How To Move An Outlet Up On Walls - EHow

Share

1. Home Sweet Home
2. Home Maintenance & Repairs

How to Move an Outlet Up on Walls By Nichole Liandi Updated Jun 15, 2022 eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here. You can move an outlet up the wall. Image Credit: Dennis Lane/Tetra images/GettyImages

Things You'll Need

• Circuit breaker tester

• Screwdriver

• Outlet box with swing-out mounting tabs

• Pencil

• Keyhole saw

• 14-2 romex cable

• Wire cutters/strippers

• Wire nuts

• Blank outlet cover

• Outlet cover

Wall electrical outlets are typically located 18 inches above the floor. It's possible you may have a need to learn how to move an outlet up on a wall. For instance, you may have a workbench or craft table where easy access to a power outlet would be desirable. Moving the outlet up the wall will take a bit of work, but there's no complicated wiring necessary.

Advertisement

Step 1: Be sure the power is turned off

Turn off the power to the circuit you'll be working on at the home's circuit breaker panel.

Video of the Day

Step 2: Use a circuit tester

You should use a circuit breaker tester before doing any work on the outlet to be sure it is turned off. This device sends a small electrical current through the breaker to test its response. If the breaker is working properly and is turned on, the current will flow freely and the tester will indicate that the circuit is open. If the breaker is not working properly or is turned off, the current won't flow, and the tester will alert you to that fact.

Advertisement

Related Stories

Home Sweet Home Why Is My Pool Blowing Air From the Return Jets? Home Sweet Home Parts for Pull-Down Attic Stairs Home Sweet Home Mold & Mites in the Walls Behind Electrical Outlets

Step 3: Remove the screws

Remove the screw holding the cover plate onto the outlet. Remove the cover. Loosen the screws at the top and bottom of the outlet and pull it out of the outlet box. Loosen the screws on the sides of the outlet and pull the black and white wires off of the outlet. Loosen the screw holding the mounting tabs of the outlet box and pull the box out of the wall.

Advertisement

Step 4: Place the new outlet box

Hold the new outlet box against the wall in the position where you want the new outlet to be located; it needs to be almost directly above its existing spot so that you don't have to deal with a wall stud.

Step 5: Trace and cut around the box

Trace around the box. Cut out the area inside the traced line with a keyhole saw.

Advertisement

Step 6: Add cables and wiring

Push romex cable through the new opening until the end of the wire appears in the bottom opening. Pull several inches of wire out the opening and feed it into the top hole of the outlet box.

Step 7: Prepare the wires

Remove 1 inch of insulation from the black and white wires in the cable. Match the black and white wires of the cable to the black and white wires that were connected to the old outlet. Slide a wire nut over each pair and twist until the nut is holding the wires tightly together.

Advertisement

Step 8: Replace the box

Place the box back into the wall opening and turn the screws for the mounting tabs until the box is securely fastened. Place a blank outlet cover onto the box and attach with screws at the top and bottom.

Step 9: Prepare the cable

Cut the cable off with about 6 inches extending out of the new hole in the wall. Slide the cable through the hole in the bottom of your new outlet box. Place the outlet box in the opening and turn the mounting tabs with a screwdriver to lock the box in place.

Advertisement

Step 10: Remove insulation and prepare wires

Remove about 1/2 inch of insulation from the black and white wires of the cable. Loosen the silver and brass screws on either side of the new outlet. Place the black wire under the brass screw and tighten, and the white wire under the silver screw and tighten.

Step 11: Attach the outlet box and cover

Place the outlet into the outlet box and attach it with its screws at the top and bottom. Place the outlet cover onto the box.

Step 12: Restore the power

Turn the power back on and plug something into the outlet to be sure it works.

Advertisement

Video of the Day

references

• Do It Yourself: Moving an Electrical Outlet Step-By-Step
• Art Plumbing AC and Electric: Do I Need an Electrician to Move an Outlet?

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

you may like

1

How to Get Rid of the Foul Smell in the Window Unit Air Conditioner

2

How to Remove & Replace a Moen Cup Seal and Diverter

3

How to Fix a Laminate Exterior Door

You May Also Like

1

25 Easy Projects to Help Make Your Home Clutter-Free

2

How to Install Brick Around a Window

3

How Do I Disassemble a Moen 103258 Faucet?