How To Paint A Bike (with Pictures) - WikiHow
Maybe your like
- Log in / Sign up
- Prepping the Bike for Painting |
- Hanging the Frame |
- Painting & Reassembly |
- Video |
- Q&A |
- Tips |
- Warnings |
- Things You'll Need
This article was co-authored by Patrick Coye and by wikiHow staff writer, Kyle Hall. Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020. There are 9 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 2,320,562 times.
If the paint on a bike is old or chipped, painting over it with a few fresh coats of paint is a great way to give it a brand-new, glossy look. Fortunately, you don’t have to pay a professional to retouch a bike for you. With the right tools and some time on your hands, you can paint a bike that will turn out looking polished and custom made.
Painting a Bike
- Separate the frame from the rest of the bike.
- Wipe down any residue left on the bike and sand with 120-grit sandpaper.
- Loop a wire or rope through the bike's head tube.
- Use the rope or wire to hang your bike from a tree or outdoor banister.
- Paint your bike, holding the can from 1 foot (0.3 m) away.
- Wait a half hour before applying another coat.
- Continue the process until your bike is completely painted.
Steps
Part 1 Part 1 of 3:Disassembling and Prepping the Bike
-
1 Disassemble your bike until you’re left with just the frame. Remove both wheels, the left and right cranks, the bottom bracket, the front and rear derailleurs, the chain, the brakes, the handlebars, the seat, and the front forks. If you have any attachments on your bike, like a water bottle holder, take the screws off from those too.[1] - Put the screws and tiny parts from the bike in labeled plastic baggies so it’s easier to reassemble it later.
-
2 Remove any labels or decals from the bike frame. You might have a hard time taking them off if they’re old and really stuck on there. If they won’t peel off, use a blow dryer or heat gun to warm them up. The adhesive on the labels will loosen when it’s warmed, making it easier to remove the labels from the frame.[2] - If you’re having trouble peeling a label off with your fingers, use a putty knife to lift the edges of the label up off the frame.[3]
-
3 Wipe down the frame of the bike before you sand it. If there’s any glue residue left over from the decals, spray a product like WD-40 on the frame and wipe off the residue with a cloth. -
4 Sand the frame of the bike so the new coat of paint is able to stick. If the frame has a thick or glossy paint on it, use a low-grit (rough) sandpaper to remove a lot of the old paint. If the frame has a matte paint on it or it’s completely bare, use a high-grit (fine) sandpaper. - Use wire brushes, low grit sandpaper, maybe between 80 to 120 grit sandpaper to prepare the surface.[4] [5]
- You can also use a scraper. Generally, a 5-in-1 painter's tool is very helpful.[6] [7]
-
5 Wipe the bike down thoroughly and let it dry. Use a cloth with soapy water.[8] -
6 Apply painter’s tape to the areas of the frame you don’t want to be painted. There are a few parts of the frame that should be left paint-free:[9] - The posts for the brakes.
- Any bearing surfaces.
- Any threads on the bike where something will need to be screwed in when you reassemble it.
Advertisement
Hanging or Mounting the Frame
-
1 Put together a painting station outside. If you can’t work outside, make sure you set up in a well-ventilated area, like a garage with the garage door open. Lay a tarp or newspaper on the ground to catch any paint that drips. You’ll also want to have a pair of safety goggles and a dust mask on hand. -
2 Hang the bike frame by looping wire or rope through the head tube. If you’re painting outside, look for something to hang the wire or rope from, like a tree branch or a rafter on a covered porch. If you’re working inside, hang the wire or rope from the ceiling. The goal is to hang the frame in a location where you can easily walk around it and paint every side. -
3 Mount the frame on a table if you can’t hang it. Put a broomstick or dowel through the head tube and clamp it onto a table so that the frame is securely elevated in the air off to one of the sides of the table.[10] - If you don’t have a table, you can mount the frame on a desk, stand, or other structure that will hold the bike off the ground.
Advertisement
Painting and Reassembling the Bike
-
1 Use a high-quality spray paint to paint the frame. Look online or in your local hardware store for spray paint that is specifically made for use on metal. Avoid generic brands that will leave the coat on the frame looking uneven. - Never combine different brands of spray paint. The different paints might react badly with each other.[11]
- If you want the bike frame to look matte instead of glossy, look for spray paint that says “matte finish” on the can.
