is more important. Please cool it down quickly only to bring surface temperature to a comfortable level. DON’T cool down too much as your fitting experience will be greatly affected.

✅ STEP 3 Watching in Mirror, Place and Align in Mouth Carefully with the Centerline of Upper Teeth. Bite on It Until Teeth Sink to the Bottom of Inner Gel Completely.

Tips: 1). When biting down, use fingers to hold outer layer and move slowly to the both ends to make sure teeth stay on inner gel. 2). Bite “deeper” for more grips. It’s totally fine to bite through the inner gel layer.

✅ STEP 4 Use Fingers to Press Edges of Mouth Guard Up & Towards Teeth and Gums to Create More Grips.

Tip: This creates more gums and teeth indentations on the side of inner gel layer for more grips.

✅ STEP 5 If You Get a Great Fit, Place Mouth Guard in Cold Water to Set It Fully. Otherwise, Repeat Step 1 through 4.

Tips: 1) There is a learning curve for some new customers who fit mouth guard for the first time. 2). If mouth guard is out of shape after a few tries. Please contact us for customer services.

✅ Remember, we are here to help!!