-
2 Spray paint the first coat on the bike frame. Hold the can of spray paint around 1 foot (0.3 m) (30.48 cm) away from the frame while you’re spraying it, and keep the can in constant motion. Avoid spraying continuously in one area, or you will end up with drip marks. Make your way around the entire frame until the whole surface has been covered with paint.[12] - Don’t worry if you still see some of the old paint showing through the first coat. You want to do several thin coats as opposed to one thick coat, so the old paint will be covered up after you apply more coats later on.
-
3 Let the first coat dry for 15-30 minutes before you apply the second coat. Once the first coat is completely dry, repeat the spray-painting process, making sure you get another thin, even coat on the frame. -
4 Continue applying coats of paint until the old frame is completely covered. Always wait 15-30 minutes in between coats. The amount of coats you need will depend on the color and type of spray paint you use. When you can’t see the old paint or metal on the frame, and the new paint looks even, you’ve applied enough coats of paint. -
5 Apply a clear coat to protect the bike from rust and keep it looking new. Wait a few hours after spray painting before you apply the clear coat. Once the frame is completely dry, spray an even layer of clear coat all over the bike, similarly to how you applied the spray paint. - For the best results, apply three coats of clear coat. Let each coat dry for 15-30 minutes before you apply the next one.
- Alternatively, you can use an oxidizing primer made specifically for the metal at the beginning. It will prevent the growth of rust in the future.[13] [14]
-
6 Let the bike frame dry for a full 24 hours. Avoid touching or moving the bike during this period. If you painted outside, check the weather forecast and carefully move the bike inside if it’s going to rain or snow. Once it’s completely dry, go ahead and remove any painter’s tape you put on it during the prepping stages. -
7 Reassemble the bike. Put back on all of the parts you detached from the frame earlier, including the wheels, the bottom bracket, the chain, the left and right cranks, the front and rear derailleurs, the handlebars, the brakes, the seat, and the front forks. Now you’re ready to try out your brand-new looking bike! Advertisement
Community Q&A
Search Add New Question- Question Do I need to use a primer before painting a bike?
Alonzo V Community Answer Without primer, your paint will chip and peel off. The primer bonds the top coat of the bare metal for long-lasting results. I highly recommend using a primer. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 34 Helpful 175 - Question What brand of primer, paint, and lacquer do you recommend?
Community Answer Rustoleum is a good brand, but you can also find other quality paints at your local hardware store. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 37 Helpful 89 - Question Can I apply clear coat paint on the old paint of my bike without sand?
Community Answer No, the new paint won't stick. Sand down the old paint and spray again. Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 18 Helpful 41
Video
Tips
- Use a professional-grade spray paint for the best results. Thanks Helpful 2 Not Helpful 0
- If you’re having trouble sanding down the old layers of paint, try using a paint-removing solution to speed up the process. Thanks Helpful 2 Not Helpful 1
Warnings
- Always wear safety goggles and a mask when working with spray paint.[15] Thanks Helpful 0 Not Helpful 0
Things You'll Need
- Bike
- Tool kit
- Sandpaper
- Soap
- Cleaning cloth
- Putty knife (optional)
- Hair dryer or heat gun (optional)
- Painter’s tape
- Spray paint
- Clear coat
You Might Also Like
References
- ↑ https://www.classiclightweights.co.uk/restoration/how-to-paint-a-bicycle-frame/
- ↑ https://www.classiclightweights.co.uk/restoration/how-to-paint-a-bicycle-frame/
- ↑ https://www.youtube.com/watch?v=antZgmBskMo&feature=youtu.be&t=152
- ↑ https://www.iqsdirectory.com/articles/brush/wire-brush.html
- ↑ Patrick Coye. Painting Specialist. Expert Interview
- ↑ https://www.classiclightweights.co.uk/restoration/how-to-paint-a-bicycle-frame/
- ↑ Patrick Coye. Painting Specialist. Expert Interview
- ↑ https://www.youtube.com/watch?v=antZgmBskMo&feature=youtu.be&t=341
- ↑ https://www.youtube.com/watch?v=antZgmBskMo&feature=youtu.be&t=354
- ↑ http://www.bicycling.com/culture/6-things-to-know-before-you-paint-your-bike
- ↑ http://www.bicycling.com/culture/6-things-to-know-before-you-paint-your-bike
- ↑ https://www.youtube.com/watch?v=antZgmBskMo&feature=youtu.be&t=441
- ↑ https://www.classiclightweights.co.uk/restoration/how-to-paint-a-bicycle-frame/
- ↑ Patrick Coye. Painting Specialist. Expert Interview
- ↑ http://www.bbc.co.uk/homes/diy/safety.shtml
About This Article
To paint a bike, start by disassembling it until you're left with just the frame. Then, sand the frame with a low-grit sandpaper, which will help the paint stick. When you're finished, apply painter's tape to any areas of the frame that you don't want to paint. Next, apply several coats of high-quality spray paint to the bike, letting it dry in between coats. Finally, apply a clear coat and let the bike dry for 24 hours before reassembling it. For tips on hanging your bike so it's easier to paint, scroll down! Did this summary help you?YesNo
In other languages Spanish Portuguese French Chinese Russian German Dutch Indonesian Arabic Korean Hindi Turkish Japanese Italian- Send fan mail to authors
Reader Success Stories
-
Raimonds Mamis
Mar 11, 2017
"This article was helpful with information about the right painting sequence. It is not hard to do, but if you want to do it correctly so that the result is beautiful and with good quality, then is good to know how. That's how this article helped me. Thank you!"..." more
Did this article help you?
Yes No
Advertisement Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Raimonds Mamis
Mar 11, 2017
"This article was helpful with information about the right painting sequence. It is not hard to do, but if you want to do it correctly so that the result is beautiful and with good quality, then is good to know how. That's how this article helped me. Thank you!"..." moreAngle Carpenter
Sep 22, 2016
"I found my Sentinel Horizon bike from the 1970's and wanted to fix it up. How to paint the old gal is knowledge that I did not possess."..." moreChannelly German
Jun 3, 2017
"My grandpa gave me his bike and the paint is chipping off. Also I wanted to add some of my own style to it, and now I know how to."..." moreJude Sackey
Feb 22, 2017
"So far so good. It has given me a clue on how to do something the best way, what to say and how to say it, where and when to act."..." moreAadhil Mubarak
Jul 1, 2017
"Nice. Need more details for the starters like me. Anyway, well done for the editor(s), who made up the job!" Rated this article: Share yours! More success stories Hide success storiesQuizzes & Games
You Might Also Like
Featured Articles
Trending Articles
Featured Articles
Featured Articles
Watch Articles
Trending Articles
Quizzes & Games
- Categories
- Cars & Other Vehicles
- Cycling
- Bicycles
- Home
- About wikiHow
- Experts
- Jobs
- Contact Us
- Site Map
- Terms of Use
- Privacy Policy
- Do Not Sell or Share My Info
- Not Selling Info
- Contribute
Follow Us
×Don’t miss out! Sign up for
wikiHow’s newsletter
Subscribe You're all set! X --Tag » How To Paint A Bike Frame
-
Paint A Bike Frame : 6 Steps (with Pictures) - Instructables
-
How To Custom Paint A Bike Like A Pro With Some Help ... - YouTube
-
Spray Paint A Bike At Home With Supreme Quality DIY - YouTube
-
How To Refurbish And Respray Your Bike Frame - BikeRadar
-
How To Paint A Bike: 6 Steps For The Perfect Custom Look
-
A DIY Guide: How To Paint A Bike Frame
-
How To Paint A Bike - A Detailed Guide On How To Repaint A Bike ...
-
Old Frame New Paint, Who Dis?. Lessons Learned From Painting A Bike…
-
How To Spray Paint A Bike
-
How To Spray Paint A Bike: Avoid Common Mistakes - Craftknights
-
How To Paint A Bike Frame In 6 Easy & Simple Steps - Biketoworkday
-
Bicycle Frame Refinishing - Sheldon Brown
-
How To Touch Up Chips And Scratches In Your Bike's Paint